Sony STR-DH590 AV Receiver: Setup, Operation, and Specifications
Introduction
Please read this manual carefully before operating your unit and retain for future reference.
Safety Information
Warnings
⚠️ WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
⚠️ WARNING: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
⚠️ WARNING: To reduce the risk of fire or electric shock, do not install this apparatus in a confined space such as a bookcase or built-in cabinet.
⚠️ WARNING: Ensure the AC power cord is plugged into a readily accessible outlet.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- CAUTION: This symbol indicates that there may be a risk of electric shock.
- CAUTION: This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this appliance.
For the customers in the USA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For the customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
For the customers in Europe
This product is intended for use in Australia, New Zealand, and Europe.
Disposal of Old Electrical and Electronic Equipment
The symbol on this product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Supplied Items
- Remote Control (1)
- R03/AAA size batteries (2)
- FM Antenna (1)
- Instruction Manual (1)
Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary depending on the model.
Remote Control
Power
Press to turn the unit on or set it to standby.
Power Indicator
Lights up when the unit is turned on. Lights up in red when the unit is in standby mode.
Input Selector
Press to select the input source. The indicator for the selected input lights up.
Display
Press to turn the display off or on.
Remote Control Diagram Description
Diagram of the remote control: Includes Power button, Input Select buttons (HDMI 1, HDMI 2, TV/AUDIO, AUDIO, BD/DVD, SAT/CBL, GAME), Multi-function buttons (e.g., RETURN, MENU, OPTIONS, AMP MENU, DISPLAY), Volume controls (+/-), Channel/Track buttons, Playback controls (▶️, ⏸️, ⏹️), Bluetooth button, Sound Mode buttons (e.g., PURE DIRECT, STEREO, MOVIE, MUSIC), and Navigation buttons (▲/▼/◀️/▶️, ENTER).
Remote Control Buttons
- HDMI 1/2, TV/AUDIO, AUDIO, BD/DVD, SAT/CBL, GAME: Selects the input source.
- RETURN: Returns to the previous menu or screen.
- MENU: Displays the setup menu.
- OPTIONS: Displays context-sensitive options.
- AMP MENU: Displays the receiver's setup menu.
- DISPLAY: Toggles the display information on the receiver.
- VOL +/-, CH +/-, TRACK +/-, ▶️, ⏸️, ⏹️: Controls volume, channel/track selection, play, pause, and stop.
- BLUETOOTH: Activates Bluetooth function.
- PURE DIRECT: Turns off video circuits and dimmer for pure audio playback.
- STEREO, MOVIE, MUSIC: Selects sound modes.
- ▲/▼/◀️/▶️, ENTER: Navigation buttons for menus.
Bluetooth Remote Control
When the Bluetooth function is activated, you can enjoy music from your Bluetooth device. The Bluetooth indicator on the receiver lights up when connected.
Front Panel Controls
Power
Press to turn the unit on or set it to standby.
Power Indicator
Lights up when the unit is turned on. Lights up in red when the unit is in standby mode.
Input Selector
Turn to select the input source. Press to confirm selection.
Volume
Turn to adjust the volume. Press to mute/unmute.
USB Port
Connect USB storage devices for playback.
HDMI IN
Connect HDMI devices.
Headphones
Connect headphones for private listening.
Front Panel Diagram Description
Diagram of the front panel: Features a Power button, Input Selector dial, Volume dial, USB port, HDMI IN port, Headphones jack, and indicator lights (e.g., POWER, STANDBY, INPUT, BLUETOOTH).
Indicators
Input Indicator
Lights up to show the currently selected input source (e.g., HDMI 1, HDMI 2, TV/AUDIO).
Bluetooth Indicator
Lights up when a Bluetooth device is connected.
Sleep Indicator
Lights up when the sleep timer is set.
Pure Direct Indicator
Lights up when Pure Direct mode is activated.
Connections
Connecting the FM Antenna
Connect the supplied FM antenna to the FM ANTENNA jack on the rear panel. Position the antenna for optimal reception.
Connecting Audio/Video Devices
Connect your TV, Blu-ray player, game console, and other devices using HDMI, Optical, or Coaxial cables.
Rear Panel Connection Diagram Description
Diagram illustrating rear panel connections: Shows ports for HDMI IN (1, 2), HDMI OUT (ARC), OPTICAL IN, COAXIAL IN, FM ANTENNA, and AC IN power connector. Also shows speaker terminals for Front L/R, Center, Surround L/R.
Power Connection
Connect the AC power cord to the AC IN jack on the rear panel and plug it into a wall outlet.
Speaker Connections
Connect speakers to the Front L/R, Center, and Surround L/R terminals on the rear panel using appropriate speaker wire.
