Samsung HT-Q40 Home Theater System

Safety Warnings

CLASS 1 LASER PRODUCT

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This Compact Disc player is classified as a CLASS 1 LASER product.

Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. [Warning Symbol]

This symbol alerts you to important operating and maintenance instructions accompanying the unit. [Information Symbol]

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Precautions

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on modules or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the Home Theater to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.

During thunderstorms, disconnect AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit.

Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit.

Protect the player from moisture (e.g., vases), and excess heat (e.g., fireplace) or equipment creating strong magnetic or electric fields (e.g., speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only.

Condensation may occur if your player or disc has been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.

Features

Multi-Disc Playback & FM Tuner

The HT-Q40 combines multi-disc playback capability (DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, DVD-R/RW) with a sophisticated FM tuner.

USB Host Play

Enjoy media files (pictures, movies, tunes) from an MP3 player, digital camera, or USB memory via the USB port.

Dolby Pro Logic II

A multi-channel audio signal decoding technology that improves upon Dolby Pro Logic.

DTS (Digital Theater Systems)

An audio compression format delivering full-frequency 5.1 channel sound.

TV Screen Saver Function

The screen brightens and darkens after 3 minutes in stop mode. The unit enters power saving mode after 20 minutes in screen saver mode.

Power Saving Function

The unit automatically shuts off after 20 minutes in stop mode.

Customized TV Screen Display

Set your favorite image as background wallpaper during JPEG, DVD, or VCD playback.

AV SYNC Function

Adjusts audio delay time to sync with video when connected to a digital TV.

Description

Front Panel

Features include:

• Tuning Up & Skip [Arrow Up/Play Button]
• Tuning Down & Skip [Arrow Left/Play Button]
• Disc Tray
• Function button
• Direct Play buttons
• Standby indicator [Power Indicator]
• Power [Power Button]
• Volume [Volume Control]
• Headphone Jack
• Play/Pause [Play/Pause Button]
• Stop [Stop Button]
• Open/Close button
• USB port

Indicators include:

• DOLBY DIGITAL indicator
• LINEAR PCM indicator
• P.SCAN indicator
• TITLE indicator
• DTS indicator
• CHAPTER indicator
• TRACK indicator
• PROGRAM indicator
• GROUP indicator
• REPEAT indicator
• STEREO indicator
• TUNED indicator
• DSP indicator
• MPEG indicator
• DVD AUDIO indicator
• DOLBY PLII indicator
• PBC indicator
• DISC(1~5) indicator
• System Status Display
• RADIO FREQUENCY indicator
• SPEAKER indicator

Rear Panel

Features include:

• Video Output Connector: Connects to TV's video input jacks (VIDEO IN) to the VIDEO OUT connector.
• External Audio Input Connectors
• External Digital Optical Input Connector: For connecting external equipment with digital output.
• Cooling Fan
• 5.1 Channel Speaker Output Terminals
• FM Antenna Connector
• COMPONENT VIDEO OUTPUT Connectors: Connect a TV with component video inputs.

Accessories

Includes:

• Remote Control
• Video Cable
• FM Antenna
• User's Manual

Description - Remote Control

Buttons include:

• TV, DVD, TUNER, AUX, USB buttons
• POWER [Power Button]
• Numeric buttons (0-9)
• OPEN/CLOSE, TV/VIDEO, DISC SKIP buttons
• REMAIN, STEP, SEARCH buttons
• CANCEL, REPEAT buttons
• Play/Pause [Play/Pause Button], Stop [Stop Button]
• Tuning Preset/CD Skip button
• VOLUME [Volume Control]
• TUNING/CH button
• MENU, RETURN, ENTER buttons
• Cursor [Cursor Buttons (Up/Down/Left/Right)]
• INFO, AUDIO, SUB TITLE, DSP/EQ, TEST TONE, SOUND EDIT, DIGEST, LOGO, SLIDE MODE, EZ VIEW, DIMMER buttons
• PL II EFFECT, PL II MODE buttons
• MEMORY, P.SCAN buttons
• ZOOM, SLEEP buttons
• SLOW, MO/ST buttons

Insert Remote Batteries

1. Remove the battery cover by pressing down and sliding it.

2. Insert two 1.5V AAA batteries, observing polarity.

3. Replace the battery cover.

Caution: Follow precautions to avoid leaking or cracking cells, use correct battery types, and replace both batteries simultaneously. Do not expose batteries to heat or flame.

