Hama Smartwatch 5000 / 5010 / 6010

1. Explanation of Warning Symbols and Notes

Warning ⚠️ This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note ⓘ This symbol is used to indicate additional information or important notes.

2. Package Contents

• Smartwatch "Smartwatch 5000" / "Smartwatch 5010" / "Smartwatch 6010"
• 1 USB charging cable ?
• Quick start guide
• Safety information sheet

Note: Illustrations and symbols comply with Smartwatch 6010 model (Article Number 00178619, -20, -21). Smartwatch 5000 (00178614, 00178615) and 5010 (00178616, 00178617) models may vary.

3. Safety Instructions

This product is intended for private, non-commercial use only. Use only for the intended purpose. Protect from dirt, moisture, and overheating; use in dry environments only. Do not use near heaters, heat sources, or in direct sunlight. Do not operate outside specified power limits. Do not use where electronic products are not permitted. The battery is integrated and cannot be removed. Do not open or operate if damaged. Do not attempt self-service or repair; use qualified experts. Do not drop or expose to major shocks. Do not modify the product; this voids the warranty. Dispose of packaging material according to regulations. Do not incinerate the battery or product. Do not tamper with, damage, heat, or disassemble batteries. Do not allow distraction by the product while driving or using sports equipment; maintain awareness of traffic and surroundings. Consult a doctor before starting an exercise program. Be aware of your body's response during exercise and consult a doctor in an emergency. Consult a doctor if you have a medical condition. This is a consumer product, not a medical device; it is not for diagnosis, therapy, cure, or prevention of illnesses. Prolonged skin contact may cause irritation or allergies; consult a doctor if symptoms persist. This product is not a toy; it contains small parts that can be swallowed, posing a suffocation hazard. Use only under moderate climatic conditions.

Risk of Electric Shock

• Do not open or operate if damaged.
• Do not use if the AC adapter, adapter cable, or power cable is damaged.
• Do not attempt self-service or repair; use skilled personnel.

Warning - Cardiac Pacemakers

This product generates magnetic fields. Consult a doctor before use if you have a pacemaker, as its function could be affected.

Information - Air Traffic

This product is a radio transmitter. Do not use during certain flight phases (e.g., take-off/landing) for safety reasons. Check with your airline before flying; if in doubt, leave the product at home.

Warning - Rechargeable Battery

• Use only suitable charging devices or USB ports.
• Do not use defective chargers or USB ports; do not attempt repair.
• Do not overcharge or allow the battery to fully discharge.
• Avoid storing, charging, or using in extreme temperatures or low atmospheric pressures (high altitudes).
• When stored long-term, charge batteries regularly (at least every three months).

4. Control Elements

The smartwatch has the following control elements:

• 1. Control button
• 2. Full-touch display
• 3. Removable watchstrap
• 4. Fastener
• 5. Charging contact

[Textual description of control elements diagram: The smartwatch is shown from the front and back. The front view highlights the display and the control button. The back view shows the charging contacts. The watch strap is depicted attached, featuring a fastener.]

5. Getting Started

Note: Instructions are based on Hama FIT move app v1.5.4 and smartwatch firmware v1.01.00. Updates may cause deviations.

5.1 Charging

• Charge the smartwatch fully before first use.
• Connect the charging cable to a USB port (computer or charger) and the charging contact [5] on the smartwatch. Refer to the USB charger's instructions.

Note ⓘ A full charge takes approximately 150 minutes. Disconnect when the battery indicator shows full. Charge when the battery level drops to 10% to avoid functional restrictions.

5.2 Putting on and Switching On

• Before first use, connect the smartwatch to a power source via the charging cable.
• After charging, wear the smartwatch and close the watchstrap [3] with the fastener [4].
• Press and hold the control button [1] for 3 seconds to start the smartwatch.

[Textual description of putting on and switching on diagram: Illustrates the smartwatch being charged, then worn on a wrist with the strap fastened, and finally the control button being pressed for 3 seconds to power it on.]

Note ⓘ For optimal measurement, fit the smartwatch snugly but comfortably on the top side of the forearm, about one finger-width above the wristbone. Wear on the left wrist if right-handed, and right wrist if left-handed, for best activity recording.

5.3 Switching Off

To switch off, open the [SETTINGS] menu, navigate to the [GENERAL] submenu, and tap [TURN OFF]. Confirm the prompt.

6. Setting Up the Smartwatch

Install the "Hama FIT move" app for full functionality.