Initial Setup
Turning on the Receiver and Setting the Easy Setup
1. Connect the receiver to your TV using an HDMI cable. Ensure the TV is set to the correct HDMI input.
2. Connect the receiver to power and turn it on.
3. The receiver will display an "Easy Setup" menu on your TV screen.
4. Follow the on-screen prompts to select your language, set up speaker configuration (including calibration), and configure network settings if applicable.
Easy Setup Screen Description
Textual representation of the Easy Setup screen on a connected TV: Displays prompts for language selection, speaker calibration, and network setup. Users navigate using the remote control's arrow keys and ENTER button.
Speaker Calibration
The Easy Setup process includes an automatic speaker calibration function (using a connected microphone, not supplied) to optimize sound output based on your room acoustics.
Operation
Playing Back Sound and Visual Devices
1. Turn on your source device (e.g., Blu-ray player, game console).
2. Press the corresponding input button on the remote control (e.g., HDMI 1, BD/DVD) to select the source.
3. Use the playback controls (▶️, ⏸️, ⏹️) on the remote to control playback.
Connecting to a Bluetooth Device
1. Press the BLUETOOTH button on the remote control.
2. On your Bluetooth device (smartphone, tablet), search for available devices and select "STR-DH590".
3. If prompted, enter the pairing code (usually "0000").
4. Once paired, the Bluetooth indicator on the receiver will light up, and you can play audio from your device.
Bluetooth Pairing Diagram Description
Diagram showing the receiver's Bluetooth indicator light and remote control buttons for pairing.
Turning on the Bluetooth function
Press the BLUETOOTH button on the remote control.
To cancel Speaker Calibration
During the Easy Setup, you can cancel speaker calibration by pressing the RETURN button.
Reverting to the factory default settings
To reset the receiver to its original factory settings, navigate to the 'System' menu in the setup screen and select 'Factory Reset'. Confirm the action.
Troubleshooting
General
If the unit is not operating correctly, check the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | AC power cord is not connected. | Connect the AC power cord securely. |
| No sound | Volume is set to minimum or muted. | Turn up the volume or unmute. |
| Incorrect input is selected. | Select the correct input source. | |
| Speakers are not connected properly. | Check speaker connections. | |
| No picture | HDMI cable is not connected properly. | Check HDMI cable connections. |
| Incorrect input is selected on the TV. | Select the correct input on the TV. | |
| Bluetooth device not connecting | Device is not in pairing mode. | Put the Bluetooth device in pairing mode. |
| Receiver is not in pairing mode. | Press the BLUETOOTH button on the remote. |
On the display panel
If the display panel is not working, ensure the unit is not in standby mode and the display is not turned off using the DISPLAY button.
Specifications
| Category | Specification |
|---|---|
| General Power Requirements | AC 120 V, 60 Hz (USA/Canada) / AC 230 V, 50 Hz (Europe) |
| Power Consumption | 165 W (USA/Canada) / 170 W (Europe) |
| Standby Power Consumption | 0.5 W (USA/Canada) / 0.5 W (Europe) |
| Dimensions (W x H x D) | Approx. 430 mm x 133 mm x 297 mm (17 x 5 1/4 x 11 3/4 inches) |
| Weight | Approx. 7.1 kg (15 lb 10 oz) |
| Amplifier Section | |
| Number of Channels | 5.1 channels |
| Power Output (1 kHz, THD 10%, 6 Ω) | 130 W per channel |
| Power Output (20 Hz–20 kHz, THD 0.09%, 8 Ω) | 100 W per channel (Front L/R) |
| Dynamic Power | 165 W (6 Ω) / 135 W (8 Ω) |
| Frequency Response | 10 Hz – 100 kHz, +0.5/-2 dB (Direct mode) |
| Signal-to-Noise Ratio (A-weighted) | 102 dB (2 V input) |
| Supported Bluetooth Profiles | A2DP, AVRCP |
| Supported Bluetooth Codecs | SBC, AAC |
| Bluetooth Version | 4.2 |
| FM Tuner Section | |
| Tuning Range | 87.5 MHz – 108.0 MHz |
| Antenna Input | 75 ohm unbalanced |
| AM Tuner Section | |
| Tuning Range | 530 kHz – 1710 kHz (USA/Canada) / 531 kHz – 1602 kHz (Europe) |
| Antenna | Loop antenna |
Additional Information
On Bluetooth Communication
This unit supports Bluetooth wireless technology. You can stream audio from compatible Bluetooth devices. For optimal performance, ensure a clear line of sight between the unit and the Bluetooth device. The effective range is approximately 10 meters (33 feet).
On Cleaning
Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical wipes.
On Replacement Parts
When replacement parts are required, ensure that the service technician has specified that the replacement part is the one specified by the manufacturer or has the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