Range of Operation

Up to approximately 23 feet (7 meters) in a straight line, with a horizontal angle of up to 30°.

Connections

Connecting the Speakers

Position of the Home Theater: Place on a stand, cabinet shelf, or under the TV stand.

Front Speakers (L/R):

Place in front of the listening position, facing inwards (about 45°) toward you. Align tweeters to ear level. Align front face with the center speaker or place slightly in front.

Center Speaker (C):

Install at the same height as front speakers, or directly over/under the TV.

Rear Speakers (SL/SR):

Place behind the listening position. If space is limited, face them towards each other. Position about 60-90cm (2-3 feet) above ear level, facing slightly downward. Rear speakers handle sound effects and may not always produce sound.

Subwoofer (SW):

Position is not critical; place anywhere.

Selecting the Listening Position:

Position should be 2.5 to 3 times the TV screen size away from the TV (e.g., 2-2.4m for 32" TVs, 3.5-4m for 55" TVs).

Connecting Speaker Wires:

1. Press and hold the terminal tab.

2. Insert the speaker cord.

3. Release your finger.

Caution: Do not let children play with speakers. Ensure correct polarity (+/-) when connecting wires.

Note: Placing speakers near a TV may cause screen color distortion due to magnetic fields. Move speakers away from the TV if this occurs.

Connecting the Video Out to TV

METHOD 1 (Composite Video): Connect the supplied video cable from the VIDEO OUT jack to the TV's VIDEO IN jack.

METHOD 2 (Component Video): If your TV has component inputs, connect a component video cable (not supplied) from the Pr, Pb, Y jacks to the TV's corresponding jacks.

Note: When Progressive scan mode is selected, the VIDEO output (Yellow) does not output any signal.

P.SCAN (Progressive Scan) Function

Progressive Scan provides a clearer, more detailed picture without visible scan lines compared to Interlaced Scan. To activate:

1. Press the [Stop Button].

2. Press and hold the [P.SCAN Button] on the remote for over 5 seconds to toggle between Progressive Scan and Interlace Scan. "P.SCAN" will appear on the display.

For DivX discs: With no disc in the unit, press and hold [P.SCAN Button] for over 5 seconds, then load the DivX disc and play.

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan displays fields alternately (odd/even lines), creating a frame from two fields. Progressive Scan displays the entire frame line by line at once, offering a clearer image, especially for moving objects.

Note: This function requires TVs with component video inputs supporting Progressive Video. It may not work on all TVs.

Connecting External Components

Connect digital components via Optical Cable (not included) and analog components via Audio Cable (not supplied). Match connector colors. Use the [AUX Button] or [FUNCTION Button] to select the input (DIGITAL IN, AUX1, AUX2).

Connecting the FM Antenna

1. Connect the supplied FM antenna to the FM 75Ω COAXIAL terminal.

2. Move the antenna wire to find a location with good reception and secure it.

Note: This unit does not receive AM broadcasts.

Cooling Fan: Ensures proper ventilation to prevent overheating. Do not obstruct the fan or ventilation holes.

Before Using Your Home Theater

This system plays DVD, VCD, CD, MP3/WMA, and JPEG discs. Instructions may vary slightly by disc type.

Operating with the Remote Control

1. Plug in the power cord.

2. Press the [TV Button] to set the remote to TV mode.

3. Press the [POWER Button] to turn on your Samsung TV.

4. Press the [TV/VIDEO Button] to select VIDEO mode on your TV.

5. Press the [DVD RECEIVER Button] to switch to DVD RECEIVER mode.

6. Press the [FUNCTION Button] or [DVD Button] to enable DVD/CD playback.

Note: Remote control is set for Samsung TVs by default. Other brands may require code setup (see page 63).

Disc Terminology

• DVD-AUDIO: Divided into "groups" and "tracks".
• DVD-VIDEO: Divided into "titles" and "chapters".
• CDs: Divided into "tracks".
• DivX: Divided into "files".

