KEYDIY KD Tag Manual

1. Overview

The KEYDIY KD Tag is designed for global precise positioning of items such as backpacks, wallets, umbrellas, handbags, jackets, cameras, suitcases, keys, and bicycles. It operates without data usage or annual fees and is exclusively compatible with iOS systems, not supporting Android phones.

Scan the code to view the operation video.

2. Major Functions

• Global precise positioning
• Accurate search at close range
• One-click navigation
• Battery level display
• No APP download required
• No annual fees

3. Main Working Parameters

4. Buttons Settings

• Turn on: Press the button once. A long buzz will be heard.
• Turn off: Press and hold the button for approximately 3 seconds until two short buzz sounds are heard.
• Enable Bluetooth: Double-click the button until one short buzz is heard.
• Restore factory settings: Use the "4+1 reset" method. Within 5 seconds, perform 4 quick presses followed by a long press on the fifth attempt until the device emits a prompt sound, indicating successful reset.

5. Product Binding

Before binding, ensure your iPhone's Bluetooth is enabled. Press the KD Tag button once to power it on.

1. Open the 'Find My' app on your iPhone.
2. Tap 'Add Items'.
3. Select 'Other supported items'.
4. Connect the KD Tag found.
5. Confirm your Apple ID and tap 'Continue'.
6. Finish binding.

6. Accurate Search at Close Range

When the KD Tag is within approximately 15 meters of your iPhone, open the 'Find My' app, select the item, and tap 'Play Sound'. The KD Tag's buzzer will emit a sound.

7. Precise Global Positioning

When the KD Tag is far from your iPhone, select the KD Tag in the 'Find My' items list. You can view its location on the map and tap 'Directions' to navigate to the KD Tag's position.

8. Left Behind Reminder

With the 'Notify When Left Behind' function enabled, your phone will receive a notification if the KD Tag is separated from you, indicating your item is no longer with you.

Steps: 1. Enable notification reminders for 'Left Behind'. 2. Receive a notification for 'Left Behind'.

9. Lost Mode

When Lost Mode is enabled, you will be notified when the KD Tag's location becomes available. The KD Tag is linked to your Apple ID and cannot be paired with other devices. If someone finds your KD Tag, they can view information about the manufacturer, serial number, and owner's contact details upon attempting to bind it.

Steps: 1. Enable Lost Mode. 2. Receive notification when found. 3. Retrieve item information.

10. FAQ

1. Q: Failed to bind KD Tag or find it.

   A: 1. Check if your phone's Bluetooth is enabled. 2. Ensure the KD Tag is powered on. 3. Verify if the KD Tag is already bound to another phone. If so, unbind it from the previous phone before binding it to the new one.

2. Q: Why is the positioning inaccurate or not updating?

   A: 1. The location updates in real-time when other Apple devices are nearby the Tag. If no Apple devices are in the vicinity, positioning may be delayed. 2. Location updates can take 5-15 minutes and may experience delays.

3. Q: Scope of using.

   A: This product is most effective in busy urban areas or locations with a high density of Apple devices. It is less suitable for remote areas with fewer Apple devices.

4. Q: Suitable Apple devices.

   A: Compatible only with iPhones or iPads. It is recommended to update your iPhone or iPad to the latest iOS version. Android systems are not supported.

Declaration

The final interpretation rights of this manual belong to Shenzhen Yiche Technology Co., Ltd. Reproduction or dissemination of this manual in any form without permission is prohibited. This manual is subject to change without prior notice.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.