Power Technologies AC-30 30 Bay Configurable Charging Cart User Manual
Product Information
The Power Technologies AC-30 is designed to charge, store, and transport up to 30 Chromebooks, laptops, or tablets up to 14 inches.
Specifications
Model | AC-30 |
---|---|
Cart Dimensions | 34.7" (H) x 25.8" (W) x 19.7" (D) 881 mm (H) x 655 mm (W) x 500 mm (D) |
Shelf Dimensions | 14.5" (D) x 11.5" (H) & Divider Spacing: 1" 368 mm (D) x 292 mm (H) & Divider Spacing: 25 mm |
Product Weight (Without Devices) | 98 lbs (44.45 kg) |
Shipping Weight | 117 lbs (53 kg) |
Capacity | 30 bays (2 shelves, 15 bays/shelf) |
Supported Devices | Devices up to 14 inch (356 mm) |
Power Specifications (For carts sold within North America) | AC IN/ Power Strip: 110V AC, 50/60Hz, 10A Maximum power: 1400W |
Power Specifications (For carts sold outside North America) | AC IN/ Power Strip: 100-240V AC, 50/60Hz, 10A Maximum power: 2400W |
Charging Type | * Basic Charging* (Cycle Charging for international models) |
Security | Front & Back door 3 point mechanism with lockable |
Casters | Four 4 inch (102 mm) Swivel / Lock Casters |
Work Platform Loading | 55.1 lbs (25 kg) |
Shelf Loading (ea.) | 110.2 lbs (50 kg) |
Adapter Shelves Loading (ea.) | 6.6 lbs (3 kg) |
Working Temperature | 0° - 30°C |
Working RH% | 10% - 90% |
Storage Temperature | -40° - 60°C Temp |
Storage RH% | 5% - 95% |
Warranty | Lifetime Frame, 2 Years Components, 2 Years Electronics |
Specifications subject to change without notice.
Models and Part Numbers
This manual covers the following models and part numbers. The manual is based upon the North American 110V product offering. Refer to the part numbers below and cord end diagrams for your specific region.
MODEL# | SKU | DESCRIPTION |
---|---|---|
AC-30 | AC-30 | AC-30, 30 Bay Low Cost Basic Charging Cart - 110V NA (Legacy Number) |
AC-30 | CRT-LTE-B30L-D | AC-30, 30 Bay Low Cost Basic Charging Cart - 110V NA |
AC-30 | CRT-LTE-B30L-E | AC-30, 30 Bay Low Cost Basic Charging Cart - 220V EU |
AC-30 | CRT-LTE-B30L-U | AC-30, 30 Bay Low Cost Basic Charging Cart - 220V UK |
AC-30 | CRT-LTE-B30L-A | AC-30, 30 Bay Low Cost Basic Charging Cart - 220V AU |
AC-30 | CRT-LTE-B30L-S | AC-30, 30 Bay Low Cost Basic Charging Cart - 220V SW |
Power Cords and Sockets for Specific Region
- US / Canada: Features a Type B socket.
- United Kingdom: Features a Type G socket.
- European: Features a Type C/F socket.
- Australian: Features a Type I socket.
- Switzerland Type-J: Features a Type J socket.
Cart Features (Front View)
The AC-30 cart features a keyed door lock latch, a push handle (installation required), and four 4-inch swivel/lock casters for mobility.
The cart is designed with removable dividers to accommodate devices of varying thicknesses. Each shelf has numbered divider retaining strips. External power sockets are available on both the left and right sides of the cart. Power cords can be routed from both the left and right sides.
Cart Features (Rear View)
The rear of the cart provides AC adapter holders (baskets) for storing device accessories, power adapters, and managing power cables. It also includes power outlet strips on both the left and right sides and device cord pass-thru holes.
Installation Instructions
Installing the Handle
- Locate the cardboard box containing the handle rod, handle bolts, mounting brackets, and hex wrenches.
- On the top of the cart, find the threaded holes for the handle.