Disc Playback

1. Press [OPEN/CLOSE Button] to open the disc tray.

2. Load a disc with the label facing up.

3. Press [DISC SKIP Button] to rotate the carousel tray for loading multiple discs.

4. Press [OPEN/CLOSE Button] again to close the compartment. Playback starts automatically.

Selecting a Disc in the Disc Changer

Use the DIRECT PLAY buttons (1-5) or [DISC SKIP] on the remote to select a specific disc.

Stopping Playback:

Press [STOP Button]. Pressing once stores the stop position (for DVDs). Pressing twice stops playback completely.

Pausing Playback:

Press [PLAY/PAUSE Button] to pause. Press again to resume.

MP3/WMA-CD Playback

1. Open the disc tray, load the MP3/WMA disc.

2. In Stop mode, use [Cursor Buttons] to select an album and press [ENTER Button]. Use [Cursor Buttons] to select a track.

3. To change albums, use [Cursor Buttons] and press [ENTER Button].

4. Press [STOP Button] to stop playback.

Note: WMA-DRM files cannot be played. Some MP3/WMA-CDs may not play depending on the recording mode.

Displaying Disc Information

Press the [INFO Button]. The display shows information like disc type, track number, elapsed time, etc. The display cycles through different information screens with each press.

Screen Display Icons:

• DVD display: Shows DVD information.
• VCD display: Shows VCD information.
• CD display: Shows CD information.
• DVD-AUDIO display: Shows DVD-AUDIO information.
• TITLE display, GROUP display, CHAPTER display
• ELAPSED TIME display, REPEAT PLAYBACK display, AUDIO LANGUAGE display, TRACK (FILE) display
• STEREO (L/R) display, DOLBY DIGITAL display, ANGLE display, SUBTITLE display

A symbol [Operation Not Possible Symbol] may appear if an operation is not possible with the current disc.

JPEG File Playback

Images from digital cameras or PCs can be played from a CD.

Slide Mode

1. Place JPEG disc.

2. Press [OPEN/CLOSE Button].

3. Press [SLIDE MODE Button]. Playback starts. Each press changes the slide transition effect (e.g., From top to bottom, From bottom to top, Rectangular shape, Vertical blinds). [RAND] applies random modes, [NONE] cancels slide mode.

Press [Skip Buttons] to move to the next/previous slide.

Digest Function

View 9 JPEG images at once. Press [DIGEST Button] during playback. Use [Cursor Buttons] to select an image and press [ENTER Button]. The selected image plays for 5 seconds.

Rotate/Flip Function

Use [Cursor Buttons] during playback to Rotate (90° Clockwise/Counterclockwise) or Flip (Vertically/Horizontally) images.

Note: Supports resolutions up to 5120 x 3480 for standard JPEG and 2048 x 1536 for progressive JPEG.

DivX Playback

Functions for DivX disc playback.

Skip Forward/Back:

Use [Skip Buttons] to move to the next/previous file.

Fast Playback:

Use [Fast Forward/Rewind Buttons] for faster playback (2x, 4x, 8x, 32x).

5 Minute Skip:

Use [Skip Buttons] to skip forward or backward by 5 minutes.

Zoom Function:

Press [ZOOM Button] to toggle between "ZOOM X2" and "ZOOM OFF". Use [Cursor Buttons] to move the zoom area.

Note: Zoom function is available only for "ZOOM X2" on DivX discs.

Subtitle Display:

Press [SUBTITLE Button] to toggle between subtitle languages or turn them OFF.

Audio Display:

Press [AUDIO Button] to toggle between available audio tracks. " " is displayed for one supported language.

DivX (Digital Internet Video eXpress)

DivX is a video format based on MPEG4 for near DVD-quality audio and video. Supports various formats (see document for details).

Note: Not all DivX files may be playable. Check supported formats and captioning requirements.

Checking the Remaining Time

Press the [REMAIN Button] to check title, chapter, or track remaining time.

Fast/Slow Playback:

Use [Fast Forward/Rewind Buttons] for fast playback. Use [SLOW Button] for slow playback. Note that sound is only heard at 2x speed during fast playback of CDs/MP3-CDs. Slow playback has no sound.

