Playmobil 9372 Police Station and Car

Police Station Assembly

Step 1

Assemble the base structure by attaching a vertical support piece to the main base plate.

Step 2

Attach the window frame assembly to the vertical support.

Step 3

Insert the door frame into the window assembly and secure it with small fasteners.

Step 4

Attach the police sign panel and interior details to the structure.

Step 5

Assemble the helipad platform by attaching railings and landing markers.

Step 6

Attach the helipad platform to the main building structure.

Step 7

Attach the main wall sections and exterior lights.

Step 8

Connect the upper wall sections with window details.

Step 9

Attach the roof structure and antennas.

Police Car Assembly

Step 1 (Car Body)

Attach the four wheels to the police car body.

Step 2 (Car Body)

Attach the roof section and the rear hatch to the car body.

Step 3 (Lights & Sound Unit)

Install the battery (1x Micro 1.5V R03 LR03 AAA) into the light/sound unit. The unit can be switched ON/OFF to activate lights and sounds.

Step 1 (RC Car Assembly)

Prepare the RC car components: car body, RC module, and wheels.

Step 2 (RC Car Assembly)

Attach the RC module to the car chassis.

Step 3 (RC Car Assembly)

Install batteries (4x Mignon 1.5V R6 LR6 AA) into the RC module.

Step 4 (RC Car Assembly)

Connect the wiring from the RC module to the car's components.

Step 5 (RC Car Assembly)

Attach the four wheels to the RC chassis.

Step 6 (RC Car Assembly)

Connect the assembled RC chassis to the car body.

Step 7 (RC Car Assembly)

Attach the roof light bar to the car.

Important Safety Information

⚠ Epilepsy Warning: This toy produces light flashes that may trigger epilepsy in sensitive individuals.

Battery Safety Guidelines:

• Only use the specified battery types.
• Non-rechargeable batteries are not to be charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before they are recharged.
• Do not use different battery types or new and used batteries together.
• Batteries must be inserted with the correct polarity.
• Empty batteries are to be removed from the toy.
• The connecting terminals are not to be short-circuited.
• Inspect batteries regularly for signs of leakage.
• Do not dispose of used batteries in household waste; hand them in at designated collection points or special waste sites.

Environmental Protection and Compliance

Please help protect the environment. Your appliance contains valuable materials that can be recovered or recycled. Please return it to a designated collection point or an authorized service center.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 (B)/NMB-3(B)

For more information, visit www.playmobil.com.

For RC module information, visit www.rc-modul.playmobil.com.