InSinkErator Mounting Adapter Selection Guide
InSinkErator offers adaptability with two types of stainless steel collar adapters and a sink flange adapter to fit any sink opening. Customize your disposer and cleanup by choosing from various bowl sink assemblies designed for dish tables or drainboards.
How to Select the Correct InSinkErator Mounting Adapter:
- Disconnect the existing disposer from the sink bowl or cone.
- Identify the diagram that matches your sink bowl or cone shape.
- Measure the A and B dimensions (and C, D, and E if indicated).
- Match the manufacturer and dimensions to find the correct adapter number.
Mounting Adapter Charts:
Section 1: Flange Sink Mount
| Normally Used By | A (Diameter sink/bowl opening) | B (Diameter outside flange) | ISE Ring Adaptor # | Special Information |
|---|---|---|---|---|
| ISE, Waste King, Toledo, National Bus Boy | 4 1/2" | 5 1/8" | 11327A | Discard previous adaptor parts. |
| ISE, Waste King | 6" | 6 7/8" | 11327K | Discard previous adaptor parts (has 3-piece split ring). |
| ISE, Toledo | 6" | 7 3/16" | 11327B | Discard previous adaptor parts. |
| Standard ISE mounting | 6 5/8" | 7 1/8" | 11599E | Discard previous adaptor parts. |
| National, Hobart, Toledo | 7" | 7 3/8" | 11327G | Discard previous adaptor parts. National mounting has ten bolt circle on split ring. |
| Salvajor | 7" | 7 3/4" | 11599A | Discard previous adaptor parts (split ring supplied). |
| ISE, Toledo | 8" | 9 1/4" | 11327 | Discard previous adaptor parts (split ring supplied). |
Section 2: Sink Mount with Bolt Holes
| Normally Used By | A (Diameter sink/bowl opening) | B (Diameter outside flange) | E (Diameter bolt hole circle) | No. of Bolt Holes | ISE Ring Adaptor # | Special Information |
|---|---|---|---|---|---|---|
| Waste King, Red Goat | 4 1/2" | 6 1/2" | 5 1/2" | 6 | 11599 | Discard previous adaptor parts. Use existing bolt holes. |
| American Delphi, Atomic | 6" | 7 1/2" | 6 7/8" | 6 | 11378D | Discard previous adaptor parts. Use existing bolt holes. |
| National, Hobart | 7" | 8 1/2" | 8 1/16" | 10 | 11599B | Discard previous adaptor parts. |
Section 3: Sink Mount with Unattached Ring
| Normally Used By | A (Diameter sink/bowl opening) | B (Diameter outside flange) | ISE Ring Adaptor # | Special Information |
|---|---|---|---|---|
| Waste King | 6" | 6 1/2" | 11327D | Loose ring on sink not used with this adaptor (O.D. of loose ring is 7 1/2" with six bolts - 7" bolt hole circle diameter). |
Section 4: Loose Ring (Re-use)
| Normally Used By | A (Diameter sink/bowl opening) | C (Diameter inside bend) | ISE Ring Adaptor # | Special Information |
|---|---|---|---|---|
| Waste King, Bus Boy | 5 7/8" | 6 1/2" | 11327H | Re-use existing clamping ring. |
| Waste King, Bus Boy | 5 7/8" | 6 7/8" | 11327H |
Section 5: Sink Mount with Bolt Holes (Re-use)
| Normally Used By | A (Diameter sink/bowl opening) | C (Diameter inside bend) | E (Diameter bolt hole circle) | No. of Bolt Holes | ISE Ring Adaptor # | Special Information |
|---|---|---|---|---|---|---|
| Hobart | 4 1/2" | 6 7/8" | 5 1/2" | 6 | 11327H | Discard previous adaptor parts. |
Section 6: Discontinued
This section lists discontinued models and their corresponding measurements.
