Fast Wireless Charger

Product Overview

This document provides instructions and specifications for the Fast Wireless Charger, model CH2206, by CJ Global Inc. It is designed to charge mobile phones, Apple Watches, and AirPods wirelessly or via a wired connection.

Image: A black, circular wireless charging pad with a separate smaller pad for a watch or earbuds, labeled 'FAST CHARGE'.

Specifications

Diagram: Illustrates the charging setup, including a power adapter, a USB charging cable, and the wireless charger with a Type-C port.

How to Use

1. Ensure the charging board's red light stays on after flashing blue and red three times; the plate is now in standby mode.
2. Place your Qi-enabled device in the center of the charging stand. The LED indicator will change from red to blue when the device is correctly placed and charging, and a charging icon will appear on the device's screen.
3. Place your Apple Watch® on the designated right wireless charger to begin wireless charging.
4. Connect your AirPods® to the lightning plug for wired charging.

Image: Shows an iPhone and Apple Watch placed on a wireless charging pad, with charging indicators visible.

Compatibility

Phones

• Apple: iPhone Xs/MAX, XR/X, 8/8 Plus
• Samsung: Galaxy Note 9/8/7, S9/S9 Plus, S8/S8 Plus, S7/S7 edge, S6 edge plus
• Any Qi protocol compatible phone

Wearables & Headphones

• Watch: Supports Apple Watch iWatch1/iWatch2/iWatch3/iWatch4
• Headphones: Lightning input AirPods

Notes and Warnings

Please pay attention to the following to avoid abnormal charging, high temperatures, intermittent charging, or no charging:

1. Ensure the phone/watch is placed at the center of the charging area.
2. For simultaneous charging of two devices, a QC2.0/3.0 Quick charger adapter (9V/1.67A) is recommended for optimal speed. Using a 5V/2A adapter will result in slower charging.
3. The charging distance is 2-10 mm. Do not use a protective case thicker than 3 mm.
4. The watch has temperature control. Charging will stop automatically if the temperature reaches 40°C. Charging resumes when the temperature returns to normal.
5. Keep metal or magnetic objects at least 6 cm away from the back center of the phone during charging.
6. Charging speed is faster at lower temperatures; charging is faster in winter than in summer.
7. Avoid charging in high-temperature and humid environments to prevent circuit damage.
8. Keep the device out of reach of children to prevent accidental damage.
9. The images in this manual are sketch maps; the final product may vary slightly.

Package Contents

• Wireless charger
• 100cm power cable
• User manual

Note: A power adapter is not included and must be purchased separately if needed.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.