YITAHOME Metal Four Poster Canopy Bed Frame Assembly Instructions
Model Numbers: FTBFBF-0009, FTBFBF-0010, FTBFBF-0011, FTBFBF-0047, FTBFBF-0048, FTBFBF-0049, FTBFBF-0054, FTBFBF-0055
Important Assembly Notes
- Two or more people are required for assembly.
- To avoid squeaking, please tighten the bolts all the way. Using an electric drill is recommended.
- Professional installation is highly recommended.
Tools Required for Assembly
Electric drill (recommended)
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | Long, slender metal bar with multiple attachment points/holes. | X 1 |
| A1 | Similar to part A, a long metal bar with attachment points/holes. | X 1 |
| B | Tall, vertical metal post. | X 2 |
| C | Small, L-shaped metal bracket. | X 2 |
| D | Short, straight metal rod. | X 1 |
| E | Short, straight metal rod with specific end fittings. | X 3 |
| F | Small, flat metal connector piece. | X 1 |
| G | Screw/Bolt. | X 48 |
| H | Long, slender metal slat. | X 1 |
| I | Long, slender metal slat. | X 10 |
| J | Short, straight metal rod. | X 1 |
| J1 | Long, slender metal rod. | X 1 |
| K | Long, slender metal bar. | X 1 |
| L | Short, straight metal rod. | X 2 |
| M | Metal bracket with multiple holes. | X 1 |
| N | Metal bracket with multiple holes. | X 1 |
| O | Long, slender metal bar. | X 2 |
| P | Short, straight metal rod. | X 2 |
Assembly Steps
Step 1
Attach two vertical posts (B) to the base. Connect horizontal rods (E, J, J1) and bracket (A1) to the posts (B) using screws (G).
Visual Description: Diagrams show how parts E, J, J1, and A1 align with holes on posts B and are secured with screws G. Close-up views show screw insertion.
⚠️ Note: Further tighten the screw using a drill.
Step 2
Attach two horizontal rods (E) and bracket (N) to the vertical posts (B) using screws (G).
Visual Description: Diagrams show parts E and N connecting to posts B. Close-up views show screw insertion.
⚠️ Note: Further tighten the screw using a drill.
Step 3
Attach part J1 to the vertical posts (B) using screws (G). Part F is a connector, likely used with J1.
Visual Description: Diagrams show J1 and F connecting to posts B. Close-up views show screw insertion.
⚠️ Note: Further tighten the screw using a drill.
Step 4
Attach L-shaped brackets (C) to the long horizontal frame pieces (A and A1) using screws (G).
Visual Description: Diagrams show brackets C being screwed onto frame pieces A and A1. Close-up views show screw insertion.
⚠️ Note: Further tighten the screw using a drill.
Step 5
Attach short rods (L) to the long horizontal frame piece (K) using screws (G).
Visual Description: Diagrams show rods L being screwed onto frame piece K. Close-up views show screw insertion.
⚠️ Note: Further tighten the screw using a drill.
Step 6
Assemble the main bed frame by connecting various horizontal and vertical components using brackets and screws. This step integrates parts from previous steps and adds new ones like M.
Visual Description: A complex diagram showing how parts M, D, C, E, J, A, A1, K, L, J1, N, and G come together to form the primary structure of the bed frame. Multiple close-up views illustrate screw insertion points.
⚠️ Note: Further tighten the screw using a drill.
Step 7
General step showing screws (G) being used to secure various connections within the frame.
Visual Description: Close-up views of screws G being tightened into pre-drilled holes at different connection points.
⚠️ Note: Further tighten the screw using a drill.
Step 8
Attach short rods (P) to the long horizontal bars (O) using screws (G).
Visual Description: Diagrams show rods P being screwed onto bars O. Close-up views show screw insertion.
⚠️ Note: Further tighten the screw using a drill.
Step 9
Attach the long slats (I) to the horizontal frame pieces (H) using screws (G).
Visual Description: Diagrams show slats I being screwed onto frame pieces H. Close-up views show screw insertion.
Step 10
H-type steel slats can be installed into any side groove and provide solid support for the bed frame.
Visual Description: A diagram of the assembled bed frame, highlighting the H-type slats and their placement within the frame structure.
Step 11
Installation Completed
Visual Description: A diagram showing the fully assembled YITAHOME Metal Four Poster Canopy Bed Frame.
Contact Us
If you have any questions about the installation of products, please contact YITAHOME:
Phone: +1 (888) 717-8084 (Mon-Fri 8:00 AM-4:30 PM PST / Sat. 8:00 AM-12:00 PM PST)
Email: after-sale.cs@hotmail.com
Alternative method for Amazon.com orders:
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
