ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Tivoli ELITE VHO TivoTape

ZERO DROP TECHNOLOGY

A high-output, energy-efficient LED lighting solution.

Brand: Tivoli

Product Line: ELITE VHO TivoTape™

Description: A detailed specification document for the Tivoli ELITE VHO TivoTape, a professional-grade LED lighting product known for its high output and advanced features.

Product Overview & Features

The Tivoli ELITE VHO TivoTape is designed for high-performance illumination, featuring:

Low bin tolerance with a 1.5 Step McAdam Elipse standard
Factory produced with Tivoli's eXo Shield coating
High CRI value (90+)
Factory soldered lead wire
IP67 Wet location available
Multiple mounting channel options
Large range of available Kelvin temperatures
Low lead times
4oz. Copper Trace
5 Year warranty

Dimensions: The LED tape has a width of 15/32 inches (approximately 12mm) and can be cut at 15/16 inch intervals. The tape is designed for 24V DC operation.

The product is UL Listed.

Order Guide

The product code structure for the ELITE VHO TivoTape is as follows:

TPLE-INTENSITY-INSTALL-LED COLOR-LENGTH-VOLTAGE

Key components:

TPLE: TivoTape ELITE
INTENSITY: VHO (Very High Output)
INSTALL: I (Indoor)
LED COLOR: 22 (2200K), 24 (2400K), 27 (2700K)
LENGTH: R (Full Roll - 164'), MR (Maximum Run - 13')
VOLTAGE: 24 (24V DC)

A layout/drawing must accompany each order showing run length and location. Runs with LEAD-C are rounded up to the next cut interval, while runs with LEAD-D are rounded down.

Specifications

Specification	Value (2200K)	Value (2400K)	Value (2700K)
Kelvin Temperature	2200K	2400K	2700K
Lumens/ft	686	728	763
Efficacy (Lm/W)	98	104	109
Color Rendering Index (CRI)	90+
Input Voltage	24V DC
Power Supply	Class 2
Power Consumption W/ft	7 W/ft
Maximum Run Length	13'
Maximum Run Length (JA8)	11'
Wire Size (End Prep)	18 AWG, 2 wire
Dimming	MLV/ELV/0-10V
LED Package	2835
LEDs/ft	73
Adhesive	3M VHB Tape
Copper Trace	4 Ounce
Dimensions	15/32" (12mm) width, 15/16" cut increments
Operating Temperature	-40°F (-40°C) to +140°F (+60°C)
Certification	UL Listed
Lumen Maintenance (L70) Hours	60,000
Binning Tolerance	1.5 Step MacAdam Elipse
Environment	IP54 Damp Location, Conformal eXo Shield Coated
Warranty	5 years

Photometrics (Based on 3000K)

The photometric data indicates the light distribution characteristics of the ELITE VHO TivoTape. The maximum candela is 272.78, located at horizontal angle 0 and vertical angle 0. The data is presented for a vertical plane and a vertical cone.

Distance	Center Beam FC	Beam Width
1.0 FT	204.5 FC	1.0 FT
2.0 FT	51 FC	2.0 FT
4.0 FT	14.6 FC	3.0 FT
6.0 FT	5.9 FC	5.0 FT
8.0 FT	3.1 FC	7.0 FT
10.0 FT	2.1 FC	8.0 FT

Power Leads and Jumpers

Factory Installed Options

TPL-I-LEAD-2-C (LEAD/END): 24" standard 2 conductor 18AWG lead wire factory attached to one end of tape.
TPL-I-LEAD-2-D (LEAD/LEAD): 24" standard 2 conductor 18AWG lead wire factory attached to both ends of tape.
TPL-I-XEP-2 (EXTRA LEAD WIRE): Additional factory attached 18AWG lead 2 wire to extend lengths of LEAD-C and LEAD-D up to 20 ft. max. Sold per foot.
TPL-I-CONN (18-22AWG BUTT CONNECTORS): Used to interconnect factory attached lead wires. Sold individually.

In-Field Connection Options (Snap Power Lead and Jumpers)

TPL-I-12-SNP-LEAD-XX: XX = 12 (12"), 60 (60"). 2 conductor 20AWG lead wire field attached. Sold 10pcs.
TPL-I-12-SNP-JUMPER-6: 6" 2 conductor 20AWG jumper wire field attached. Sold 10pcs.
TPL-I-12-SNP-JOINER: 2 conductor joiner field attached. Sold 10pcs.

Compatible Extrusions

A variety of extrusions are available to complement the ELITE VHO TivoTape, designed to fit 12mm snap connectors. Descriptions include material and available lengths.