Skipping Scenes/Songs:

Briefly press [Skip Buttons] to play the previous or next chapter, track, or file. For VCDs longer than 15 minutes, pressing [Skip Button] skips back/forward 5 minutes.

Repeat Playback

Repeatedly play a chapter, title, track, or file. Press the [REPEAT Button] to cycle through playback options (CHAPTER, TITLE, GROUP, RANDOM, TRACK, DIR, DISC, OFF).

A-B Repeat Playback:

Designate a start point (A) and end point (B) of a DVD section using [INFO Button] and [Cursor Buttons], then press [ENTER Button] to repeatedly play that segment.

Note: A-B Repeat does not work with MP3, CD, or JPEG discs.

Step Function

Press the [STEP Button] to advance playback one frame at a time.

Angle Function

View scenes in different angles. Press [INFO Button], navigate to ANGLE display using [Cursor Buttons], and select the desired angle.

Note: Works only with discs recorded with multiple angles.

Zoom Function

Enlarge a specific area of the image. Press [ZOOM Button] to cycle through zoom levels (ZOOM X2, ZOOM OFF). Use [Cursor Buttons] to move the zoom area.

EZ VIEW Function

Removes black bars from widescreen movies. Press [EZ VIEW Button] to toggle On/Off.

Note: Not supported for DivX discs.

Bonus Group / Navigating Pages

Bonus Group

Some DVD-Audio discs have a "bonus group" requiring a 4-digit key number. The input screen appears automatically when playing such a disc.

Navigating Pages:

Press the [TUNING/CH Button] during playback to select images from DVD-Audio discs containing still images.

Selecting Audio/Subtitle Language

Audio Language Selection:

1. Press [INFO Button] twice.

2. Use [Cursor Buttons] or numeric buttons to select the desired audio language.

Subtitle Language Selection:

1. Press [INFO Button] twice.

2. Use [Cursor Buttons] to move to the SUBTITLE display.

3. Use [Cursor Buttons] or numeric buttons to select the desired subtitle.

Note: Audio/Subtitle functions may not be available for all discs. You can also use the "Select AUDIO" or "Select SUBTITLE" buttons on the remote.

Playing Media Files using the USB HOST feature

Enjoy media files from USB devices (MP3 player, digital camera, USB memory) via the USB port.

1. Connect the USB device to the USB port.

2. Press the [FUNCTION Button] or [USB Button] to select USB mode. The "USB MENU" screen appears.

Safe USB Removal:

To prevent data loss, perform safe removal: Press [Stop Button] twice, then remove the USB cable.

Skip Forward/Back & Fast Playback:

Use [Skip Buttons] and [Fast Forward/Rewind Buttons] as described for disc playback.

Compatible Devices & Supported Formats:

Supports USB Mass Storage v1.0 devices, MP3 players, digital cameras, USB HDDs, USB Flash Drives, and USB card readers. Check document for supported file formats (Still Picture, Music, Movie).

Note: NTFS file systems are not supported. Some MP3 players or USB devices may not operate correctly. USB extension cables may cause recognition issues.

Moving Directly to a Scene/Song

Use [INFO Button] and [Cursor Buttons] to navigate to specific titles, tracks, or chapters.

Using Disc Menu:

Press [MENU Button], navigate to "DISC MENU" using [Cursor Buttons], and press [ENTER Button]. Select items from the menu.

PBC (Playback Control) Function: For VCDs (version 2.0), PBC ON allows menu navigation; PBC OFF functions like a music CD.

Using the Title Menu:

Press [MENU Button], navigate to "Title Menu" using [Cursor Buttons], and press [ENTER Button] to view movie titles.

Setup

Setting the Language

1. In Stop mode, press [MENU Button].

2. Navigate to "Setup" using [Cursor Buttons] and press [ENTER Button].

3. Select "Language" and press [ENTER Button].

4. Select "OSD Language" and press [ENTER Button].

5. Select the desired language and press [ENTER Button].

Note: To select other languages, use "OTHER" and enter the language code (see page 68). Audio, Subtitle, and Disc Menu languages can also be selected.

Setting TV Screen Type

Adjust the aspect ratio to match your TV (Wide Screen or 4:3).

