Anslut Charger
Item No. 021124
Operating Instructions
Important! Read the user instructions carefully before use. Save them for future reference.
Safety Instructions
- For indoor use only.
- Check that the nominal data for the connected appliance corresponds to the technical data for the product. The nominal data for connected appliances must not exceed the technical data for the product.
- Do not connect two or more timers together.
- Always check that the plug on the connected power cord is fully inserted into the charger socket.
- If the charger needs cleaning, unplug it from the mains and wipe it with a dry cloth.
- Do not immerse the charger in water or any other liquid.
- This product is not suitable for use in places where children can be present.
Symbols
- ? Read the instructions.
- Class II
Approvals and Disposal
- Approved in accordance with the relevant directives.
- Recycle discarded product in accordance with local regulations. [Recycle symbol]
Description
Charger with two USB ports and countdown timer with five modes. The device features two USB ports, a setting button, and an indicator light that displays the current mode: constant ON, or countdown timers for 6, 4, 2, or 1 hour.
Parts
- Status light: Indicates constant switched on mode, or countdown 6, 4, 2 or 1 hour.
- USB 1: Voltage supply 5.0 VDC, count down can be set.
- USB 2: Voltage supply 5.0 VDC, always on.
- Settings button: Press to switch between the modes ON-6H-4H-2H-1H-ON for USB 1.
Operation
- Plug the charger into a power point. The status light ON goes on and USB 1 and USB 2 have a constant output voltage of 5.0 VDC.
- NOTE: The maximum permitted load is 3.1 A.
- Press the settings button to set the countdown time for USB 1. The setting switches between the modes ON-6H-4H-2H-1H-ON each time the button is pressed.
- When the set time has counted down, USB 1 is without voltage and the status light goes off.
- The next time the settings button is pressed, the product is activated with the last setting.
- USB 2 always has an output voltage 5.0 VDC.
- Connect the product to an easily accessible power point near the appliance to be supplied with power.
Technical Data
Information Published | Value and Precision | Unit |
---|---|---|
Manufacturer's name or trade mark, commercial registration number and address | Anslut | - |
Model identifier | 021124 | - |
Input voltage | 230 | V |
Input AC frequency | 50 | Hz |
Output voltage | 5,0 | V |
Output current | 2,4 | A |
Output power | 12 | W |
Average active efficiency | 80,1 | % |
Efficiency at low load (10 %) | 77,8 | % |
No-load power consumption | 0,08 | W |