Ubiquiti POE-48-24W-G Power Injector

Safety Notices

Please read, follow, and keep these instructions. Heed all warnings and use only manufacturer-specified attachments/accessories.

• WARNING: Insufficient ventilation can cause fire hazards. Ensure at least 20 mm of clearance around ventilation holes for adequate airflow.
• WARNING: To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.
• WARNING: Do not use this product in locations that can be submerged by water.
• WARNING: Avoid using this product during electrical storms, as there is a remote risk of electric shock from lightning.

Electrical Safety Information

Compliance with voltage, frequency, and current requirements indicated on the manufacturer's label is mandatory. Connecting to a different power source than specified may lead to improper operation, equipment damage, or fire hazards if limitations are not followed.

• This equipment contains no operator-serviceable parts. Service should only be provided by a qualified service technician.
• The equipment is supplied with a detachable power cord featuring an integral safety ground wire for connection to a grounded safety outlet.
• Do not substitute the power cord with a non-approved type. Never use an adapter plug to connect to a 2-wire outlet, as this will defeat the grounding wire's continuity.
• The equipment requires the use of the ground wire as part of its safety certification. Modification or misuse can create a shock hazard resulting in serious injury or death.
• Contact a qualified electrician or the manufacturer if you have installation questions before connecting the equipment.
• Protective earthing is provided by the listed AC adapter. Building installations must provide appropriate short-circuit backup protection.
• Protective bonding must be installed in accordance with local national wiring rules and regulations.

Declaration of Conformity

Hereby, UBIQUITI declares that this device, POE-48-24W-G, is in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU and 2014/35/EU.

The full text of the EU declaration of conformity and detailed compliance information is available at: ui.com/compliance

Manufacturer: Ubiquiti International Holding B.V., Ekkersrijt 3102, Son, Netherlands

UK Declaration of Conformity: This device complies with UK Regulations, Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.

UK Contact: Ubiquiti Distribution UK Limited, Hill House, 1 Little New Street Square, London, United Kingdom EC4A 3TR