1. In Stop mode, press [MENU Button].

2. Navigate to "Setup" using [Cursor Buttons] and press [ENTER Button].

3. Select "TV DISPLAY" and press [ENTER Button].

4. Select the desired aspect ratio (WIDE, 4:3LB, 4:3PS) and press [ENTER Button].

Adjusting the TV Aspect Ratio:

• WIDE: For widescreen TVs, displays 16:9 in full-screen.
• 4:3LB (Letterbox): For conventional TVs, displays 16:9 with black bars top/bottom.
• 4:3PS (Pan&Scan): For conventional TVs, displays 16:9 by panning and scanning, showing only the central portion.

Note: 4:3 DVDs can only be viewed in 4:3 ratio.

Setting Parental Controls (Rating Level)

Restrict playback of adult or violent DVDs. 1. Navigate to "Setup" > "PARENTAL" via the [MENU Button] and [Cursor Buttons]. 2. Select the desired rating level and press [ENTER Button].

Setting the Password

Set a password for Parental Controls. 1. Navigate to "Setup" > "PASSWORD" via the [MENU Button] and [Cursor Buttons]. 2. Enter the current password (default "7890"), then the new password and confirm.

Note: If password is forgotten, hold the [Power Button] for 5 seconds in "NO DISC" mode to reset.

Setting the Wallpaper

Set a background wallpaper from a displayed image. 1. During playback, press [PLAY/PAUSE Button] when an image appears. 2. Press [LOGO Button]. "COPY LOGO DATA" is displayed. The unit restarts with the selected wallpaper.

To select saved wallpapers: 1. In Stop mode, navigate to "Setup" > "LOGO" via the [MENU Button] and [Cursor Buttons]. 2. Select a "USER" slot (1, 2, or 3) and press [ENTER Button].

DVD Playback Mode

For DVD-Audio discs containing DVD-Video, set the mode to "DVD VIDEO" to play the video portion.

Setting the Speaker Mode

Adjust speaker output based on your configuration (SMALL/NONE). 1. Navigate to "Setup" > "Audio" > "SPEAKER SETUP" via the [MENU Button] and [Cursor Buttons]. 2. Select speakers (C, SL, SR, L, R) and adjust mode.

Setting the Delay Time

Adjust audio delay for center and rear speakers to match sound arrival times. 1. Navigate to "Setup" > "Audio" > "DELAY TIME" via the [MENU Button] and [Cursor Buttons]. 2. Select speaker and adjust delay time.

Setting the Test Tone

Check speaker connections by playing a test tone. 1. Navigate to "Setup" > "Audio" > "TEST TONE" via the [MENU Button] and [Cursor Buttons]. 2. Press [ENTER Button] to start the tone sequence (L, C, R, SR, SL, SW). Press again to stop.

Setting the DRC (Dynamic Range Compression)

Balances loud and quiet sounds for better movie viewing at low volumes. 1. Navigate to "Setup" > "Audio" > "DRC" via the [MENU Button] and [Cursor Buttons]. 2. Adjust DRC level.

Setting the Audio

Adjust speaker balance and level. Use "SOUND EDIT" for manual adjustments or use the setup screen.

AV SYNC Setup

Adjust audio delay to match video when connected to a digital TV. 1. Navigate to "Setup" > "Audio" > "AV SYNC" via the [MENU Button] and [Cursor Buttons]. 2. Select AV SYNC Delay Time.

Sound Field (DSP)/EQ Function

Simulate acoustic environments or optimize sound for music genres (ROCK, POP, CLASSIC). Available in STEREO mode. 1. Press [DSP/EQ Button]. Select desired mode (POPS, JAZZ, STUDIO, HALL, MOVIE, CHURCH, PASS).

Dolby Pro Logic II Mode

Select desired audio mode (MUSIC, CINEMA, PRO LOGIC, MATRIX, STEREO). Connect external device to AUDIO INPUT jacks.

Dolby Pro Logic II Effect

Adjusts Panorama, C-Width, and Dimension for enhanced sound effects in MUSIC mode.