- Using the larger hex wrench, attach and tighten the left and right side handle mounting brackets to the top of the cart using 4 large bolts.
- Fit the handle rod between the brackets and tighten using the smaller hex wrench and handle bolts.
Setting Up Devices (Front)
- Using a ruler, measure the thickness of your device.
- If a device is thicker than 1 inch, locate and remove the thumbscrews on the shelf.
- Remove the retaining strip.
- Pull the divider forward, then lift it up to remove it.
- Adjust the spacing between dividers as needed.
- Place the retaining strip back in position and replace the thumbscrews.
Setting Up Devices (Back)
- Using the supplied key, open the rear door.
- Place device adapters inside the AC Adapter Holders (baskets).
- Use the Device Cord Pass-Thru Holes to feed device cables.
- Plug the device cables into the power outlets.
- Working from the front, weave device cables into the divider tabs.
- Use the supplied Cable Clips to fasten each cable to the divider by pressing down firmly, securing the cable in place.
Power Requirements
THE ELECTRICAL SYSTEM IS DESIGNED TO HANDLE A MAXIMUM OF 15 AMPS.
To evenly distribute the electrical load, consider using 2 separate electrical outlets on different circuits if possible. This manual refers to the Standard (US) Plug, with a single plug for international models.
Power Outlet Locations: C1 (Left Side), C2 (Right Side)
If 2 separate outlets are not available, review power adapter requirements:
NOTE: If wattage exceeds 14 Amps or about 1400 Watts at one time, the charging system may not operate correctly. Review your device's AC Adapter wattage, multiplying it by 30.
- 30 Watts x 30 Devices = 900 Watts
- 45 Watts x 30 Devices = 1350 Watts
- 65 Watts x 30 Devices = 1950 Watts
Casters Positions
Lock or Unlock the Movement of Cart
This cart is equipped with casters that have a "BLACK" color foot pedal. Release the Direction Lock by lifting up on the foot pedal to restore full swivel motion.
With a simple release of the BLACK foot pedal, you can navigate effortlessly with unparalleled flexibility. Engage the BLACK foot pedal to securely lock the wheels, keeping the cart safely in place. ↔️
Safety Instructions
⚠️ CAUTION
THIS IS NOT A TOY. ALWAYS FOLLOW SAFETY INSTRUCTIONS.
? IMPORTANT
THE ELECTRICAL SYSTEM IS DESIGNED TO HANDLE A MAXIMUM OF 1400 WATTS per side. If wattage exceeds 1400W at one time, the charging system may not operate correctly. Remove devices until the total wattage is under 1400W.
- ALWAYS move the cart slowly and be aware of your surroundings.
- ALWAYS latch doors before moving the cart.
- Repairs should always be performed by a qualified electrician.
- Set the power switch to the OFF position before you unplug the unit from the wall, plug the unit into the wall, or plug in devices.
- If external devices are set on top of the cart, remove them before rolling the cart around.
- DO NOT block the ventilation holes used for air circulation.
? DANGER
Don't connect the cart with broken electrical components.
DO NOT touch any part of the electrical system while plugged in. ?
❗ WARNING
DO NOT use an extension cord with this unit. ?
❌ DO NOT Pull the cart using power cord.
❌ DO NOT place liquids on or near the cart.
❌ DO NOT attempt to move downstairs.
❌ DO NOT Roll the cart over the power cord.
❌ DO NOT ride or run with the cart.
❌ DO NOT allow children to move or climb.
? ONLY ADULTS should move the cart.
Warranty Claims
For warranty claims, please have the following information ready, then visit www.powertechnologies.com to create a help ticket.
