Anslut Digital Outdoor Timer 006248

Safety Instructions

• For outdoor use.
• Do not connect two or more timers together.
• Do not connect appliances requiring more than 8 A.
• Do not connect appliances with an output exceeding 1800 W.
• Always ensure the appliance plug is fully inserted into the timer socket.
• If the timer needs cleaning, unplug it from the mains and wipe it with a dry cloth.
• Do not immerse the timer in water or any other liquid.
• Do not connect heaters or similar equipment to the timer.
• Ensure the appliance to be controlled is switched off before plugging it into the timer.
• IMPORTANT: The timer must be placed in a vertical position to maintain the protection rating IP44.

Symbols

• 📖 Read the instructions.
• 🔱 CE Approved in accordance with the relevant directives.
• ♻ Recycle discarded product in accordance with local regulations.

Technical Data

Button Functions (FIG. 1)

The timer features the following buttons:

• CLOCK: Switches between programming mode and time display. Used with SET to set time/weekday, and with V- to switch to summertime.
• CD: Starts or stops the countdown function in AUTO mode.
• RND: Starts or stops the random function in AUTO mode.
• ON/OFF: Cycles through ON, AUTO, and OFF modes.
• SET: Sets time/weekday or confirms settings.
• A+: Increases value during setting.
• V-: Decreases value during setting.

Diagram Description: The control panel displays the current time and day, with mode indicators. Buttons are arranged around the display for operation.

Operation and Usage

Setting the Weekday and Time

1. Press SET until the weekday flashes. Use A+/V- to select the desired weekday, then press SET to confirm.
2. The hours will flash. Use A+/V- to set the hours, then press SET to confirm.
3. The minutes will flash. Use A+/V- to set the minutes, then press SET to confirm.

Switching to Summertime

Press CLOCK and V- simultaneously. The time will advance by 1 hour, and 'S' will appear on the display. Press CLOCK and V- again to revert to normal time.

Programme Settings

From time mode, press A+ to enter programming mode (1ON displayed). Program numbers range from 1 to 14. 'ON' indicates the start time and day, 'OFF' indicates the end time and day.

• Set program number and ON/OFF times using A+/V-.
• Set the specific weekday and time for each program using SET, A+, and V-.
• Press CLOCK to return to time mode.

Countdown Setting

From time mode, press V- to enter countdown settings (d ON/d OFF displayed). 'd' indicates countdown mode is active.

• Use SET to select ON (start time) or OFF (stop time).
• Set hours, minutes, and seconds using A+/V- and SET.
• Set the timer to AUTO mode to start/stop the countdown.
• Press CD to start the countdown; CD flashes when active. Press CD again to stop.

Random Function

This function starts and stops the connected appliance at irregular intervals.

• Off time range: 26-42 minutes.
• On time range: 10-26 minutes.
• Set timer to AUTO mode to activate/deactivate.
• Press RND to activate. Press RND again to deactivate.
• The random function overrides program settings.

Override/Resume Programme Settings

Use the ON/OFF button:

• ON: Overrides settings; appliance is always ON.
• AUTO: Appliance operates according to program settings.
• OFF: Overrides settings; appliance is always OFF.

Note: Program settings and random function are only active in AUTO mode.

Connection

1. Set desired program settings as described.
2. Switch off the appliance to be controlled.
3. Plug the appliance into the timer socket, and the timer into a power outlet.
4. Start the appliance.
5. The appliance will operate according to the timer settings unless an override is active.

Environmental Information

Recycle discarded products according to local regulations.