Samsung HT-X250 Digital Home Theater System

Safety Warnings

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER (or BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product.

Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION: Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus. Service is also required if the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Precautions

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the Disc Insert Hole is empty.

This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.

During thunderstorms, disconnect the AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit. The Mains plug is used as a disconnect device and shall stay readily operable at any time.

Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit.

Protect the player from moisture (i.e. vases), and excess heat (e.g. fireplace) or equipment creating strong magnetic or electric fields (i.e. speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only.

Condensation may occur if your player or disc has been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.

Features

• Multi-Disc Playback & FM Tuner: Combines multi-disc playback (DVD-AUDIO, DVD-VIDEO, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, DVD R/RW) with an FM tuner.
• DVD-Audio Compatible: Experience high-quality audio with a 24-bit/192kHz DAC for exceptional sound.
• USB Host Support: Connect and play files from external USB storage devices.
• Dolby Pro Logic II: Multi-channel audio decoding technology.
• DTS (Digital Theater Systems): Full-frequency 5.1 channel sound format.
• TV Screen Saver Function: Samsung logo appears on TV screen after 3 minutes in STOP mode; unit enters power saving mode after 20 minutes in Screen Saver mode.
• Power Saving Function: Automatically shuts off after 20 minutes in Stop mode.
• Customized TV Screen Display: Set favorite JPEG images as background wallpaper.
• HDMI: Transmits DVD video and audio signals simultaneously for a clearer picture.
• AV SYNC Function: Adjusts audio delay to compensate for video lag on digital TVs.
• Anynet+(HDMI-CEC) Function: Operate the unit with a Samsung TV remote control via HDMI connection (requires compatible Samsung TV).

Notes on Discs

DVD players and discs are coded by region. Region numbers must match for playback.

Playable Discs

Do not use the following types of disc: LD, CD-G, CD-I, CD-ROM, and DVD-ROM discs cannot be played. A "<WRONG DISC FORMAT>" message will appear.

DVD discs purchased abroad may not play. A "<CAN'T PLAY THIS DISC PLEASE, CHECK REGION CODE>" message will appear.

Copy Protection

Many DVD discs are copy-protected. Connect the DVD player directly to your TV, not to a VCR, to avoid distorted pictures from copy-protected DVDs.

This product incorporates copyright protection technology protected by U.S. patents and intellectual property rights owned by Macrovision Corporation. Use is intended for home and limited viewing uses only.

Disc Recording Format

This product does not support Secure (DRM) Media files.

CD-R Discs

• Compatibility may vary based on the recording device and disc condition.
• Use 650MB/74 minute CD-R discs. Do not use discs over 700MB/80 minute.
• Some CD-RW media may not be playable.
• Only "closed" CD-Rs can be fully played.

CD-R MP3 Discs

• Only ISO 9660 or Joliet format.
• MP3 file names: 8 characters or less, no blank spaces or special characters.
• Use discs recorded with a data rate greater than 128Kbps.
• Only files with ".mp3" extension.
• Only consecutively written multisession discs.
• Variable Bit Rate (VBR) files may skip.
• Max 500 tracks, 300 folders per CD.

CD-R JPEG Discs

• Only files with ".jpg" extension.
• Only ISO 9660 or Joliet format.
• JPEG file names: 8 characters or less, no blank spaces or special characters.
• Only consecutively written multisession discs.
• Max 9,999 images per CD.
• Kodak/Fuji Picture CDs: only JPEG files in the picture folder.

DVD R/RW, CD-R/RW DivX Discs

• Only supports formats authorized by DivX Networks, Inc. User-created DivX files might not play.
• Software updates for incompatible formats are not supported (e.g., QPEL, GMC, resolution higher than 800 x 600 pixels).
• Sections with high frame rates might not play.
• Visit www.divxnetworks.net for more information.

Description

Front Panel

1. Power [power-symbol] button: Turns the unit on/off.

2. Disc Insert Hole: For inserting discs.

3. Display: Shows status information.

4. Eject button: Opens/closes the disc tray.

5. Function button: Selects input source.

6. Tuning Down & Skip [skip-backward-symbol] button: Tunes down radio stations or skips to the previous track/chapter.

7. Stop [stop-symbol] button: Stops playback.

8. Play/Pause [play-pause-symbol] button: Starts or pauses playback.

9. Tuning Up & Skip [skip-forward-symbol] button: Tunes up radio stations or skips to the next track/chapter.

10. Volume Control button: Adjusts the volume.

Rear Panel

1. 5.1 Channel Speaker Output Connectors: For connecting surround speakers.

