Uwell Caliburn G3 Pro Koko User Manual
This document provides instructions for the Uwell Caliburn G3 Pro Koko pod system.
Product Overview
The Uwell Caliburn G3 Pro Koko is a pod system designed for vaping. It features a sleek design and user-friendly interface.
Device Components
The device consists of the following main parts:
- Pod Cartridge
- Device Body
- USB-C Charging Port
- Fire Button
- Display Screen
Getting Started
1. Filling the Pod
To fill the pod, remove the mouthpiece and fill the pod with e-liquid through the filling port. Reattach the mouthpiece securely.
2. Installing the Pod
Insert the filled pod into the device body until it clicks into place.
3. Powering On/Off
Press the fire button five times within 2 seconds to turn the device on or off. The display screen will indicate the power status.
Operation
1. Vaping
Press and hold the fire button while inhaling. Release the button to stop vaping.
2. Adjusting Wattage
The device allows for wattage adjustment. Refer to the display screen for current wattage and use the adjustment buttons (if applicable) to change it.
3. Display Information
The display screen shows important information such as battery level, current wattage, puff count, and resistance.
Charging
Connect the device to a power source using the provided USB-C cable. The display screen will show the charging status. It is recommended to fully charge the device before first use.
Safety Precautions
- Keep out of reach of children.
- Do not use if the pod is empty.
- Do not expose to extreme temperatures or direct sunlight.
- Use only the recommended e-liquids.
- Do not attempt to disassemble or repair the device yourself.
- If the device malfunctions, discontinue use and contact customer support.
Troubleshooting
No Vapor: Ensure the pod is properly installed, the battery is charged, and the device is powered on. Check if the e-liquid level is sufficient.
Leaking: Ensure the pod is correctly assembled and the filling port is securely closed. Check for any damage to the pod.
Device Not Charging: Ensure the USB-C cable is properly connected to both the device and the power source. Try a different USB-C cable or power adapter.
Maintenance
Regularly clean the contacts between the pod and the device. Replace the pod cartridge when the flavor diminishes or it shows signs of wear.
Warranty Information
Please refer to the warranty card included with your product for detailed warranty information.
Contact Information
For customer support and inquiries, please visit the Uwell official website or contact authorized Uwell distributors.
