Moes Smart Switch Module Instruction Manual

Product Models

The following models are covered:

• MS-101: Wi-Fi
• MS-101R: RF433
• MS-101WR: Wi-Fi+RF433
• MS-101-16A: Wi-Fi / 16A
• MS-101-16A-M: Wi-Fi / 16A
• MS-101B: Bluetooth/10A
• MS-101B-16A: Bluetooth / 16A

Product Specifications

• Power Supply: 90V~250V AC
• Max. Load: 2200W/10A or 3520W/16A
• Wireless Protocol: Bluetooth/Wi-Fi 2.4 GHz
• RF: 433Mhz
• Material: ABS V0
• Size: 88x38x22mm

Checklist Before Using

Wi-Fi Requirements:

• Your smartphone or tablet has connected to a 2.4G Wi-Fi with internet.
• You have the correct Wi-Fi password.
• Your smartphone or tablet must have access to the App Store or Google Play.
• Your router is MAC-open.

Bluetooth Requirements:

• Enable your smartphone Bluetooth.
• A Bluetooth hub may be required for connection when wireless remote control is needed.

Smart Life App Setup

1. Download Smart Life APP: Please scan the QR code [QR Code] or download "Smart Life" from the App Store [App Store] or Google Play [Google Play].

2. Account Setup: Register a new "Smart Life" account or log in if you already have one.

3. Power Up: Connect the device to power. The ON/OFF operating principle is that the connected appliances work/stop through live wire power on/off.

Wiring Instructions

Important Note: The WiFi Switch must be powered up by N and L wires.

Appliance Wiring Instruction

[Diagram Description: Shows wiring for a general appliance connection.]

Ceiling Lamp Wiring Instruction

[Diagram Description: Shows wiring for a ceiling lamp connection.]

Light Wiring Instruction

[Diagram Description: Shows wiring for a standard light fixture connection.]

Device Pairing and Reset

Wi-Fi Linking Method 1 (Traditional Pairing)

1. After wiring is done, press the [Reset Button] for about 5 seconds until the Wi-Fi blue LED blinks rapidly.
2. Open the Smart Life App, select "+" on the top right, and choose "Switch (Wi-Fi)" to add the device.
3. Confirm the indicator light is blinking rapidly (twice a second). Ensure your smartphone and the Wi-Fi + RF switch module are under the same 2.4 GHz Wi-Fi network.
4. The connecting process will take about 10-120 seconds. The device will be shown on the App once pairing is complete.

Wi-Fi Linking Method 2 (Only for MS-101-N/MS-101-16A)

1. Ensure your phone is connected to Wi-Fi and Bluetooth.
2. Open the Smart Life/Tuya App and click "+". The prompt page will automatically show on the screen; click "Go to add".
3. Select the device you want to add and click "+".
4. Enter the Wi-Fi Password and click "Next", waiting for the connection to complete.
5. Once added successfully, you can edit the device name and enter the device page by clicking "Done".

Reset Method

Press and hold the [Reset Button] for about 7 seconds until the Wi-Fi blue LED blinks fast.

Remote Radio Frequency (RF) Link Method (Only for MS-101R/MS-101WR)

1. Press the [Pairing Button] for 5 times until your electric devices flash about 2 times.
2. Turn on the wall panel transmitter to successfully pair.
3. After pairing, you can control the switch remotely. Repeat the procedure to pair another wall panel transmitter (maximum of six transmitters supported).

Troubleshooting

Q: How to set indicator light as rapid flashing?

1. Power on the device.
2. Hold the [Reset Button] for 5 seconds.
3. Confirm the indicator light is now rapidly flashing.

Q: How to set indicator light as slow flashing?

1. Power on the device.
2. Hold the [Reset Button] for 5 seconds. Confirm indicator light is now rapidly flashing.
3. Hold the [Reset Button] for 8 seconds until the indicator light is slowly flashing.

Device Offline Issues:

The newly added device needs about 1 minute to connect to Wi-Fi and the Internet. If it stays offline for a long time, please check the Wi-Fi LED status.

Wi-Fi LED quickly blinks one time every second:

• Wi-Fi Switch failed to connect to your Wi-Fi.
• Possible reasons:
  • You may have entered the wrong Wi-Fi password.
  • The Wi-Fi Switch is too far from your Wi-Fi router; please move it closer.
  • Ensure your router is MAC-open.
  • If still failed, try opening a mobile hotspot and adding the device again.