2. Component Video Output Jacks (Y, Pb, Pr): For connecting to TVs with component inputs.

3. Video Output Jack (VIDEO OUT): For connecting to TV's composite video input.

4. External Digital Optical Input Jack: For connecting digital audio sources.

5. HDMI OUT Jack: For digital audio/video output.

6. TX Card Connection (WIRELESS): For optional wireless rear speaker module.

7. AUX IN 2 Jacks: For analog audio input.

8. FM 75 COAXIAL Jack: For connecting the FM antenna.

9. Stand: For supporting the unit.

10. Cable Tie: For organizing cables.

11. Stand Fix Hole: For securing the stand.

12. Cooling Fan: For ventilation.

Side Panel

1. Headphone Jack: For connecting headphones.

2. AUX IN 1 Jack: For analog audio input.

3. USB Port: For connecting USB storage devices.

Accessories

• Remote Control (AH59-01778P)
• Video Cable (AH39-40001V)
• FM Antenna (AH42-00017A)
• User's Manual (AH68-01943R)

Remote Control

1. DVD RECEIVER button: Selects DVD receiver mode.

2. TV button: Selects TV mode for remote control.

3. TV/VIDEO button: Switches TV input source.

4. POWER button: Turns the unit or TV on/off.

5. Number (0~9) buttons: For direct selection.

6. REMAIN button: Displays remaining time.

7. STEP button: Advances frame by frame.

8. Tuning Preset/CD Skip buttons: Selects preset radio stations or skips tracks/chapters.

9. VOLUME button: Adjusts volume.

10. MENU button: Accesses setup menus.

11. AUDIO button: Selects audio track.

12. PL II EFFECT button: Adjusts Dolby Pro Logic II effects.

13. PL II MODE button: Selects Dolby Pro Logic II mode.

14. TUNER MEMORY, SD/HD button: Stores radio presets or selects definition.

15. ZOOM button: Zooms the picture.

16. SLEEP button: Sets sleep timer.

17. SLOW, MO/ST button: Selects slow playback speed or Mono/Stereo for radio.

18. EZ VIEW button: Adjusts aspect ratio for widescreen viewing.

19. DVD, TUNER, USB, AUX buttons: Selects input source.

20. EJECT button: Opens/closes disc tray.

21. DIMMER button: Adjusts display brightness.

22. CANCEL button: Cancels operations.

23. REPEAT button: Sets repeat playback mode.

24. PLAY/PAUSE [play-pause-symbol], STOP [stop-symbol] buttons: Controls playback.

25. SEARCH buttons [skip-backward-symbol], [skip-forward-symbol]: Fast forwards or rewinds.

26. TUNING/CH button: Tunes radio stations or changes channels.

27. MUTE button: Mutes audio.

28. RETURN button: Returns to previous menu.

29. Cursor/ENTER [arrow-up-symbol], [arrow-down-symbol], [arrow-left-symbol], [arrow-right-symbol], [enter-symbol] buttons: Navigates menus and confirms selections.

30. SUBTITLE button: Selects subtitle track.

31. EXIT button: Exits menus.

32. DSP/EQ button: Selects sound field/equalizer modes.

33. INFO button: Displays disc information.

34. SOUND EDIT button: Accesses manual audio adjustments.

35. DIGEST button: Displays multiple JPEG images at once.

36. TEST TONE button: Outputs test tone for speaker setup.

37. SLIDE MODE button: Controls JPEG slide show transitions.

38. LOGO button: Sets custom wallpaper.

Remote Batteries: Insert two 1.5V AAA batteries, observing polarity.

Operation Range: Up to 23 feet (7 meters) in a straight line, up to 30° horizontal angle.

Connections

Before moving or installing, turn off power and disconnect the power cord.

Connecting the Speakers

Speaker Placement:

• Front Speakers (L/R): Place in front of listening position, facing inwards. Tweeters at ear height.
• Center Speaker (C): Install at same height as front speakers, or directly over/under TV.
• Rear Speakers (SL/SR): Place behind listening position, facing each other if space is limited. Position 60-90cm (2-3 feet) above ear level, facing slightly downward.
• Subwoofer (SW): Position is flexible.

