URC-3220-R Remote Control User Guide

Getting Started

1. Insert Batteries: Remove the battery cover. Insert 2 AAA batteries, matching the '+' and '-' marks. Replace the battery cover.

Tip: The POWER button will blink 5 times when batteries need replacement.

Setup Methods

Setup Method A: Popular Brands

Note: Ensure the TV is ON before starting setup.

1. Press and hold SETUP until the POWER button blinks twice.
2. Press the POWER button.
3. Press and hold the DIGIT button for your TV brand.
4. Release the button when your TV turns off. Setup is complete.

Success Indicator: 2 blinks = Success (?), 1 long blink = Failure (?)

Setup Method B: Code Search

1. Press and hold SETUP until the POWER button blinks twice.
2. Press the POWER button.
3. Press and hold the SELECT button.
4. Release the SELECT button when the TV turns off.

Setup Method C: Direct Code Entry

Note: Ensure the TV is ON before starting setup.

1. Press and hold SETUP until the POWER button blinks twice.
2. Enter the 1st TV code for your brand from the code list.
3. Press the POWER button to test TV control. If the TV turns off, setup is complete.
4. If the TV does not turn off, repeat with the next code for your TV brand.

Tip: For the exact code for your TV, use the CODE FINDER tool at REMOTES.COX.COM.

Write the working TV code here for future use: ____________________

Functional Key Chart

• POWER: Turns TV ON/OFF. Hold for 3 seconds to enter programming.
• COX Button: Not specified in detail, but used in Setup Method B.
• GUIDE: Displays program guide.
• Navigation Buttons (Arrows, SELECT, EXIT): Use to navigate and select menu and guide options. EXIT exits the current menu.
• ZOOM: Press to stretch or shrink screen size horizontally and vertically.
• VOLUME +/-: Turns volume up and down.
• MUTE: Mutes the TV volume.
• DIGIT Buttons (0-9): Allows for direct access to specific channels.
• PAGE +/-: Use to tune channel up or down, also used for page navigation in the guide.
• LAST: Recalls the last channel viewed.
• INFO: Displays information for the currently selected program.
• CC: Press to turn closed captions on or off.
• INPUT: Used to cycle through video inputs on TV.

Troubleshooting

• Problem: The POWER button does not blink when a button is pressed.
  Solution: Replace batteries.
• Problem: TV does not respond when POWER or VOLUME buttons are pressed.
  Solution: Program the remote control for your TV brand using instructions in Setup Method A, B, or C.
• Problem: Tried all codes for my TV brand and none work.
  Solution: Try CODE SEARCH (Setup Method B) or visit REMOTES.COX.COM for additional support and the CODE FINDER search tool.

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC regulations, shielded cables must be used with this equipment. Use with unauthorized equipment or unshielded cables may cause interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user's authority to operate this equipment.

Este equipo ha sido probado y cumple con los límites para un dispositivo digital de clase B, según la parte 15 de las Normas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra las interferencias perjudiciales en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no hay garantía de que no se produzcan interferencias en una instalación en particular. Si este equipo causa interferencias perjudiciales en la radio o televisión, lo cual puede comprobarse encendiéndolo y apagándolo, se recomienda al usuario que intente corregir la interferencia mediante una o más de las siguientes medidas:

• Reorientar o reubicar la antena receptora.
• Aumentar la separación entre el equipo y el receptor.
• Conectar el equipo a una toma de corriente o un circuito distinto de aquel al que está conectado el receptor.
• Consulte al distribuidor o a un técnico de radio/TV con experiencia para obtener ayuda.

Con el fin de mantener el cumplimiento con las regulaciones de la FCC, los cables blindados deben ser utilizados con este equipo. Utilización con equipos no autorizados o cables no blindados puede causar interferencias en la recepción de radio y TV. Se advierte al usuario que los cambios y modificaciones realizados en el equipo sin la aprobación del fabricante pueden anular la autoridad del usuario para utilizar este equipo.