MCHAN-8-LP: Low profile NO LENS OPTION, clear polycarbonate, length 8'.
TPL-I-45-MCH-8-S: White PVC, 45° NO LENS, length 8'.
DWAR-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
EDGE-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
MINI-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
MOFT-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
DYER-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
WRNR-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
NOYS-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
VALN-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
DOME-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
ALTN-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
MRSL-CHAN-SLV-6.5: Anodized aluminum extrusion, available in 6.5' length.
HRIZ-CHAN-SLV-6.5: Anodized aluminum extrusion, available in 6.5' length.
ASTR-CHAN-SLV-6.5: Anodized aluminum extrusion, available in 6.5' length.
INF-X-CHAN-8: X = C (clear), F (frosted) PC extrusion, available in 8' lengths.
COTA-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
CARU-CHAN-SLV-6.5: Anodized aluminum extrusion, available in 6.5' lengths.
HAYS-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
DUET-04-CHAN-XXX-6.5: XXX = SLV (silver), WHT (white), GLD (gold), BLK (black). Aluminum extrusion, 6.5' Length.
DUET-04-CHAN-M-6.5: Mud-In PC fire-proof extrusion, 6.5' Length. (Note: DUET-04-CHAN-SLV-6.5 and DUET-04-CHAN-M-6.5 are required for mud-in application).
DUET-04-CHAN-SLV-6.5: Anodized aluminum extrusion, available in 6.5' length. (Note: DUET-04-CHAN-SLV-6.5 and DUET-04-LNS-R-XXX-6.5 are required for recessed application).
FRE-CHAN-SLV-6.5: Anodized Aluminum Extrusion, available in 6.5' lengths.
RIDG-CHAN-SLV-8: Anodized Aluminum Extrusion, length 8'.
TPL-I-45-MCH-8: White PVC 45° extrusion.
INF-X-LNS-8: X = C (clear), F (frosted) Polycarbonate lense, available in 8' length.
ANZI-CHAN-XXX-6.5: XXX=SLV (Silver), BLK (Black), WHT (White). Anodized Aluminum Extrusion, available in 6.5' lengths.

In-Wall Controls

Tivoli offers in-wall control solutions for the ELITE VHO TivoTape:

TVOQ-1-WH: White Touchscreen controller.
TVOQ-10-XX-7: XX = BK (Black), WH (White). Touchscreen controller.
TVOQ-2-BK: Black Touchscreen controller.

Power Supplies

A range of power supplies are available to power the ELITE VHO TivoTape system.

INFINITY - MLV / ELV / 0-10V / PWM / TRIAC

Description	CAT NO	APPLICATION	PRIMARY VOLTAGE	SECONDARY VOLTAGE	CIRCUIT BREAKERS	MAX LOAD	MIN LOAD	CIRCUIT CAPACITY
Infinity Series Class 2 Transformer	INF-J-30-1-1.3-24	Indoor / Outdoor	100 - 277V AC	24V DC	1	30W	3W	1.3A
	INF-J-60-1-2.5-24				1	60W	6W	2.5A
	INF-J-96-1-4-24				1	96W	9W	4A
	INF-J-192-2-4-24				2	2x96W	2x9W	2x4A
	INF-J-288-3-4-24				3	3x96W	3x9W	3x4A

ER Series

Description	CAT NO	APPLICATION	PRIMARY VOLTAGE	SECONDARY VOLTAGE	CIRCUIT BREAKERS	MAX LOAD	CIRCUIT CAPACITY
ER Series Class 2 Driver	ER-80-1-3.3-24-D	Indoor / Outdoor	100-277V AC 50/60 Hz	24V DC	1	80W	3.3A
ER Series Class 2 0-10V Dimming	ERG-80-24-DIM1-10

ADUL/ADNM - NON DIMMING

Description	CAT NO	APPLICATION	PRIMARY VOLTAGE	SECONDARY VOLTAGE	CIRCUIT BREAKERS	MAX LOAD	CIRCUIT CAPACITY
ADUL/ADNM Series Class 2 Transformer	ADNM-90-1-4-24-D	Indoor / Outdoor	100-277V AC 50/60 HZ	24V DC	1	90W	3.75A
	ADUL-120-1-4-24-D	Indoor			1	96W	4A
	ADUL-240-2-4-24-D	Indoor			2	2x96W	2x4A
	ADUL-320-3-4-24-D	Indoor			3	3x96W	3x4A

ADUL/ADNM - 0-10V DIMMING

Description	CAT NO	APPLICATION	PRIMARY VOLTAGE	SECONDARY VOLTAGE	CIRCUIT BREAKERS	MAX LOAD	CIRCUIT CAPACITY
ADUL/ADNM Series Class 2 Transformer	ADNM-90-1-4-24-DOT	Indoor/Outdoor	100-277V AC 50/60 HZ	24V DC	1	90W	3.75A
	ADUL-120-1-4-24-DOT	Indoor			1	96W	4A
	ADUL-240-2-4-24-DOT	Indoor			2	2x96W	2x4A
	ADUL-320-3-4-24-DOT	Indoor			3	3x96W	3x4A

ADUL/ADNM - DMX SINGLE ADDRESS

Description	CAT NO	APPLICATION	PRIMARY VOLTAGE	SECONDARY VOLTAGE	CIRCUIT BREAKERS	MAX LOAD	CIRCUIT CAPACITY
ADUL/ADNM Series Class 2 Transformer	ADNM-90-1-4-24-DIN	Indoor/Outdoor	100-277V AC 50/60 Hz	24V DC	1	90W	3.75A
	ADUL-120-1-4-24-DIN	Indoor			1	96W	4A
	ADUL-240-2-4-24-DIN	Indoor			2	2x96W	2x4A
	ADUL-320-3-4-24-DIN	Indoor			3	3x96W	3x4A

