Hama Smartwatch 5000 / 5010 / 6010

Introduction and Explanations

Thank you for choosing a Hama product! Please take the time to read the following instructions and notes first. Keep this manual in a safe place for future reference.

Your new smartwatch is an ideal companion for a healthy lifestyle and motivates you to move throughout the day. In addition to the time and date display, it collects step count, heart rate, and calorie data. The wireless Bluetooth connection to your smartphone allows you to record data via the associated "Hama FIT move" app, so you can continuously track your progress and achieve your personal fitness goals.

Explanation of Warning Signs and Notes

[warning] Warning: Used to mark safety instructions and to draw attention to special dangers and risks.

[info] Note: Used to provide supplementary information or important details.

Package Contents

• "Smartwatch 5000" / "Smartwatch 5010" / "Smartwatch 6010" smartwatch
• 1 USB charging cable
• Quick start guide
• Safety information

Note: The illustrations and symbols in this user manual correspond to the Smartwatch 6010 model (article numbers 00178619, -20, -21). The appearance of the Smartwatch 5000 (00178614, 00178615) and Smartwatch 5010 (00178616, 00178617) models may differ.

Safety Instructions

[warning] Warning: Please read the following instructions and notes carefully before using the product. Information regarding product use can be found in this user manual.

• The product is intended for private, non-commercial use only.
• Use the product only for its intended purpose.
• Protect the product from dirt, moisture, and overheating, and use it only in a dry environment.
• Do not operate the product near heating systems, other heat sources, or in direct sunlight.
• Do not operate the product beyond the performance limits specified in the technical data.
• Do not use the product in locations where the use of electronic devices is prohibited.
• The battery is permanently installed and cannot be removed.
• Do not open the product and do not operate it further if it is damaged.
• Do not attempt to service or repair the product yourself. Entrust all maintenance work to qualified personnel.
• Do not drop the product or expose it to strong vibrations.
• Do not make any modifications to the product. Doing so will void all warranty claims.
• Dispose of packaging material immediately according to local waste disposal regulations.
• Do not incinerate the battery or the product.
• Do not modify and/or deform/heat/disassemble batteries.
• When traveling by car or sports equipment, do not let the product distract you from the traffic situation and your surroundings.
• Consult a doctor before starting an exercise program.
• During exercise, continuously monitor your body's reactions and call a doctor in case of emergency.
• Seek medical advice if you have health problems and wish to use the product.
• The product is a utility item, not a medical device. Therefore, it is not suitable for diagnosis, therapy, treatment, or prevention of diseases.
• Prolonged skin contact may cause skin irritation and allergies. If symptoms persist, consult a doctor.
• This product is not a toy. It contains small parts that can be swallowed, posing a choking hazard.
• Use the product only in moderate weather conditions.

Electrical Shock Hazard

• Do not open the product and do not operate it further if it is damaged.
• Do not use the product if the AC adapter, connection cable, or mains cable is damaged.
• Do not attempt to service or repair the product yourself. Entrust all maintenance work to qualified personnel.

[warning] Pacemaker Warning

The product emits a magnetic field. Before use by individuals with pacemakers, consult a doctor about whether the product may affect pacemaker function.

[info] Note - Air Travel

• This product is a continuous radio transmitter. Please note that the transport and use of radio transmitters during certain phases of flight (e.g., take-off/landing) is prohibited for safety reasons.
• Before air travel, check with the airline about whether you can take your fitness tracker with you. If in doubt, leave the product at home.

[warning] Battery Warning

• Use only approved chargers or USB connectors for charging.
• Do not continue to use or attempt to repair defective chargers or USB connectors.
• Do not overcharge or excessively discharge the product.
• Do not store, charge, or use the product in extreme temperatures or under extremely low air pressure (e.g., at significant altitudes).
• During prolonged storage, recharge the battery regularly (at least quarterly).

Controls

The following describes the controls of the smartwatch:

1. Control Button: Used for powering on/off, waking the screen, and navigating menus.
2. Full Touchscreen Display: The primary interface for interaction.
3. Detachable Strap: Allows for easy replacement or adjustment.
4. Clasp: Secures the strap around the wrist.
5. Charging Connector: Port for connecting the USB charging cable.

A diagram illustrates these controls, showing the button [1], touchscreen [2], strap [3], clasp [4], and charging connector [5].

Getting Started

Note: The descriptions and illustrations in this manual are based on version 1.5.4 of the Hama FIT move app and firmware version 1.01.00 of the smartwatch. Updates to the app or smartwatch may result in changes to names or illustrations.

5.1 Charging

• Fully charge the smartwatch before its first use.
• Connect the charging cable to a free USB port on your computer or a USB charging device, and then to the smartwatch's charging contacts [5]. Refer to the user manual of the USB charging device you are using.

[info] Note:

• The charging time required for a full battery charge is approximately 150 minutes. When the battery indicator shows as fully charged, the charging process is complete. Disconnect the smartwatch from the power supply.
• If the battery level drops to 10%, charge your smartwatch to avoid operational limitations.