- Serial Number: ___________________________________________________________
- Charging System Type: ___________________________________________________________
- Date Of Purchase: ___________________________________________________________
- Reseller Name: ___________________________________________________________
- PO Number: ___________________________________________________________
Troubleshooting
TROUBLE | Indication | Possible Cause | How to check | Where to check | Remedy |
---|---|---|---|---|---|
Devices are not charged | No visible indication | Power cord failure |
|
Visual inspection of power cord and power strips. [Image: Power cord connected to a power strip with a reset button] |
Replace the power cord if found faulty. |
Overload Circuit | Charging System not Operating correctly | Wattage exceeds 10 Amps/1400 Watts | Verify maximum load of all devices is under 1400 watts if plugged into the same outlet. | [Image: Diagram showing wattage calculation: 100 Watts x 18 Devices = 1800 Watts] |
Remove Devices and re-plugged in. |
Devices are not charging | Laptop power Input LED not Flashes | Power Cords are not connected into the sockets firmly. |
|
Check the Power Socket C1 & C2 in the below Image. [Image: Cart showing C1 and C2 power outlets] |
If one or more Power cords are damaged or no longer works, replace as needed. |
Plug in both Left and Right side power cords:
[Diagram showing the cart with C1 and C2 power outlets indicated]
Further Information
For further information on this product and others, contact Power Technologies at:
Power Technologies42035 Zevo Dr
Temecula, CA 92590
888.650.4488
support@powertechnologies.com
www.powertechnologies.com
File Info : application/pdf, 14 Pages, 7.61MB
DocumentDocumentReferences
Related Documents
![]() |
Power Technologies AC-SLIM™ 36 Bay Secure Smart Charging Cart User Manual This user manual provides detailed information on the Power Technologies AC-SLIM™ 36 Bay Secure Smart Charging Cart, covering product specifications, installation steps, Intelli-Sense smart charging features, caster operation, safety instructions, and troubleshooting guidance. |
![]() |
Power Technologies AC-COMP-16 16 Bay Charging Cabinet User Manual User manual for the Power Technologies AC-COMP-16, a 16-bay charging cabinet designed to charge and store Chromebooks, laptops, and tablets up to 14 inches. Includes specifications, mounting instructions, setup guide, power requirements, safety information, and troubleshooting tips. |
![]() |
Power Technologies PT-VERT-GLIDE-24 Charging Cart for 24 Devices Discover the Power Technologies PT-VERT-GLIDE-24 charging cart, a secure and mobile solution designed to charge and store up to 24 devices up to 17 inches. Features include full metal construction, 4" swivel casters, and a lifetime frame warranty. |
![]() |
PT-SYNC™ Charging Cart: Sync, Charge, and Transport 36 Devices Discover the PT-SYNC™ Charging Cart by Power Technologies, designed to efficiently sync, charge, and transport up to 36 devices. Features Intelli-Sense Smart USB-C, PD3.0 charging, high data transfer rates, and integrated cable management for a streamlined setup. |
![]() |
Power Technologies PT-VERT-GLIDE-15 Charging Cart for Devices up to 17" The Power Technologies PT-VERT-GLIDE-15 is a secure charging cart designed to charge and store up to 15 devices up to 17 inches. It features full metal construction, swivel lock casters, a 3-point locking door handle, and a lifetime frame warranty. |
![]() |
PT-VITRA-PRO™ 36 Device Smart Charging Cabinet Discover the PT-VITRA-PRO™, a smart charging cabinet designed to securely charge, manage, and transport up to 36 devices. Featuring IoT technology for real-time monitoring, USB-C 65W charging, and robust construction, it's ideal for device-heavy environments. |
![]() |
Power Technologies AC-MINI-16 Secure Charging Cabinet for 16 Devices The Power Technologies AC-MINI-16 is a robust charging cabinet designed to securely store and charge up to 16 Chromebooks, laptops, or tablets, each up to 15.6 inches. Its compact design makes it ideal for various settings, from desks to wall mounting. |
![]() |
Power Technologies AC-MINI 12 Bay Charging Cabinet User Manual and Specifications Comprehensive user manual for the Power Technologies AC-MINI 12-bay charging cabinet, detailing specifications, installation, safety, and troubleshooting for charging laptops, Chromebooks, and tablets. |