Trust YUKI Multi-Device Wireless Mouse User Guide
Product Code: 25515
Introduction
This user guide provides essential information for setting up and using your Trust YUKI multi-device wireless mouse. The YUKI mouse offers flexibility by allowing connection to multiple devices through both RF wireless (via USB receiver) and Bluetooth® technologies.
Package Contents
Your Trust YUKI mouse package includes the wireless mouse and a USB receiver.
Step 1: Battery Installation
To power your mouse, follow these steps:
- Locate the battery compartment on the underside of the mouse.
- Open the compartment cover.
- Insert one 1.5V AA battery, ensuring correct polarity (+/-).
- Securely close the battery compartment cover.
Diagram illustrates inserting a 1x AA battery into the mouse's battery compartment.
Step 2: Powering On and Off
The mouse is equipped with a power switch on its underside:
- Slide the switch to the 'OFF' position to conserve battery.
- Slide the switch to the 'ON' position to activate the mouse.
Diagram shows the power switch with clearly marked 'OFF' and 'ON' positions.
Step 3: Connecting Your Mouse
The YUKI mouse supports two primary connection methods:
3.1 RF Wireless Connection (USB Receiver)
- Find the USB receiver. It may be stored within the mouse or provided separately.
- Plug the USB receiver into an available USB-A port on your computer or device.
- Ensure the mouse is switched ON. The mouse should automatically detect and connect to the computer via the receiver.
Diagram shows a USB receiver being plugged into a USB-A port, followed by the mouse connecting.
3.2 Bluetooth® Connection
- Turn the mouse ON using the power switch.
- Press and hold the Bluetooth pairing button (typically located on the mouse's underside) for approximately 5 seconds. The LED indicator will begin flashing blue, signaling it is ready for pairing.
- On your computer or device, navigate to Bluetooth settings.
- Initiate a search for new devices and select "Trust YVI+" (or a similar identifier) from the list of available devices.
- Once the pairing process is complete, the LED indicator will change to a solid blue, confirming a successful connection.
Diagram shows a user pressing a button for 5 seconds, an LED flashing blue, and a successful Bluetooth connection being established.
Step 4: Switching Between Devices
The YUKI mouse is designed for multi-device use. To switch between previously paired devices, locate and press the dedicated device switching button, usually found on the mouse's base. This action cycles through the connected devices.
Diagram indicates a button used for switching between multiple connected devices.
LED Indicator Status
The LED indicator on the mouse provides visual feedback on its status:
- Flashing Blue: The mouse is in Bluetooth pairing mode.
- Solid Blue: A Bluetooth connection has been successfully established.
Support and Resources
For answers to common questions and further assistance, please visit the Trust support page:
A link to the FAQ section on the Trust website is provided.
