CJ Global Inc. BL2102 Bluetooth Speaker

Introduction

This user manual provides essential information for the setup, operation, and maintenance of the CJ Global Inc. BL2102 Bluetooth speaker. Please read through this document carefully before using the product to ensure optimal performance and safety.

Key Features

• ? Wireless Bluetooth Connectivity: Easily connect your devices for audio streaming.
• ? Portable and Compact Design: Ideal for use at home, in the office, or on the go.
• ? High-Quality Audio Output: Delivers clear and robust sound.
• ? Built-in Rechargeable Battery: Provides extended playback time on a single charge.
• ⚙️ Intuitive Controls: Simple buttons for power, volume, and playback.

Specifications

Getting Started

1. Charge the Speaker: Connect the provided USB cable to the charging port and a power source. The indicator light [indicator light description, e.g., will turn red while charging and blue when fully charged].
2. Power On: Press and hold the power button [power button description, e.g., located on the top panel] until you hear a startup sound.
3. Pair with Device: Enable Bluetooth on your smartphone, tablet, or computer. Search for "BL2102" in the list of available devices and select it to pair. The indicator light will flash [pairing indicator, e.g., blue] during pairing and remain solid when connected.
4. Play Audio: Once paired, you can play music or other audio from your connected device.

Safety Precautions

To ensure safe operation and prevent damage to the product or personal injury, please adhere to the following precautions:

• ⚠️ Environmental Conditions: Do not expose the speaker to extreme temperatures (hot or cold), direct sunlight, or moisture. Avoid using in dusty or humid environments.
• ⚡ Power and Charging: Use only the supplied charging cable and a certified power adapter. Do not attempt to disassemble or replace the battery. Overcharging may damage the battery.
• ?️ Volume Levels: Avoid listening at excessively high volumes for prolonged periods to prevent hearing damage.
• ? Cleaning: Clean the exterior with a soft, dry cloth. Do not use liquids or abrasive cleaners.
• ♻️ Disposal: Dispose of the product and its battery in accordance with local electronic waste regulations.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC ID: [FCC ID Number, if available]

Troubleshooting Guide

Issue: Speaker does not power on.

Possible Cause: Battery is depleted.

Solution: Connect the speaker to a power source using the provided charging cable and allow it to charge for at least [charging time, e.g., 30 minutes] before attempting to power it on again.

Issue: Cannot connect via Bluetooth.

Possible Cause: Speaker is not in pairing mode, or Bluetooth is not enabled on the source device.

Solution: Ensure Bluetooth is enabled on your source device. Turn off the speaker and turn it back on, then press and hold the Bluetooth pairing button [button description] to re-enter pairing mode. Try removing "BL2102" from your device's Bluetooth list and re-pairing.

Issue: No sound or distorted sound.

Possible Cause: Volume too low, incorrect audio source, or speaker malfunction.

Solution: Increase the volume on both the speaker and the source device. Ensure the correct audio source is selected. If the issue persists, try resetting the speaker.

Warranty Information

CJ Global Inc. provides a limited warranty for this product. For detailed terms and conditions, please refer to the separate warranty card included with your purchase or visit the CJ Global Inc. website.