Listening Position: Approximately 2.5 to 3 times the TV screen size away from the TV.

Connecting Speaker Wires: Press terminal tab, insert black wire into black terminal () and red wire into red (+) terminal. Connect plugs to the back of the Home Theater, matching colors.

Important Notes: Keep children away from speakers. Ensure correct polarity. Keep subwoofer out of reach of children. Avoid placing speakers near TV to prevent screen color distortion.

Connecting the Optional Wireless Receiving Amplifier

Requires optional wireless receiving module (SWA-3000) and TX card.

1. Connect Front, Center, and Subwoofer speakers to the DVD Player.
2. Insert the TX card into the TX Card Connection (WIRELESS) on the back of the main unit (slanted side down, with unit off).
3. Connect left and right rear speakers to the wireless receiving module.
4. Plug the wireless receiving module's power cord into a wall outlet and switch it ON.

Resetting the Wireless Receiving Module: Reset if communication fails or the Link indicator does not light up. With the main unit off, press and hold the REMAIN button on the remote for 5 seconds. The STANDBY LED on the wireless receiver blinks. With the wireless receiver on, press the RESET button on its back using a ballpoint pen. The STANDBY LED blinks twice. Turn on the main unit. The LINK LED on the wireless receiver lights up, indicating reset completion. Repeat if necessary.

Notes: Do not insert non-TX cards. Insert TX card correctly. Sound is not output from main unit rear speaker connectors if TX card is inserted. Keep wireless receiver away from water. Ensure clear space around the receiver. Wireless rear speakers only output sound in DVD 5.1-CH or Dolby Pro Logic II modes. Avoid placing the receiver too close to the main unit or devices using the same frequency (2.4GHz) to prevent interference. Transmission distance is about 33 feet, affected by obstructions like walls.

Installing the Main Unit

Method 1: Installing the Stand (Player Lays Flat)

1. Turn the stand counter-clockwise and pull apart to separate from the player.
2. Hold the player and stand, turn the right side of the stand upward to a slight slant.
3. Insert the 2 stand anchors into the holes on the back of the DVD Player.
4. Turn the right side of the stand clockwise to fix it to the back of the DVD Player.

Method 2: Installing the Stand (Player Stands Up)

1. Turn the stand in the direction of the arrow and pull apart.
2. Lift the right side of the stand to a slight slant.
3. Insert the 2 stand anchors into the holes on the bottom of the DVD Player.
4. Turn the right side of the stand clockwise to fix it to the bottom of the DVD Player.

Arranging the Cables: Use the cable tie to keep cables together.

Preparation: Disconnect AC power cord before installation. Connect cables before installation.

Connecting the Video Out to your TV

METHOD 1: HDMI (Best Quality) Connect HDMI OUT on the player to HDMI IN on your TV (cable not supplied).

METHOD 2: Component Video (Better Quality) Connect Component Video Output (Y, Pb, Pr) on the player to Component Video Input on your TV (cable not supplied).

METHOD 3: Composite Video (Good Quality) Connect the supplied Video cable from VIDEO OUT on the player to VIDEO IN on your TV.

Notes: This product operates in Interlace scan mode (480i Only) for Component Output. Set the TV's video input source to match the player's output. HDMI connection with a Samsung TV may enable control via the TV remote (Anynet+). Look for the logo on your TV.

HDMI Function

Resolution Selection: In Stop mode, press and hold the SD/HD button on the remote. Resolutions: 480p, 720p, 1080i. SD is 480p, HD is 720p/1080i.

Why use HDMI: Transmits DVD video and audio digitally without analog conversion for sharper pictures.

Notes: If TV does not support configured resolution, picture may be distorted. Composite and component signals are not output when HDMI is connected.

Using Anynet+(HDMI-CEC)

Enables control of Samsung devices with your Samsung TV's remote via HDMI. Requires compatible Samsung TV.

1. Connect the Home Theater to a Samsung TV with an HDMI cable.
2. Set the Anynet+ function to on your TV.

You can operate the Home Theater using the TV remote (buttons like Power, Volume, Channel, Menu, Enter, etc.).

If you select TV: Set Anynet+ to . allows listening through the Home Theater; through the TV.

