YITAHOME XMJH-V 1 Bed Frame Assembly Manual

Important Information & Safety

⚠️ Two or more people are required for assembly.

To avoid squeaking, please tighten the bolts all the way. Using an electric drill is recommended.

Professional installation is highly recommended.

Parts List

Assembly Instructions

Step 1: Prepare Side Rails and Support Panels

Attach C1 and C2 panels to A and B side rails using S screws. Do not fully tighten the screws yet.

Diagram Description: Illustration shows side rails (A, B) and support panels (C1, C2) being joined with S screws.

Step 2: Attach Footboard Brackets

Install J brackets to the C1 and C2 panels using S screws. Do not fully tighten.

Diagram Description: Illustration shows J brackets being attached to the C1 and C2 panels with S screws.

Step 3: Attach Bed Legs

Install M bed legs to the B side rail using O bolts and S screws. Do not fully tighten.

Diagram Description: Illustration shows M bed legs being attached to the B side rail using O bolts and S screws.

Step 4: Tighten Frame Screws

Fully tighten all screws installed in Steps 1, 2, and 3.

Diagram Description: Illustration shows arrows indicating that all previously installed screws on the bed frame structure (A, B, C1, C2) should now be fully tightened.

Step 5: Install Frame Bolts

Insert R bolts into the designated holes on the A and B side rails.

Diagram Description: Illustration shows R bolts being inserted into the side rails (A, B) of the bed frame.

Step 6: Assemble Headboard Brackets

Pay special attention to positions marked by ⚠️. Attach H and K brackets to the E headboard panels using Q screws.

Diagram Description: Illustration shows H and K brackets being attached to E headboard panels with Q screws.

Step 7: Connect Headboard Panels

Attach the I panel connector to the assembled headboard structure using P and Q screws.

Diagram Description: Illustration shows the I panel connector being attached to the assembled headboard structure using P and Q screws.

Step 8: Attach Slat Support Rails

Attach F1 and F2 slat support rails to the A and B side rails using P screws.

Diagram Description: Illustration shows F1 and F2 slat support rails being attached to the side rails (A, B) with P screws.

Step 9: Assemble Center Support

Attach D1 and D2 center support legs to the G center support beam using N and S screws.

Diagram Description: Illustration shows D1 and D2 center support legs being attached to the G center support beam with N and S screws.

Step 10: Install Center Support

Attach the assembled center support structure (G, D1, D2) to the bed frame using N and S screws.

Diagram Description: Illustration shows the assembled center support structure being attached to the bed frame with N and S screws.

Step 11: Attach Headboard

Attach the assembled headboard structure to the bed frame using P screws.

Diagram Description: Illustration shows the assembled headboard structure being attached to the bed frame with P screws.

Step 12: Attach Footboard Assembly

Attach the footboard assembly, likely involving D2 and connection points on the side rails, secured with N and S screws.

Diagram Description: Illustration shows the footboard assembly being attached to the bed frame, secured with N and S screws.

Step 13: Final Assembly Check

Complete the assembly by securing any remaining components. Ensure all screws and bolts are fully tightened.

Diagram Description: Illustration shows the fully assembled bed frame.

Installation Complete

Installation Completed

Installation abgeschlossen

Installation complétée

Installazione completata

Instalación completada

Contact Information

If you have any questions about the installation of products, please contact YITAHOME:

Phone: +1 (888) 717-8084 (Mon-Fri 8:00 AM-4:30 PM PST / Sat. 8:00 AM-12:00 PM PST)

Email: after-sale.cs@hotmail.com

Alternative method for Amazon.com orders:

1. Log into your Amazon account.
2. Go to "Your Orders" and find the purchase.
3. Click on "Contact Seller".