Section 7: No Flange Mount
| Normally Used By | A (Diameter sink/bowl opening) | D (Diameter) | ISE Ring Adaptor # | Special Information |
|---|---|---|---|---|
| Red Goat, Insinger | 4 1/2" | 1 1/8" | 11378C | 4 3/4" rubber connection sleeve and clamping bands. Support legs required. |
| Waste King | 6" | 1 1/8" | 11378A | 6 1/4" rubber connection sleeve and clamping bands. Support legs required. |
| Red Goat, Insinger | 7" | 1 1/8" | 11378B | 7 1/4" rubber connection sleeve and clamping bands. Support legs required. |
| Master | 8" | 1" | 11599K | 8 1/4" rubber connection sleeve and clamping bands. Support legs required. |
Section 8: Raised Bead
| Normally Used By | A (Diameter sink/bowl opening) | D (Diameter) | ISE Ring Adaptor # | Special Information |
|---|---|---|---|---|
| Salvajor | 4 7/16" | 1" | 11599N | |
| Salvajor | 6 5/8" | 1" | 11599H | Has raised bead on outside of sink throat. Support legs required. |
InSinkErator Commercial Disposer Sizing Chart
Trusted by foodservice consultants and equipment dealers, InSinkErator offers a disposer for every need, serving 25 to 2,500 people. The LC-50 model is suitable for light-duty commercial applications like coffee shops, convenience stores, or quick-service restaurants. For specific applications or questions, consult your Foodservice Consultant or InSinkErator.
Sizing Recommendations by Volume Processed and Food Waste Composition:
| Volume Processed | Light (Majority Fruits & Vegetables) | Medium (50/50 Mixture) | Heavy (Majority Meats & Seafood) |
|---|---|---|---|
| High (Buffet/Cafeteria, Government) | SS-300, SS-300/500, SS-500, SS-500/1000, SS-500/1000 (2,500 MEALS) | SS-300, SS-300/500, SS-500, SS-500/1000 | SS-500, SS-500/1000 |
| Medium (Full Service Restaurant) | SS-200, SS-300, SS-300/500, SS-500, SS-500/1000 | SS-300, SS-300/500, SS-500, SS-500/1000 | SS-500, SS-500/1000 |
| Low (Limited Service Restaurant/Café/Fast Casual) | SS-100, SS-200, SS-300, SS-300/500, SS-500 (100 MEALS) | SS-100, SS-200, SS-300, SS-300/500 | SS-200, SS-300, SS-300/500 |
Five Stainless Steel Models from 1 HP to 10 HP in three sizes:
Small Capacity (1 HP)
Features include:
- 1 Phase, 1/2 - 14 N.P.T. Water Inlet
- External Electrical Connections
- 3" N.P.T. Waste Outlet
- Dimensions: 17" (431.8 mm) height, 6 5/8" diameter
Medium Capacity (2 HP)
Features include:
- 3 Phase, 1/2 - 14 N.P.T. Water Inlet
- External Electrical Connections
- 3" N.P.T. Waste Outlet
- Dimensions: 18.25" (463.55 mm) height, 7 3/8" diameter
Large Capacity (3, 5, & 10 HP)
Features include:
- 3 Phase, 1/2 - 14 N.P.T. Water Inlet
- External Electrical Connections
- 2" N.P.T. Waste Outlet
- Dimensions: 23 3/4" (603.25 mm) height, 8 3/4" diameter
InSinkErator provides food waste disposers, reduction systems, hot water dispensers, and water-saving systems, offering commercial equipment solutions for foodservice operations.
Contact Information:
InSinkErator
1250 International Drive, Mount Pleasant, WI 53177
T: 800-845-8345
www.insinkerator.com/foodservice
InSinkErator® may make improvements and/or changes to specifications at any time, at its sole discretion, without notice or obligation and reserves the right to change or discontinue models.
©2023 InSinkErator. All rights reserved.
FoodService Equipment (Commercial) | InSinkErator US