If you select THEATER: Select <THEATER to connector>. switches to DIGITAL IN. <THEATER Menu> accesses the Home Theater menu. <THEATER Operation> displays playback info. <Receiver: On/Off> controls audio output.

Notes: A digital optical cable may be needed to hear TV sound through the Home Theater when selecting View TV. Turning off the main unit may turn off the TV. Anynet+ works only in DVD mode.

Connecting Audio from External Components

AUX1 (Side Panel): Connect analog audio sources (e.g., MP3 Player) using an audio cable. Select using the AUX button or FUNCTION button.

AUX2 (Rear Panel): Connect analog audio sources (e.g., VCR) using an audio cable. Match connector colors. Select using the AUX button or FUNCTION button.

OPTICAL (Rear Panel): Connect digital audio sources (e.g., Cable Box) using an optical cable. Select <D.IN> using the AUX button or FUNCTION button.

Note: You can connect the Video Output of a VCR to the TV and the Audio Output of the VCR to this product.

Connecting the FM Antenna

Connect the supplied FM antenna to the FM 75 COAXIAL Jack. Position the antenna for good reception. This unit does not receive AM broadcasts.

Cooling Fan: Ensures proper ventilation to prevent overheating. Do not obstruct fan or ventilation holes.

Operation

Before Reading the User's Manual

Icons used in manual:

• DVD (DVD): Function available with DVD or DVD-R/RW discs recorded and finalized in Video Mode.
• CD: Function available with data CD (CD-R or CD-RW).
• MP3: Function available with CD-R/-RW discs.
• JPEG: Function available with CD-R/-RW discs.
• DivX: Function available with MPEG4 discs (DVD R/RW, CD-R or CD-RW).
• CAUTION: Indicates where a function does not operate or settings may be cancelled.
• NOTE: Tips or instructions to help functions operate.

Notes: Instructions marked "DVD (DVD)" apply to DVD-VIDEO, DVD-AUDIO, and DVD-R/-RW discs recorded in Video Mode and finalized. If a DVD-R/-RW disc is not recorded properly in DVD Video format, it will not be playable. Disc screens may vary.

Before Using Your Home Theater

Operating a Samsung TV and Home Theater with the HT-X250 Remote:

1. Plug in the main unit's power cord.
2. Press the TV button to set the remote to TV mode.
3. Press the POWER button to turn on your Samsung TV.
4. Press the TV/VIDEO button to select VIDEO mode on your TV.
5. Press the DVD RECEIVER button to switch to DVD RECEIVER mode to operate the DVD Home Theater.
6. Press the FUNCTION button on the main unit or the DVD button on the remote to enable DVD playback.

Disc Playback

Loading a disc: Insert a disc vertically into the Disc Insert Hole with the label side facing forward. Playback starts automatically.

Ejecting a disc: Press the EJECT button.

Stopping playback: Press the STOP [stop-symbol] button. Pressing once stores the stop position for resume playback (DVDs only). Pressing twice stops playback completely.

Pausing playback: Press the PLAY/PAUSE [play-pause-symbol] button during playback. Press again to resume.

Note: Pirated discs may not run due to CSS (Content Scrambling System) protection.

MP3/WMA-CD Playback

Plays Data CDs (CD-R, CD-RW) encoded in MP3/WMA format. WMA-DRM files are not supported.

1. Load the MP3 disc. The MP3/WMA menu screen appears, and playback starts.
2. In Stop mode, use Cursor buttons to select an album, then press ENTER. Use Cursor buttons to select a track.
3. To change albums, repeat step 2.
4. Press STOP [stop-symbol] to stop playback.

Note: Menu appearance depends on the disc and recording mode. Some CDs may not play.

File Icon Selection: In Stop mode, use Cursor buttons to select Music, Image, or Movie file icons to filter playback.

JPEG File Playback

Plays JPEG files stored on a CD, such as those from digital cameras.

Slide Mode: Playback starts automatically, displaying each image for 5 seconds. Press SLIDE MODE to cycle through SLIDE SHOW MODE (1~5), RANDOM, and NONE.

Navigation: Use [skip-forward-symbol] to skip to the next slide. Use [skip-backward-symbol] to move backward or forward.

Digest Function: Press DIGEST during playback to view 9 JPEG images on screen at once. Use Cursor buttons to select an image for detailed viewing.

