Anker SoundBuds Mono BT
Model No.: A3701
Product Overview
This document provides the user manual and EU Declaration of Conformity for the Anker SoundBuds Mono BT wireless Bluetooth headset.
Getting Started: Powering On and Off
To turn the earbuds on and off, press and hold the power button for 3 seconds.
- The earbuds are turned on when the blue LED light turns on (blue LED light duration: 1 second).
- The earbuds are turned off when the red LED light turns on (red LED light duration: 1 second).
Diagram Description: An illustration shows the Anker SoundBuds Mono BT earbud, highlighting the ear hook, main body, power button, volume controls, and charging port.
Charging
To extend battery life, charge the SoundBuds Mono fully at least once every 45 days.
- If the red light is blinking, your charge is low.
- The red LED light stays solid while charging.
- The earbuds are fully charged when the blue LED light turns on.
Diagram Description: An image depicts the earbud connected via a USB cable to a power source for charging.
Pairing with Your Device
When the earbuds are off, press and hold the power button for more than 4 seconds to disable the current connection and automatically enter pairing mode.
- If the blue LED indicator flashes rapidly, pairing mode is activated.
- If the blue LED light stays on for 1.5 seconds, pairing has been successful.
Diagram Description: An illustration shows the earbud with a flashing blue light, a smartphone displaying Bluetooth settings, and a visual representation of a wireless connection being established within a 5-meter range.
Operation
The following operations can be performed using the buttons on the earbuds:
- Single press the power button: Play / Pause ▶️ / ⏸️
- Press and hold the volume + button for 1 second: Next track ⏭️
- Press and hold the volume - button for 1 second: Previous track ⏮️
- Press +/- buttons once: Volume Up / Down
- Press MFB button for 1 second: Active (e.g., activate voice assistant)
Diagram Description: A diagram illustrates the earbud with icons representing functions: a circle for play/pause, musical notes for track selection, a microphone for voice input, and +/- for volume.
EU Declaration of Conformity
We, hereby declare that the essential requirements set out in the RED Directive 2014/53/EU, have been fully fulfilled on our product with indication as below:
Product Name: SoundBuds Mono BT
Brand Name / Model: Anker/A3701
The following standards have been applied for the investigation of compliance:
- Safety: EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 ✔️
- Safety (Adaptor)
- Health: EN 62479: 2010 ✔️
- EMC: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0 ✔️
- Radio: EN 300 328 V2.2.0 ✔️
Furthermore, the ISO requirement for the in-process quality control procedure as well as the manufacturing process has been reached. The technical document as well as the test reports will be kept for a period at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection.
Detail contact information for this declaration has been listed below as the window of any issues relevant for this declaration.
Manufacturer Information:
Company: Anker Innovations Limited
Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Name/Title: Beli zhang/manger
E-mail: Beli.zhang@oceanwing.com
Tel. No.: +86 755 22674278
Signature / stamp: [signature]
Date: 2018-03-03