Voice Control Integration

Set your Echo speaker by Alexa APP (Only for MS-101/MS-101WR)

Preparation:

• Ensure your Amazon Echo device is powered on and connected to a Wi-Fi network.
• Open the Alexa App on your phone.
• Configure the Amazon Echo device: Tap the menu (top left) -> "Settings" -> "Set up a new device" (choose Echo). Follow on-screen prompts, including holding the device's small dot until it turns yellow, connecting to the hotspot, and selecting your Wi-Fi network.
• Note: The mobile phone should not run VPN software during setup.

Enable Smart Life Skill in Alexa APP

1. Complete product networking configuration in the Smart Life App. Note: Rename the device in the App to an easily identifiable name (e.g., "bed light").
2. In the Alexa App, tap "Skills" in the menu. Search for "Smart Life", then tap "Enable".
3. Enter your Smart Life account and password, then tap "Link Now" to enable the Skill.

Control the Light Switch by Voice (Alexa)

1. Discover Devices: Say, "Echo (or Alexa), discover my devices." Echo will search for devices added in the Smart Life APP (approx. 20 seconds). You can also click "Discover devices" in the Alexa APP.
2. Voice Commands: You can now control the Light Switch via Echo. Examples: "Alexa (or Echo), turn on the Light Switch" or "Alexa (or Echo), turn off the Light Switch".
3. Note: The device name must be consistent with the name in the Smart Life APP. You can group switches for simultaneous control.
4. Wake-up Names: Echo supports "Alexa", "Echo", or "Amazon" as wake-up words.

Google Assistant - Activate Smart Life in Google Home App

Preparation:

• Have downloaded the Google Home App (compatible with Android 4.2+ or iOS 8.0+).
• Have registered your Google Account.
• Have paired the Light Switch with the Smart Life App and named it recognizably.
• Have finished setting up Google Home.

Linking Smart Life to Google Home:

1. Open the Google Home App. Tap the "+" icon (upper left corner) and select "More Settings".
2. Choose "Services" from the options bar and select "Smart Life".
3. Tap "Link Account", then sign in with your Smart Life Account.
4. Tap "Link Now". Once your Smart Life account is linked, your smart devices will automatically appear.

Command the Device through Your Voice (Google Assistant)

1. To start, say "OK Google, talk to Smart Life".
2. Then, issue commands like: "Turn on the Light Switch" or "Turn off the Light Switch".
3. Note: After Smart Life is activated, you can say "Cancel" or "Stop" to exit, or say "Nothing" when prompted "What can I do for you." Then you can say "OK Google, talk to Smart Life" again to resume voice control.

Support and Warranty

Thank you for your purchase from Moes. We are here for your complete satisfaction. Please feel free to share your shopping experience.

If you have any needs, please contact us first. We will try to meet your demand.

Contact Information:

• Moes Social Media: @moesmart, @moes_smart
• Website: www.moeshouse.com
• Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
• Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
• Tel: +86-577-57186815
• Email: service@moeshouse.com
• Distributor: AMZLAB GmbH, Laubenhof 23, 45326 Essen, Made In China

Warranty Card

Product Information:

• Product Name: _________________________
• Product Type: _________________________
• Purchase Date: _________________________
• Warranty Period: _________________________
• Dealer Information: _________________________
• Customer's Name: _________________________
• Customer Phone: _________________________
• Customer Address: _________________________

Maintenance Records:

Warranty Terms:

1. During the free warranty period, if the product breaks down during normal use, free maintenance will be provided.
2. The warranty does not cover natural disasters, man-made equipment failures, unauthorized disassembly/repair, lack of warranty card, or products beyond the free warranty period.
3. Any commitment made by a third party (dealer/service provider) beyond the warranty scope shall be executed by that third party.
4. Please keep this warranty card to ensure your rights.
5. Moes may update or change products without notice; refer to the official website for updates.

Service and Recycling Information

Recycling Information

Products marked with the WEEE symbol [WEEE Symbol] must be disposed of separately from unsorted municipal waste. To protect health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment. Correct disposal and recycling help prevent negative consequences for the environment and human health. Contact your local authority for information on collection points.