User Guide
YOUR GAME. OUR PLAY!
Brook INSIDE
Before using the product, we recommend visiting the official website to update the firmware to ensure the best possible experience.
Brook INSIDE
© Brook All Rights Reserved. www.brookaccessory.com
Product Diagram and Button Mapping
Diagram:
Top view of the arcade stick showing button layout. Features include Shoulder Strap, Metal Ring, Strap Buckle Frame, Magnetic Leather Case, FN KEY, Type-C Cable, and Type-C Connector.
Buttons are labeled with numbers and symbols (e.g., 1P, 2P, 3P, 4P, 1K, 2K, 3K, 4K, L1, L2, L3, R1, R2, R3, TP, PS, CREATE, OPTIONS, L3, R3).
Button Mapping Table:
| Button | PS5 | PS4 | X-Series | Switch | PC(X-360) | Arcade |
|---|---|---|---|---|---|---|
| Create | PS | PS | Guide | HOME | Guide | XB/PS |
| Options | Create | Share | Share | Capture | Back | SELECT |
| TP Key | Options | Options | Menu | Plus | Start | START |
| ↑ | TP Key | TP Key | View | Minus | - | TP Key |
| ← | ↑ | ↑ | ↑ | ↑ | ↑ | ↑ |
| → | ← | ← | ← | ← | ← | ← |
| ↓ | → | → | → | → | → | → |
| □ | ↓ | ↓ | ↓ | ↓ | ↓ | ↓ |
| △ | □ | □ | X | Y | X | 1P |
| R1 | △ | △ | Y | X | Y | 2P |
| L1 | R1 | R1 | RB | R | RB | 3P |
| X | L1 | L1 | LB | L | LB | 4P |
| ○ | X | X | A | B | A | 1K |
| R2 | ○ | ○ | B | A | B | 2K |
| L2 | R2 | R2 | RT | ZR | RT | 3K |
| R3 | L2 | L2 | LT | ZL | LT | 4K |
| L3 | R3 | R3 | RTSB | RSB | RTSB | R3 |
| FN Key | L3 | L3 | LTSB | LSB | LTSB | L3 |
| FN Key | FN Key | FN Key | FN Key | FN Key | FN Key |
Connection Method
Step 1: Hold down the button corresponding to the console you wish to connect to.
Note: This step will automatically save the selected platform setting. If you use the same platform next time, you can proceed directly to Step 2.
Diagram:
Shows the arcade stick with various buttons highlighted, corresponding to console connections: 1P = PS5, 2P = Xbox Series X/S, 3P = Nintendo Switch, 4P = PC (XID mode), 1K = PS4.
Step 2: Connect the Brook Fighter Starburst to your console or PC using the Type-C cable.
Diagram:
Illustrates connecting the Type-C cable from the arcade stick to a Type-A port on a console/PC.
Step 3: Follow the on-screen instructions to press the specified button and log into the game. (e.g., for PS5, press the PS button to log in).
Diagram:
Shows the arcade stick with the PS button highlighted, indicating the login process.
Recommended Settings for PS5
To enjoy a smoother gaming experience on the PS5, we recommend the following settings:
- Step 1: Go to Settings > Accessories > Controller (General).
- Step 2: Select Communication Method and then select Use USB Cable.
RGB LED Function Setting
- Fn + □ (1P): Switch lighting effects. Effect sequence: All off (default) → Turn on when pressed → Turn on when pressed → Breathing light → Marquee (left to right) → Marquee (right to left).
- Fn + △ (2P): Increase brightness.
- Fn + R1 (3P): Decrease brightness.
Turbo Function Setting
- There are currently five button press frequencies available: 5, 10, 15, 20, and 25 Hits/Sec.
- Hold [Fn + Options], then press ↑ (Up) to increase the frequency; press ↓ (Down) to decrease the frequency.
- Hold [Fn + Options], then press the button you want to set or cancel the turbo function.
- The buttons that can be set for the Turbo function are: □ (1P), △ (2P), R1 (3P), L1 (4P), X (1K), ○ (2K), 3K (R2), 4K (L2), L3, R3.
SOCD Mode Switching Tutorial
SOCD refers to the mode that determines the primary output direction when opposing cardinal directions are input simultaneously.
- Default setting is mode 1.
- SOCD mode settings are automatically saved.
Switch Method:
Please hold down the corresponding button first, then insert the power cable into the console to switch modes.
Diagram:
Shows the arcade stick with different modes indicated (Mode 1, Mode 2, Mode 3, Mode 4). A table illustrates the SOCD modes:
| Direction | Mode 1 (UP Priority) | Mode 2 (CAPCOM/Neutral) | Mode 3 (Last Priority) | Mode 4 (BYPASS) |
|---|---|---|---|---|
| ← + → | Neutral | Neutral | ← | ← + → |
| → + ← | Neutral | Neutral | → | → + ← |
| ↑ + ↓ | ↑ | ↑ | ↑ | ↑ + ↓ |
| ↓ + ↑ | ↑ | ↑ | ↑ | ↓ + ↑ |
Use combination keys to set stick control mode
To set stick control mode:
- Press and hold Options and ↑ (Up) for three seconds.
- Press and hold Options and ← (Left) for three seconds.
- Press and hold Options and → (Right) for three seconds.
Diagrams:
Illustrations show the arcade stick and PS5 controller, highlighting the buttons to press for each mode change.
Touchpad Emulate
To emulate touchpad functions:
- Press the left button while holding the TP Key.
- Press Touch Pad Key.
- Press the right button while holding the TP Key.
Diagrams:
Illustrations show the arcade stick and PS5 controller, demonstrating how to activate touchpad emulation for different functions.
Magnetic Leather Case Instructions
Angle 1:
- Fully unfold the case and lay it flat.
- Fold the case in the opposite direction.
- Refer to the diagram. Fold the bottom of the case backward and align it with the second grid at the product's base. It will magnetically attach automatically once aligned.
- Once magnetically secured, Angle 1 is set.
Angle 2:
- Follow all steps for Angle 1.
- Fold the bottom of the case downward.
- After folding, press down lightly to ensure the position is fixed.
- Once pressed, Angle 2 is set.
Note: Due to the leather's elasticity, slight rebound when pressing is normal.
Lock Function Setting
- Hold down Fn + Share + Option to enable or disable the lock status.
- Once the lock status is enabled, the following keys will no longer function: PS Key, Option, Share.
Brook Gaming