5.2 Wearing and Powering On

• Before wearing and switching on for the first time, connect the smartwatch to the supplied charging cable and a power source.
• After successful charging, wear your smartwatch on your wrist and secure the strap [3] using the clasp [4].
• To start the smartwatch, press and hold the control button [1] for 3 seconds.

A diagram shows the smartwatch on a wrist, with a hand pressing the button for 3 seconds, leading to the watch display showing time and activity data.

[info] Note:

• For optimal use of measurement functions, your smartwatch should fit snugly on the upper part of your forearm, and wearing it should be comfortable. The distance between the smartwatch and the wrist bone should be approximately one finger-width.
• For optimal recording of your activities, wear your smartwatch on your left wrist if you are right-handed, and on your right wrist if you are left-handed.

5.3 Powering Off

• To turn off the smartwatch, navigate to the [SETTINGS] menu, then to the [GENERAL] submenu, and tap the [TURN OFF] item. Confirm the shutdown when prompted.

Setting Up the Smartwatch

To access all functions of your smartwatch, install the "Hama FIT move" application. The following sections provide information on downloading and setting up the app.

6.1 Downloading the "Hama FIT move" App

[info] Note: Supported operating systems are:

• iOS 9.0 or newer
• Android 6.0 or newer

After the initial power-on, the device will prompt you to download the corresponding "Hama FIT move" app onto your smartphone. The appropriate QR code will appear on the smartwatch display.

• Scan the QR code with your smartphone, or download the app from the Play Store (Android) or the App Store (iOS): link.hama.com/app/fit-move
• Follow your smartphone's instructions to install the app.

[info] Note: For more information on the app's displays, menus, and functions, refer to the "Hama FIT move" user manual.

6.2 Pairing the Smartwatch and Smartphone

[info] Note:

• To display incoming calls, SMS messages, WhatsApp messages, and other notifications on your smartwatch, activate the push notification mode in your smartphone's settings.
• During the app setup, you will be asked to grant permissions for the app to access your device's functions. Grant these permissions to access all smartwatch functions.
• Start the app on your smartphone and confirm your agreement to the privacy policy. Answer the questions that appear.

For an optimal user experience, create a user account. Creating a user profile allows you to retrieve your personal data even if you change your smartphone, ensuring your personal data is always accessible. Creating a user account is not a prerequisite for using the app.

• To create a user account, tap the [LOGIN] menu item and select the [REGISTER NOW] option at the bottom of the screen. Enter your email address and a password, then tap the [NEXT STEP] button.
• Enter the verification code sent to your email address. Check your Spam folder if necessary.
• After successful registration, you can enter your username and personal data, and assign a profile picture. Tap [NEXT STEP] to continue setup.
• The device will then start searching for the "Smartwatch 6010".
• Follow the app's instructions on your smartphone to connect with the smartwatch. Your smartphone will establish a Bluetooth connection with the smartwatch.

A series of diagrams illustrate the pairing process: a smartphone with Bluetooth enabled, the Hama FIT move app interface, and the device connection screen.

• To establish the connection between the smartwatch and the app, select "Smartwatch 6010" and tap [CONNECT DEVICE].
• To confirm the connection, tap the [ ] symbol on the smartwatch display and complete the setup in the app.
• If a timeout occurs, repeat the process.

Afterward, complete your personal settings, which can be modified later in the app (refer to the "Hama FIT move" user manual). Your smartwatch is now connected to the app, and the synchronization process will begin.

[info] Note:

• Synchronize your smartwatch with the app before first use. If you record an activity before the first synchronization, the activity will not be transferred to the app.
• To initiate manual synchronization between the smartwatch and the app, swipe down on the app's home screen.
• Due to the smartwatch's limited storage, synchronize it with the app at least once a week to avoid data loss.

[info] Note:

• After the first synchronization with the app, your smartwatch will automatically adopt the time, date, and language set on your smartphone.
• The time and date cannot be set manually.
• The language of your smartwatch's display depends on the settings selected in the app. Until setup is complete, the display language will remain English. Select your desired display language in the app (refer to the "Hama FIT move" user manual).
• The app will notify you when a firmware update is available for your smartwatch. Perform app updates for the smartwatch to function correctly.

Operating the Smartwatch

The following sections provide information on the smartwatch's menu system and operation. Your smartwatch is equipped with a touchscreen.

• Tap symbols and menus, or swipe your fingers across the screen to navigate through menus or perform functions.
• Press the control button [1] to activate the smartwatch display. Then, by swiping your finger across the display, you can cycle through the various displays and menu items as shown below.
• Access submenus by tapping their respective symbols.
• Pressing the control button [1] allows you to open the main menu or exit a menu and return to the home screen.
• Pressing and holding the control button [1] allows you to restart or power off the smartwatch.

[info] Note: The following diagrams provide an overview of the menu structure and all menu items for all models.

Navigation and Functions

For Smartwatch 5000:

Quick Settings: Do Not Disturb, Display brightness, Wake screen, Torch, Drainage, Settings, Alarm clock, 100% Energy-save mode, Telephone search.