6.1 Downloading the "Hama FIT move" app

Note ⓘ Supported operating systems: iOS 9.0 or higher, Android 6.0 or higher.

After first switching on, the smartwatch prompts you to download the "Hama FIT move" app. Scan the QR code displayed on the smartwatch or download from the Play Store (Android) or App Store (iOS).

Link: link.hama.com/app/fit-move

Follow smartphone instructions to install.

Note ⓘ Further app details are in the "Hama FIT move" App Guide manual.

6.2 Pairing the Smartwatch and Smartphone

Note ⓘ Activate push mode for notifications (calls, messages) in smartphone settings. Grant app permissions for full smartwatch functionality. Start the app, agree to privacy, answer questions.

Create a user account for optimal experience and data access across devices (not mandatory). To register, tap [LOG IN], then [REGISTER NOW], enter email/password, tap [NEXT STEP]. Enter verification code (check spam folder). After successful registration, enter username, personal data, and profile picture. Tap [NEXT STEP].

The smartwatch search begins. Follow app instructions to connect. Your smartphone will establish a Bluetooth connection.

[Textual description of pairing process diagram: Shows the pairing process on a smartphone. First, Bluetooth is enabled. Then, the "Hama FIT move" app is displayed, with options to link a device. Finally, "Smartwatch 6010" is selected and "PAIR THE DEVICE" is tapped. A confirmation symbol is shown.]

Select "Smartwatch 6010" and tap [PAIR THE DEVICE]. Tap the [ symbol in the app to confirm and complete setup. If a timeout occurs, repeat the process.

Define personal settings in the app (can be adapted later). Your smartwatch is now linked, and synchronization begins.

Note ⓘ Synchronize before first use; unsynchronized activities may not transfer. Manually sync by dragging down on the app home page. Synchronize weekly to prevent data loss due to limited smartwatch storage.

Note ⓘ After the first sync, the smartwatch automatically adopts time, date, and language from your smartphone. These cannot be set manually. Display language is set via the app; it defaults to English during setup. The app will alert you to firmware updates.

7. Operating the Smartwatch

This section covers operation and menu structure. The smartwatch has a touchscreen.

• Navigate menus and execute functions by tapping symbols/menus or swiping.
• Press the control button [1] to activate the display. Swipe to switch between views and menu options.
• Access submenus by tapping their symbols.
• Press the control button [1] to open the main menu or return to the home screen.
• Press and hold the control button [1] to restart or turn off the smartwatch.

Note ⓘ Graphics provide overviews of menu structures for all models.

7.1 Notes on Operation

Note: "Workout" Application

Outdoor activities may use integrated GPS. GPS signal search begins upon starting an activity. You can start without GPS, but some data may not be recorded. GPS signal detection can take several minutes, especially on first use, after long periods of disuse, or in new locations. Linking to the app for A-GPS data transfer can shorten this time.

Only Smartwatch 6010 has integrated GPS and supports GNSS (GLONASS, GALILEO, BEIDOU).

Note: "Language Assistant" Application

The language assistant feature allows access to smartphone assistants via the [◉] symbol, requiring a Bluetooth connection. Communication is audible only. Compatibility may vary by manufacturer and OS; contact your smartphone manufacturer for issues. Software updates may resolve problems.

For optimal use:

• Google Assistant (Android): Set as default assistant and permit use in locked state.
• Apple Siri (iOS): Activate Siri and permit use in locked state.

8. Maintenance and Care

Clean the product with a slightly moist, lint-free cloth. Do not use aggressive cleaning agents.

9. Legal Disclaimer

Hama GmbH & Co KG assumes no liability or warranty for damage from improper installation, assembly, use, or failure to observe operating/safety information.

10. Languages Supported

The following table lists languages supported by the smartwatch user interface and "Hama FIT move" app:

11. Technical Data

Smartwatch 5000 (00178614 / 00178615)

Smartwatch 5010 (00178616 / 00178617)

Smartwatch 6010 (00178619 / 00178620 / 00178621)

12. Information on Disposal

Environmental Protection: In accordance with EU directives, electrical and electronic devices and batteries must not be disposed of with household waste. Consumers must return them to designated collection points or points of sale. This symbol [♻️] indicates compliance with these regulations. Recycling and reuse contribute to environmental protection.

13. Declaration of Conformity

Hama GmbH & Co KG declares compliance with Directive 2014/53/EU. The full declaration can be found at: www.hama.com > Search > "Article number" > Downloads.