Rotate/Flip Function: During playback, use Cursor buttons to Flip Vertically, Rotate 90° Counterclockwise, Rotate 90° Clockwise, or Flip Horizontally.

Notes: Maximum supported resolutions are 5120 x 3480 (standard JPEG) and 2048 x 1536 (progressive JPEG). HDMI output resolution of 720p/1080i automatically converts to 480p for JPEG playback.

DivX Playback

Functions for DivX disc playback.

Skip Forward/Back: Press [skip-forward-symbol] to go to the next file, [skip-backward-symbol] to go to the previous file (if multiple files exist).

Fast Playback: Press [skip-forward-symbol] or [skip-backward-symbol] during playback to cycle through speeds: 2x, 4x, 8x, 32x, Normal.

5 Minute Skip: Press Cursor [arrow-right-symbol] to skip 5 minutes forward, Cursor [arrow-left-symbol] to skip 5 minutes back.

Zoom Function: Press ZOOM button. Toggles between and . Use Cursor buttons to move the enlarged area. DivX files zoom up to X2.

Audio Display: Press AUDIO button to toggle between available audio tracks.

Subtitle Display: Press SUBTITLE button to toggle between available subtitle tracks or turn them OFF. If multiple subtitle files exist, select the desired language in Stop mode using Cursor buttons and ENTER.

DivX (Digital Internet Video eXpress) Details:

• Supported Formats: Video: AVI (DivX3.11~DivX5.1, XviD V1/V2/V3/V7), WMV. Audio: MP3 (80~384kbps), WMA (56~128kbps), AC3 (128~384kbps), DTS (1.5Mbps). Sampling Frequency: 44.1kHz (MP3, WMA, AC3), 44.1/48kHz (AC3), 44.1khz (DTS).
• Notes: DTS audio format supports up to 6Mbps. Aspect Ratio: Supports up to 800x600 pixels (16:9). Resolutions higher than 800 will not be supported. Playback may shake on discs with sampling frequency > 48kHz or > 320kbps.
• Caption Function: Save caption file (*.smi) with the same name as the DivX media file (*.avi) in the same folder. Max file name length: 60 alphanumeric or 30 East Asian characters.

Using the Playback Function

Displaying Disc Information

Press the INFO button. The display cycles through various information like Title, Chapter, Track, Elapsed Time, Repeat Mode, Audio Language, Subtitle Language, Angle, Stereo, Dolby Digital, etc. Press INFO again to hide the display.

A symbol [symbol-not-possible] appears if an operation is not possible with the current disc.

Checking the Remaining Time

Press the REMAIN button to check total and remaining time for Title, Chapter, Group, or Track.

Fast Playback

Press the [skip-forward-symbol] or [skip-backward-symbol] button during playback to cycle through speeds: 2x, 4x, 8x, 32x, Normal. Sound is heard only at 2x speed for CD/MP3-CD.

Slow Playback

Press the SLOW button during playback to cycle through speeds: 1/2, 1/4, 1/8, Normal. No sound is heard during slow playback. Reverse slow playback is not supported for DivX.

Skipping Scenes/Songs

Press the [skip-forward-symbol] or [skip-backward-symbol] button during playback to play the previous or next chapter, track, or directory (file).

Repeat Playback

Press the REPEAT button to cycle through repeat modes:

• DVD-VIDEO/DVD-AUDIO: CHAPTER, TITLE, TRACK, GROUP, OFF.
• CD/MP3/JPEG/DivX: TRACK, DISC, RANDOM, DIR, OFF.

To Select a Repeat Playback Mode in the Disc Information Screen: Press INFO twice, navigate to REPEAT PLAYBACK display using Cursor buttons, select mode, and press ENTER.

Note: Repeat Play cannot be selected from the information display for DivX, MP3, and JPEG discs.

A-B Repeat Playback (DVD)

Repeatedly play a designated section. Press INFO twice, navigate to REPEAT PLAYBACK, select <A-> and press ENTER at the start of the segment. Press ENTER again at the end of the segment. The specified segment plays repeatedly. Select OFF to return to normal playback.

Note: A-B Repeat does not operate with DivX, MP3, or JPEG discs.

Step Function (DVD, DivX)

Press the STEP button during playback to advance the picture one frame at a time. No sound is heard.

