User Manual for OREI models including: EX-500IR HDMI 150m Extender with Loopout, EX-500IR, HDMI 150m Extender with Loopout
HDBaseT HDMI Balun Extender over CAT5e/6 Upto 500 Feet - OREI – OREI.COM
HDMI 150m Extender With Loopout VER 1.0 1 / 10 Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Table of Contents 1. Introduction ............................................................................. 4 2. Features ................................................................................... 4 3. Package Contents.................................................................. 5 4. Specifications.......................................................................... 5 5. Operation Controls and Functions ........................................ 7 6. Connection Diagram ........................................................... 11 2 / 10 Caution The extender need to follow direct interconnection method CAT cable. The extender will go into protection mode automatically and no video out when using cross interconnection method CAT cable. 3 / 10 1. Introduction The HDMI Extender with Loopout can extend HDMI signal over 500 feet/150 meters to an HDMI compatible display via single Cat5e/6 cable. It also supports bi-directional Infrared control signal and RS-232 transmission together with HDMI signal, it can allow you to easily control your DVD player at TV side or control your TV at the DVD player side when using this extender. 2. Features HDMI 1.4, HDCP 1.4 and DVI compliant Video resolutions up to 1080p@60Hz (YUV4:4:4) HDMI High Bit Rate(HBR) audio pass through 150 meters transmission distance over CAT6 cable POC (Power over Cable), either TX or RX is powered by one 24V@1A power supply See the description 1 Bi-directional infrared control signal transmission See the description 2 Bi-directional RS-232 signal transmission See the description 3 3. Package Contents 1 x HDMI Extender Transmitter 1 x HDMI Extender Receiver 1 x Wideband IR Emitter cable 4 / 10 1 x Wideband IR Receiver cable 1 x 24V/1A Power Adaptor 1 x User Manual 4. Specifications Technical HDMI Compliance HDCP Compliance Video Bandwidth Video Resolutions HDMI 1.4 HDCP 1.4 225MHz up to1080P @60Hz YUV4:4:4RGB4:4:4 Color Space RGB, YUV4:4:4, YUV 4:2:2 Color Depth 8-bit HDMI Audio Formats LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby (Pass-through) True HD, DTS-HD Master Audio, Dolby Atmos, DTS:X ESD Protection Connections Human body model -- ±8kV (air-gap discharge) & ±4kV (contact discharge) Transmitter :1x HDMI Type A [19-pin female] Inputs 1x IR INPUT [3.5mm Stereo Mini-jack] 1x RS232 [Phoenix jack] Receiver: 1x HD BaseT In [RJ45] 1x IR INPUT [3.5mm Stereo Mini-jack] 1x RS232 [Phoenix jack] Transmitter : 1x HD BaseT Out [RJ45] Outputs Receiver: 1x HDMI Type A [19-pin female] 1x IR OUTPUT [3.5mm Stereo Mini-jack] 1x HDMI Type A [19-pin female] Mechanical Housing Color Dimensions Weight 1x IR OUTPUT [3.5mm Stereo Mini-jack] Metal Enclosure Black 140mm [W] x 65mm [D] x 18mm [H] 481g 5 / 10 Power Supply Power Consumption Operation Temperature Storage temperature Relative Humidity Input: AC100 - 240V 50/60Hz Output: DC 24V/1A (US/EU standards, CE/FCC/UL certified) 6W 32 - 104°F / 0 - 40°C -4 - 140°F / -20 - 60°C 20 - 90% RH (no condensation) 5. Operation Controls and Functions 5.1 Transmitter Power: System power indicator. DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. HDBaseT Out: Standard HDBaseT output port. Connect HDBaseT receiver with a UTP cable following the standard of direct interconnection method. HDMI In: Connect to HDMI source device such as Blu-ray or PS4 player. HDMI OUT:Connect to HDTV or monitor HDMI input port. IR In: Channel 2 IR Receiver. Connect to an IR receiver cable. 6 / 10 IR Out: Channel 1 IR Transmitter. Connect to an IR emitter cable. RS-232: Phoenix jack provide serial port control from transmitter to receiver. Connection Signal Indicator Lamp Illuminate: The Transmitter and Receiver are in good connections status. Flashing: The Transmitter and Receiver are in poor connections status. Dark: The Transmitter and Receiver are not connected. Data Signal Indicator Lamp Illuminate: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Dark: No HDMI signal. 5.2 Receiver Power: System power indicator. 7 / 10 DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. HDBaseT In: Standard HDBaseT input port. Connect HDBaseT Transmitter with a UTP cable following the standard of direct interconnection method. HDMI Out: Connect to the HDTV or monitor HDMI input port. IR In: Channel 1 IR Receiver. Connect to an IR receiver cable. IR Out: Channel 2 IR Transmitter. Connect to an IR emitter cable. RS-232: Phoenix jack provide Serial port control signal from transmitter to receiver. Connection Signal Indicator Lamp Illuminate: The Transmitter and Receiver are in good connections status. Flashing: The Transmitter and Receiver are in poor connections status. Dark: The Transmitter and Receiver are not connected. Data Signal Indicator Lamp Illuminate: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Dark: No HDMI signal. Description 1 POC (Power over Cable) Application Example 8 / 10 Description 2 Bidirectional Infrared control Application Example Description 3 Bidirectional RS232 control Application Example 9 / 10 6. Connection Diagram 10 / 10Adobe PDF Library 21.1.174