Creole Feast Premium Rolling Cooler Owner's Manual

For Your Safety

Read the instructions before assembling and using the appliance.

DO NOT use the appliance unless it is completely assembled, and all the parts are securely fastened.

Keep away from children and pets.

Caution Points

• Always place the cooler on a hard and level surface that will support its loaded weight.
• Keep children and pets away from the cooler, especially when loaded with ice and beverages.
• The cooler is not intended for use as a cart to transport other objects.
• When the cooler is in the desired position, secure two locking casters.
• Please do not exceed the usage capacity of this item.
• Do not use or store the cooler near combustible materials, gasoline, and other flammable vapors and liquids.
• Do not use this item in a way inconsistent with the manufacturer's instructions, as this could void the product warranty.

NOTE: It is normal that some artificial smell may appear during the first use. Open the cooler and expose it to fresh air, then the odor will dissipate soon.

Operating and Maintenance

The non-electric cooler is designed to keep food or beverages either cool or warm outdoors.

For Better Use (Maximize Ice Lifespan)

• Pre-chill cooler for hours before use.
• Pre-freeze food and beverages.
• Pack efficiently with the coldest ice.
• Avoid opening frequently.
• Avoid direct sunlight.

NOTE: If ice starts to melt during use, don't drain water out, as cold water melted from ice helps insulate the remaining ice.

Cleaning / Maintenance / Storage

All cleaning and maintenance should be carried out after each use and before storage.

• For routine care, clean with warm water and a cloth.
• For tougher dirt, clean with mild soap water and a cloth.
• Never use abrasive cleaners or scrub pads.
• Dry the cooler with a towel or cloth to prevent water spots.
• Store in a cool and dry place away from children and pets.

Assembly Instructions

Parts and Hardware List

• Swivel caster A (2 PCS)
• Locking swivel caster B (2 PCS)
• Leg assembly C (2 PCS)
• Wrench D (1 PC)
• Bolt E (8 PCS)
• Cap catcher F (1 PC)
• Cooler body G (1 PC)
• Basket H (1 PC)
• Screwdriver I (1 PC)

Assembly Steps

1. Step 1: Attach swivel casters (A) and locking swivel casters (B) to leg assemblies (C) using bolts (E) and wrench (D).
2. Step 2: Attach leg assemblies (with casters) to the cooler body (G) using bolts (E) and screwdriver (I).
3. Step 3: Attach basket (H) to the leg assemblies.
4. Step 4: Attach cap catcher (F) to the cooler body (G).

Customer Service

For any questions or if you need parts, please contact Creole Feast customer service:

• Phone: ? 1-800-618-6798
• Email: ✉️ service@creolefeast.com
• Hours: ⏰ Mon-Fri, 8:30 AM-5:30 PM, EST

Learn more at: www.creolefeast.com

¡Cualquier problema! ¡Podemos ayudar!