Important Information
WARNING: CHOKING HAZARD Small parts. Not for children under 3 years. ⚠️ ??
Keep important documents carefully. Addresses for Customer Service Departments are shown in all Playmobil catalogues.
Assembly Steps
Step 1: Building the Main Structure
This step involves assembling the primary wall sections and posts. You will need the following parts:
- Part 30 08 4170: A small brown frame.
- Part 30 08 4000: A light grey wall piece with a window cutout and an irregular opening.
- Part 30 08 4050: A brown vertical post.
- Part 30 08 3970: A light grey wall section with a window cutout.
- Part 30 08 3990: A green wall section with a window cutout.
- Part 30 08 4140: A brown door.
- Part 30 08 4060: A green shutter.
Connect the brown posts (30 08 4050) to the sides of the light grey wall piece (30 08 4000). Attach the small brown frame (30 08 4170) to the top of the wall. The image shows these components forming the initial structure.
Step 2: Adding Window Grates
This step involves adding protective grates to the windows.
- Part 30 08 4950: A black frame with vertical bars.
- Part 30 61 0240: Two black frames with horizontal bars.
Attach the black frame with vertical bars (30 08 4950) to the window opening on the light grey wall section. Then, attach the two black frames with horizontal bars (30 61 0240) to the openings on the green wall section. The diagram shows these parts fitting into the previously assembled wall sections.
Step 3: Installing Doors and Shutters
This step focuses on adding doors and shutters to the wall sections.
- Part 30 08 4030: A green wall section with a window opening and a shutter.
- Part 30 08 4150: A brown door.
- Part 30 08 4160: A light brown shutter.
- Part 30 08 4330: A green wall section with a window opening and a shutter.
- Part 30 08 4120: A brown door.
- Part 30 08 4130: A light brown shutter.
Insert the brown door (30 08 4150) into the opening of the green wall section (30 08 4030) and attach the light brown shutter (30 08 4160) to its window. Similarly, insert the brown door (30 08 4120) into the opening of the green wall section (30 08 4330) and attach the light brown shutter (30 08 4130) to its window. The visual shows these parts being fitted into the wall components.
Step 4: Adding a Fence Section
This step involves adding a fence section to the structure.
- Part 30 08 4040: A green fence panel.
- Part 30 08 4050: Two brown vertical posts.
Attach the two brown vertical posts (30 08 4050) to the ends of the green fence panel (30 08 4040). The diagram shows this fence section ready to be connected to the main building.
Step 5: Attaching to the Base
This step connects the assembled building to its base.
- Part 30 08 3940: A light brown base piece with a slatted surface.
Place the assembled wall sections and fence onto the light brown base (30 08 3940). The visual shows the main building structure being lowered onto the base, aligning connection points.
Step 6: Adding Posts and Railings
This step adds exterior details like posts and railings.
- Part 30 08 4100: Two brown railing pieces.
- Part 30 08 4110: Two brown vertical posts.
- Part 30 08 4320: A small black circular piece.
Attach the brown vertical posts (30 08 4110) to the sides of the building. Connect the brown railing pieces (30 08 4100) to these posts. The small black circular piece (30 08 4320) is shown being attached to the top of the building structure.
Step 7: Adding Sheriff's Sign and Wanted Posters
This step adds the iconic Sheriff's sign and "Wanted" posters.
- Part 30 64 7170: A green Sheriff's sign with "SHERIFF" and a star.
- Part 30 08 3960: A base piece for the sign.
- Part 30 64 7180: A "WANTED" poster for "Bank of Reward $6,000".
- Part 30 64 7190: A "WANTED" poster for "Reward $3,000".
Attach the Sheriff's sign (30 64 7170) to its base (30 08 3960) and then mount it on the roof of the building. Place the "WANTED" posters (30 64 7180 and 30 64 7190) on the exterior walls of the building. The visual shows these elements being added to complete the facade.
Step 8: Completing the Fencing
This step adds the final fence sections.
- Part 30 08 4020: A brown fence panel.
- Part 30 08 4010: A brown fence panel.
- Part 30 08 3950: A brown fence panel.
Connect the brown fence panels (30 08 4020, 30 08 4010, 30 08 3950) to the existing structure to complete the perimeter fencing. The diagram shows these panels being attached to the sides and back of the building.
