Moshi Orbito Bluetooth TX Audio Adapter

Pairing

The adapter pairs with the closest Bluetooth device in pairing mode. To pair the adapter, initiate pairing mode on a Bluetooth headphone or speaker, then activate pairing mode on the flight adapter.

To do this, ensure the adapter is powered OFF, then press and hold the power button for 4 seconds. When pairing begins, 12 LEDs will flash. Once the device is found and connection starts, an electronic marquee will display.

[Illustration: Moshi Orbito adapter connected wirelessly to earbuds via Bluetooth symbol]

[Diagram: Adapter with options for 'Single Socket' and 'Duo Socket' connections]

Battery & Charging

The adapter provides up to 24 hours of battery life on a full charge. Connect a charger or power bank to the USB-C port using the included USB-C cable.

[Illustration: Adapter highlighting the USB-C port for charging]

[Visual: Adapter LED indicators showing 'Full Charged Status' and 'Half Charged Status']

Compliance Information

FCC and IC Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The license-exempt transmitter/receiver contained in this apparatus complies with Innovation, Science and Economic Development Canada's license-exempt CNR(s). Operation is authorized subject to the following two conditions: (1) The apparatus may not cause interference; (2) The apparatus must accept any radio interference, including interference that may compromise the operation of the device.