Product Overview
The IKEA NÄVLINGE is a versatile clip-on lamp designed for indoor use. It features a flexible arm and a clamp for easy attachment to various surfaces, providing adjustable lighting.
Part Numbers: 10043142, 10043143
Document Identifier: AA-2147355-5
Important Safety Instructions
⚠️ For indoor use only.
Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.
Important information! Keep these instructions for future use.
CAUTION!
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water.
Cleaning
Use a damp cloth; never a strong cleaning agent.
WARNING: Deviation from the assembly instructions may result in a risk of fire or electric shock.
FCC Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Assembly Instructions
Step 1: Attach Lamp Head
The product includes one lamp head (part numbers 10043142, 10043143). Align the threaded end of the lamp head with the opening at the end of the flexible arm and screw it on securely.
[Illustration: Shows the lamp head with threads being screwed onto the flexible arm.]
Step 2: Attach the Clamp
⚠️ Caution: Ensure the clamp is securely attached to a suitable surface.
Open the clamp and attach it to the edge of a table or shelf. The clamp is designed for surfaces with a thickness between 10 mm and 45 mm (approximately 25/64" to 1 49/64").
[Illustration: Shows the clamp being opened and attached to a table edge, with a measurement guide indicating 10-45 mm.]
Step 3: Connect Power and Adjust Arm
Plug the power adapter into the designated port on the lamp base. The flexible arm can then be bent and positioned as needed to direct the light.
[Illustration: Shows the power adapter being plugged into the lamp base, and the flexible arm being bent and adjusted.]
Final Check
Ensure the lamp head is securely attached to the arm and the clamp is stable on the surface.
[Illustration: Close-up view of the lamp head attachment and clamp connection.]