ADUL - DMX MULTI ADDRESS

Description	CAT NO	APPLICATION	PRIMARY VOLTAGE	SECONDARY VOLTAGE	CIRCUIT BREAKERS	MAX LOAD	CIRCUIT CAPACITY
ADUL Series Class 2 Transformer	ADUL-240-2-4-24-DIN-2	Indoor	100-277V AC 50/60 Hz	24V DC	2	2x96W	2x4A
	ADUL-320-3-4-24-DIN-3	Indoor			3	3x96W	3x4A

ADNM - DMX/DALI FLICKER-FREE FOR TV STUDIO

Description	CAT NO	APPLICATION	PRIMARY VOLTAGE	SECONDARY VOLTAGE	CIRCUIT BREAKERS	MAX LOAD	CIRCUIT CAPACITY
ADNM Series Class 2 Transformer	ADNM-120-1-4-24-DTV	Indoor / Outdoor	100-277V AC 50/60 HZ	24V DC	1	1x96W	1x4A
	ADNM-240-2-4-24-DTV				2	2x96W	2x4A
	ADNM-320-3-4-24-DTV				3	3x96W	3x4A

Dimmers

DIMMING - 0-10V

DESCRIPTION	CAT NO	APPLICATION	INPUT VOLTAGE	OUTPUT VOLTAGE	MAX LOAD
0-10V Dimmer	DIM-LD-010	Indoor	12V/24V DC	12V/24V DC	30 mA max. output (sink only)

DIMMING -MLV

DESCRIPTION	CAT NO	APPLICATION	INPUT VOLTAGE	OUTPUT VOLTAGE	MAX LOAD
MLV Dimmer	N-600	Indoor	120V AC	120V AC	450W
	N-1000				800W
	N-1500				1200W
	D-600				450W
	M-600				450W
	M-1000				800W

DIMMING - ELV

DESCRIPTION	CAT NO	APPLICATION	INPUT VOLTAGE	OUTPUT VOLTAGE	MAX LOAD
ELV Dimmer	ME-600	Indoor	120V AC	120V AC	450W
	DE-300				300W

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 9 Pages, 1.82MB

4324-TivoTape ELITE VHO 08-18-25 Adobe PDF Library 17.0 Adobe InDesign 20.5 (Windows)

Related Documents

	Tivoli 24V Pro Indoor LED Lighting System - Specifications and Features Comprehensive guide to the Tivoli 24V Pro Indoor LED lighting system, detailing features, specifications, compatible extrusions, power supplies, and dimmers for architectural and indoor lighting applications.
	Tivoli HO Outdoor ELITE TivoTape™ - High Output LED Tape Discover the Tivoli HO Outdoor ELITE TivoTape™, a high-performance LED lighting solution featuring Zero Drop Technology, 1.5 Step McAdam Ellipse binning, and 4oz. copper trace for consistent illumination. Ideal for outdoor applications with IP67 rating and eXo Shield coating. Explore specifications, dimensions, and compatible accessories.
	Tivoli ELITE HO TivoTape: 24V Indoor LED Tape Light Specifications Comprehensive specifications, features, order guide, compatible extrusions, and power supply details for Tivoli's 24V ELITE HO TivoTape, featuring Zero Drop Technology and high CRI for professional lighting applications.
	Tivoli 24V FLOW Outdoor LED Lighting Specification Detailed specifications for Tivoli's 24V FLOW Outdoor LED strip lighting system, featuring dim-to-warm capabilities, high efficacy, IP67 rating, and various compatible accessories for versatile installation.
	Tivoli 24V VISION Indoor LED Tape Light Specifications and Accessories Comprehensive technical specifications and product catalog for Tivoli's 24V VISION Indoor LED tape lighting system, detailing features, order guides, compatible extrusions, power supplies, and dimmers.
	Tivoli Eos Inspire Series Chandelier Datasheet \| High-Efficiency LED Lighting Detailed specifications, ordering guide, and power supply options for the Tivoli Eos Inspire Series chandelier. Features high luminous efficiency, UV-stabilized silicone, and 24V DC operation.
	Tivoli FLEX120 120V LED Tape Light - Specifications and Data Detailed specifications, photometrics, TM-30 data, and accessory information for the Tivoli FLEX120 120V LED tape light. Includes order guide, dimensions, and compatibility.
	Tivoli ELITE HO Outdoor TivoTape: High Output LED Tape Specifications Explore the Tivoli ELITE HO Outdoor TivoTape, a high-performance LED lighting solution featuring Zero Drop Technology, IP67 rating, and exceptional color rendering. This document details specifications, photometrics, TM-30 data, compatible accessories, power supplies, and dimmers for architectural and outdoor lighting applications.