Features
- SMD5050 LED Beads; FPCB Circuit Board; Every 3 LED lights in one segment.
- Main Colors of the Light: Red/Blue/Green.
Key Features: ? App Control, ?️ Voice Control, ⏰ Single/Countdown Timing, ➡️ Share Control, ? Dimming, ? Music Reactive Mode, ? 16M Colors, ?️ Remote Control, ? Bluetooth Control, ? Scene Mode.
Operation Instructions
-
1. Clean the surface
Prepare the mounting surface for optimal adhesion.
[Diagram: A hand wiping a surface clean.]
-
2. Tear the backing tape
Peel off the adhesive backing from the LED strip.
[Diagram: A hand carefully peeling the backing tape from the LED strip.]
-
3. Adhere it to the surface
Stick the LED strip onto the prepared surface, applying gentle pressure.
[Diagram: Hands pressing the LED strip onto a surface, showing multiple segments being adhered.]
-
4. Download the eWeLink App
Download the "eWeLink" app from the App Store or Google Play. Scan the QR code for direct download.
[Diagram: A smartphone displaying the eWeLink app interface, with icons for App Store and Google Play download, and a QR code.]
-
5. Power on
Connect the power adapter to the LED strip and plug it into a power source.
[Diagram: A power adapter connected to the LED strip, with arrows indicating the connection flow.]
Cutable every 100mm: The LED strip can be cut at the designated 100mm intervals for custom lengths.
[Diagram: An LED strip showing cut marks at 100mm intervals, with scissors indicating where to cut.]
-
6. Pairing
Remove the battery insulation sheet from the remote control. Long press the "on" button for 5 seconds until the light strip flashes. This indicates the device has entered Bluetooth Pairing mode.
[Diagram: A remote control with a finger pressing the "on" button, with a 5-second timer indicator.]
Note: If pairing is not completed within 1 minute, the device will exit Bluetooth Pairing mode. To re-enter, long press the "on" button on the remote for 5 seconds until the strip flashes.
-
7. Add the device
Open the eWeLink App, tap the "+" icon, select "Bluetooth Pairing", and follow the on-screen prompts to add the device.
[Diagram: A smartphone screen showing the eWeLink app interface with the "+" icon highlighted and "Bluetooth Pairing" selected.]
Specifications
Model: L2-2M, L2-5M, L2 Lite-5M-EU, L2 Lite-5M-US
Light Strips
| Parameter | Details | Parameter | Details |
|---|---|---|---|
| Input Voltage | DC 12V | LED QTY | 30 LEDs/m |
| Luminous Flux | ≥300lumens/m | Life Expectancy | > 25000 hours |
| Beam Angle | L2: 140°, L2 Lite: 120° | Operating Temperature | -15°C ~ 50°C |
| Working Humidity | ≤95% | Protection Rating | L2: IP65 L2 Lite: IP20 |
| Material | FPCB | ||
| Light Decay | Less than 3% after 1000 hours constant work |
Power Adapter
| Parameter | Details | Parameter | Details |
|---|---|---|---|
| Input | 100-240V AC 50/60Hz 0.6A Max | Output | DC 12V 2000mA |
| Protection | Anti-overvoltage, Anti-overload, Anti-overtemperature |
Wi-Fi Controller
| Parameter | Details | Parameter | Details |
|---|---|---|---|
| Input | DC 5-12V | Power | 24W (36W Max) |
| Remote Control | 24 Keys IR Remote Controller | Wi-Fi | IEEE 802.11 b 2.4GHz |
| Remote controller battery | 3V (CR2025) | Bluetooth | 5.0 BLE |
| App operating systems | Android & iOS |
Wi-Fi Control Setting
In the eWeLink App, navigate to "Device Settings" and select "Wi-Fi Settings" to add or change the network connection.
[Diagram: Smartphone screen showing the eWeLink app's "Device Settings" with "Wi-Fi Settings" selected.]
Note: When Wi-Fi is not available, the device will automatically switch to Bluetooth control. Ensure Bluetooth is enabled on your mobile phone.
Re-establish Pairing
Long press the "on" button on the remote control for 5 seconds until the light strip flashes. This re-enters Bluetooth Pairing mode, allowing you to pair again.
[Diagram: Remote control with a finger pressing the "on" button, with a 5-second timer indicator.]
Factory Reset
To restore the device to factory settings, delete the device from the eWeLink app.
Safety Warning
- Before using this product, ensure the voltage is compatible with the product's working voltage. Using an incorrect voltage may damage the product and cause safety hazards.
- The LED light sources are not replaceable. Do not dismantle the product.
- The light strip generates heat during operation. Ensure adequate ventilation for heat dissipation.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type L1-2M/L1-5M/L1 Lite-5M-US/L1 Lite-5M-EU is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