Functions: Activity, Phone, Language assistant, Workout (sport modes), Workout record, Heart rate, SpO2, Stress, Sleep, Breath training, Clock, Weather, Cycle report, Music, Camera, Telephone search, Calculator, Calendar, Games, Settings.

Shortcuts: Workout data, Steps, Heart rate, Stress, Workout (sport modes), Sleep, Weather, Music. (Shortcuts are customizable via the Hama FIT move app).

Navigation is performed via swipes (left/right) to access Shortcuts, swipes (up) for Notifications, and button presses for Quick Settings or Apps.

For Smartwatch 5010:

Quick Settings: Do Not Disturb, Display brightness, Wake screen, Torch, Drainage, Settings, Alarm clock, 100% Energy-save mode, Telephone search.

Functions: Activity, Phone, Language assistant, Workout (sport modes), Workout record, Heart rate, SpO2, Stress, Sleep, Breath training, Weather, Event reminder, Cycle report, Music, Camera, Telephone search, Alarm clock, Timer, Stopwatch, World clock, Settings.

Shortcuts: Workout data, Heart rate, SpO2, stress, Workout (sport modes), Sleep, Weather, Music. (Shortcuts are customizable via the Hama FIT move app).

Navigation is performed via swipes (left/right) to access Shortcuts, swipes (up) for Notifications, and button presses for Quick Settings or Apps.

For Smartwatch 6010:

Quick Settings: Do Not Disturb, Display brightness, Wake screen, Torch, Drainage, Alarm clock, Energy-save mode, Telephone search, Settings.

Functions: Activity, Phone, Language assistant, Workout (sport modes), Workout record, Heart rate, SpO2, Stress, Sleep, Cycle report, Breath training, Clock, Weather, Music, Camera, Telephone search, Calculator, Calendar, Games, Settings.

Shortcuts: Workout data, Steps, Heart rate, Stress, Workout (sport modes), Phone, Sleep, Music, Weather. (Shortcuts are customizable via the Hama FIT move app).

Navigation is performed via swipes (left/right) to access Shortcuts, swipes (up) for Notifications, and button presses for Quick Menu or Apps.

7.1 Information Regarding Operation

Workout (Sport Modes) Information:

• Use the built-in GPS for outdoor activities. The device searches for a GPS signal when starting an activity. Once a GPS signal is acquired, you can begin the activity. You can also start an activity without a GPS signal. Depending on the selected activity, the system may not be able to record all data without a GPS signal.
• Please note that it may take a few minutes for your smartwatch to acquire a GPS signal. This is especially true if you are using the built-in GPS for the first time, if you have not used it for a long time, or if you are in a location far from your last GPS position. To shorten the required time, connect your smartwatch to the app on your smartphone to transfer A-GPS data. A prompt may appear on your watch display in this case.
• Only the Smartwatch 6010 has built-in GPS and supports the following Global Navigation Satellite Systems (GNSS): GLONASS, GALILEO, BEIDOU.

Voice Assistant Information:

• The "Voice Assistant" function allows you to access the voice assistant of your paired and compatible smartphone by tapping the [ ] symbol. This requires a Bluetooth connection between the two devices. Communication with the voice assistant is audio-only. Compatibility is not guaranteed for all manufacturers or operating system versions. Restrictions may occur, especially with the Android operating system. If necessary, contact your smartphone manufacturer. It is possible that a software update is available for your smartphone that resolves this issue.
• For optimal use of the voice assistant, consider the following settings on your smartphone:
  • Google Assistant (Android): Set Google Assistant as the default voice assistant on your Android smartphone and enable Siri usage in lock mode.
  • Apple Siri (iOS): Activate Siri on your iPhone and enable Siri usage in lock mode.

Maintenance and Care

Clean the product with a lint-free, slightly damp cloth. Do not use aggressive cleaning agents.

Warranty Exclusion

Hama GmbH & Co KG assumes no liability or warranty for damages resulting from improper installation, assembly, or use of the product, or from failure to comply with the user manual and/or safety instructions.

Supported Languages

The following list provides an overview of the languages supported by the smartwatch display and the "Hama FIT move" application:

Technical Data

The following tables contain the technical data for the respective models:

Smartwatch 5000 (00178614 / 00178615)

Smartwatch 5010 (00178616 / 00178617)

Smartwatch 6010 (00178619 / 00178620 / 00178621)

Disposal Instructions

Environmental Instructions: In accordance with Directives 2012/19/EU and 2006/66/EC, the following applies: Electrical and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are legally obligated to return used electrical and electronic devices and batteries to designated collection points or to the point of sale. Details are regulated by national law. The symbol on the product, its packaging, or its manual indicates this obligation. By collecting, returning, or recycling old devices in any form, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hama GmbH & Co KG hereby declares that these devices comply with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of Conformity according to the relevant directive can be found here: www.hama.com > Search > "Article number" > Downloads.

Service and Support

Hama GmbH & Co KG
86652 Monheim / Germany

Service and Support:
www.hama.com
+49 9091 502-0

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names are those of their respective owners. All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.