Flama 1676FL Vacuum Cleaner with Bag
Manual de instruções / Manual de instrucciones / Instruction manual / Manuel d'instructions
Product Overview
This document provides comprehensive instructions for the Flama 1676FL vacuum cleaner with bag.
The vacuum cleaner features a powerful motor and is designed for efficient cleaning of various surfaces.
Model: 1676FL
Safety Instructions
Always ensure the appliance is connected to an earthed socket.
This appliance can be used by children aged 8 and over, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they are supervised or have received instructions on safe use and understand the risks involved.
Children must not play with the appliance. Cleaning and maintenance should not be carried out by unsupervised children.
Turn off the vacuum cleaner using the ON/OFF switch and unplug it before any maintenance or cleaning activity.
Do not vacuum incandescent materials, water, or any other liquid. Never vacuum flammable substances or hot ash.
If the suction tube becomes blocked, immediately disconnect the appliance from the power supply and unblock the tubes.
Never point the suction tip at people or animals, especially not at eyes or ears. Do not put it in your mouth when connected and switched on.
Ensure the dust bag is correctly placed; otherwise, the appliance may be damaged.
Never use the appliance without motor protection filters, as this may damage the motor and reduce its useful life.
Always use accessories recommended by the manufacturer.
If the appliance is not working properly or is damaged (e.g., power cord or plug), contact an Authorized Flama Technical Assistance Service immediately.
This product complies with Electromagnetic Compatibility and Low Voltage Directives.
Description of Parts
- 1. ON/OFF button (on/off)
- 2. Cord retraction button
- 3. Suction power regulator
- 4. Flexible tube
- 5. Telescoping tube
- 6. Multi-surface brush
- 7. Parquet brush
- 8. Crevice brush tool
- 9. Bag status indicator
- 10. Release pedal
Vacuum Assembly
- Remove all components from the packaging.
- Attach the flexible tube to the vacuum body, ensuring a secure fit.
- Connect the handle of the flexible tube to the telescoping tube.
- Attach the desired accessory to the end of the telescoping tube.
The multi-surface brush has two positions: one for soft surfaces and one for hard surfaces. The crevice brush tool is for narrow, hard-to-reach areas.
Operation
Before Use
Ensure all filters and the dust bag are correctly installed. Incorrectly installed or damaged bags/filters can damage the appliance.
Using the Vacuum
- Extend the power cord and plug it into a wall outlet. Do not pull the cord beyond the red marker.
- Adjust the telescoping tube to the desired length.
- Select the appropriate setting on the multi-surface brush for your floor type:
- Hard flooring: Lower the brushes to protect the surface.
- Carpets: Raise the brushes for deep cleaning.
- Use the Parquet Brush for parquet and other sensitive floors.
- Turn on the vacuum by pressing the ON/OFF button.
- Adjust the suction power regulator for desired suction.
- Turn off the vacuum by pressing the ON/OFF button when finished.
- Unplug the appliance from the wall outlet.
- Press the cord retraction button to retract the cord.
- To move the appliance between rooms, unplug it and carry it by the handle. Never pull the appliance by the power cord.
Cleaning and Maintenance
Always unplug the appliance before performing any maintenance or replacing parts.
Turn off and unplug the vacuum after use.
Clean the exterior with a soft, damp cloth, followed by a soft, dry cloth. Do not use harsh liquids.
Replacing the Dust Bag
If the bag status indicator turns on, check and replace the dust bag if necessary.
Press the release pedal, lift the dust bag compartment lid, remove the old bag (discard or empty if reusable), and insert a new bag. Close the lid.
Note: The bag status indicator may also flash if there is a blockage. Check for the cause of the blockage.
Filters
The motor protection filter (located near the bag) should be removed and rinsed with water twice a year or when visibly clogged. Replace if damaged.
If the filter is worn, clean it by removing the grille and shaking out accumulated dirt. Reinstall the filter and grille.
To maintain optimal performance, wash the motor protection filter and the exhaust filter (HEPA) after every 5 bag replacements. Hand wash filters in lukewarm water and allow them to dry completely before reinstallation. Do not use hot water or detergents. Replace damaged filters.
Do not use the vacuum without the bag and filters installed.
Troubleshooting and Repair
In case of malfunction, take the appliance to an authorized technical assistance service. Do not attempt to disassemble or repair the appliance yourself, as this may be dangerous.
Environmental Protection
The symbol ♻️ indicates separate collection of electrical and electronic equipment.
The main objective of separate waste collection is to reduce disposal quantities, promote reuse, recycling, and other forms of recovery to minimize negative environmental effects.
When the appliance is no longer in use, it should not be disposed of with unsorted municipal waste. The user is responsible for delivering it free of charge to selective collection facilities.
Equipment no longer in use can also be returned to points of sale when purchasing equivalent new equipment. For more detailed information on collection points, contact your local council or point of sale.