Radio Operation

Listening to Radio

1. Press [TUNER Button] to select FM band.

2. Tune to desired station using [Tuning Buttons] or [Manual Tuning]. Automatic Tuning searches for stations.

Presetting Stations

1. Tune to a station.

2. Press [TUNER MEMORY Button]. "PRGM" flashes.

3. Select preset number (1-15) using [Cursor Buttons].

4. Press [TUNER MEMORY Button] again to store.

Note: Does not receive AM broadcasts.

Press [MO/ST Button] to select Mono/Stereo for FM listening.

Convenient Functions

Sleep Timer Function

Set the unit to shut off automatically. Press [SLEEP Button] to cycle through time settings (10-150 min, OFF).

Mute Function

Press [MUTE Button] to temporarily silence audio. Press again to restore.

Using Headphones

Connect headphones to the PHONES jack for private listening.

Adjusting Display Brightness

Press [DIMMER Button] to adjust display brightness (DARK to BRIGHT).

Operating a TV with the Remote Control

1. Press [TV Button] to select TV mode.

2. Press [POWER Button] to turn on the TV.

3. Point remote at TV.

4. While holding [POWER Button], enter the TV brand code from the list.

5. Press [POWER Button] again. If the TV turns off, the setting is complete.

TV Brand Code List: A table of brands and corresponding codes is provided for remote control setup.

Note: Remote may not work with all TV brands. Default is Samsung.

Before Calling for Service (Troubleshooting)

Consult the chart for common issues and remedies:

• Disc tray not opening: Check power cord, turn unit off/on.
• Playback not starting: Check DVD region code, disc condition (scratches, deformation), rating level.
• No sound: Check speaker connections, speaker setup, disc damage. For CD/Radio, ensure "PRO LOGIC II" is selected for all speakers. Ensure DVD is 5.1-CH compatible.
• Sound from few speakers: Ensure "PRO LOGIC II" is selected, or check speaker mode settings (C, SL, SR should not be NONE).
• Picture/sound issues, slow tray: Check for condensation (allow unit to warm up).
• Dolby Digital 5.1 CH Surround Sound not produced: Ensure disc has "Dolby Digital 5.1 CH" mark and audio language is set correctly.
• No picture, poor quality, shaking: Check video cables, disc condition, TV power.
• Remote control not working: Check operation range, battery status, correct TV/DVD mode selection.
• Audio/Subtitle issues: Ensure disc contains them and they are compatible.
• Menu screen not appearing: Ensure disc has menus.
• Aspect ratio cannot be changed: 4:3 DVDs can only be viewed in 4:3.
• Unit not working / strange noise: Turn off unit, disconnect power, contact service.
• Password forgotten: Reset unit by holding [Power Button] in "NO DISC" mode for 5 seconds.
• Cannot receive radio broadcast: Check FM antenna connection and signal strength.

Cautions on Handling and Storing Discs

Handle discs carefully to avoid scratches, which can cause playback issues.

• Do not touch the playback side. Hold by edges.
• Do not stick paper or tape on discs.
• Store discs in a cool, ventilated area, in protection jackets, and vertically.
• Do not expose to direct sunlight.
• Do not allow discs to become contaminated with dirt or load cracked/scratched discs.

Cleaning: Wipe gently from the inside to the outside of the disc with a mild detergent diluted in water.

Note: Condensation may form if the player is moved from cold to warm environments. Allow unit to reach room temperature before use.

Language Code List

A list of language codes is provided for setting "Disc Audio", "Disc Subtitle", and "Disc Menu" languages.

USB Host Feature Supported Products & Specifications

USB Host Feature Supported Products

Lists compatible digital cameras, USB flash disks, MP3 players, multi card readers, and USB external HDDs.

Specifications

Samsung Limited Warranty

Samsung Electronics Canada Inc. (SECA) warrants the product against defective material and workmanship for one (1) year for labour and one (1) year for parts (carry-in).

Warranty repairs must be performed by a SECA authorized service center. Proof of purchase (original dated sales receipt) is required.

Exclusions:

Warranty does not cover damage from accident, misuse, improper installation, unauthorized repairs, commercial use, shipping damage, exterior/interior finish, lamps, glass, or customer adjustments explained in the manual. Warranty is void if the serial number is missing or altered. Warranty is valid only for products purchased and used in Canada.