Angle Function (DVD)

Allows viewing scenes in different angles. Press INFO, navigate to ANGLE display, and use Cursor or numeric buttons to select the desired angle (e.g., 1/3, 2/3, 3/3). Works only with discs recorded with multiple angles.

Zoom (Screen Enlarge) Function (DVD, DivX)

Press the ZOOM button. Toggles between , , , . Use Cursor buttons to move the enlarged area. For DivX, zoom is up to X2.

EZ VIEW Function (DVD)

Press the EZ VIEW button to toggle between On and Off. Removes black bars at the top and bottom of widescreen movies. May not work if DVD has built-in aspect ratio or multi-camera format. Not supported for DivX discs.

Bonus Group (DVD-AUDIO)

Some DVD-Audio discs have a bonus group requiring a 4-digit key number. Enter the key number when prompted. The number must be re-entered if the disc is ejected or power is cycled.

Navigating Pages (DVD-AUDIO)

Press the [skip-forward-symbol] or [skip-backward-symbol] button during playback to select desired images from DVD-Audio discs containing still images.

Audio Language Selection Function (DVD)

Press INFO twice, then use Cursor or numeric buttons to select the desired audio language (e.g., ENGLISH, SPANISH, FRENCH).

Subtitle Language Selection Function (DVD)

Press INFO twice, navigate to SUBTITLE display, and use Cursor or numeric buttons to select the desired subtitle language (e.g., EN, SP, FR, OFF).

Note: AUDIO and SUBTITLE buttons on the remote can also be used. Functions may not be available on all discs.

Moving Directly to a Scene/Song

DVD: Press INFO, use Cursor or numeric buttons to select title/track, press ENTER. Use Cursor buttons to move to Chapter display, select chapter, press ENTER. Use Cursor buttons to move to time display, enter desired time, press ENTER.

CD/MP3/JPEG: Press numeric buttons to select file. For folders, press STOP, then use Cursor buttons.

Note: You can also use the [search-symbol] buttons. Functionality may vary by disc.

Using the Disc Menu (DVD)

Press MENU in Stop mode, navigate to <DISC MENU> and press ENTER. Use Cursor buttons to select items (audio language, subtitle, profile, etc.) and press ENTER. Press EXIT to leave.

Note: Menu content varies by disc. Message "This menu is not supported" appears if not supported.

Using the Title Menu (DVD)

Press MENU in Stop mode, navigate to <Title Menu> and press ENTER. The title menu appears. Press EXIT to leave.

Playing Media Files using the USB Host Feature

Enjoy media files (pictures, movies, music) from USB storage devices via the USB port.

1. Connect the USB device to the USB port on the side of the unit.
2. Press the FUNCTION button or the USB button on the remote to select USB mode. The USB MENU screen appears on the TV.
3. Press STOP [stop-symbol] to stop playback.

Safe USB Removal: Press STOP [stop-symbol] twice. "REMOVE USB" is displayed. Then remove the USB cable.

Notes: To listen to music files in 5.1 channel surround sound, set Dolby Pro Logic II mode to Matrix (see page 53).

Skip Forward/Back (USB)

Press the [skip-forward-symbol] button for the next file, [skip-backward-symbol] for the previous file.

Fast Playback (USB)

Press the [skip-forward-symbol] or [skip-backward-symbol] button to cycle through speeds: 2x, 4x, 8x, 32x, Normal.

Compatible Devices

Supports USB devices compatible with USB Mass Storage v1.0 (operate as removable discs in Windows without drivers). Includes MP3 Players, Digital Cameras, USB HDDs, USB Flash Drives, and USB Card Readers. USB extension cables may cause issues. USB HDDs require auxiliary power.

Supported Formats

Notes: CBI protocol is not supported. PTP protocol cameras or those requiring driver installation are not supported. NTFS file system is not supported (FAT 16/32 only). Some MP3 players may not operate due to sector size. Devices using manufacturer-specific transfer programs or Janus-enabled MTP devices are not supported. Not all USB devices are supported.

Settings

Setting the Language

OSD (On-Screen Display) language is English by default.

Options: OSD LANGUAGE, AUDIO, SUBTITLE, DISC MENU. For OTHER languages, enter the language code (see page 63).

Procedure: In Stop mode, press MENU, navigate to <Setup>, select <LANGUAGE>, choose <OSD LANGUAGE>, select desired language, press ENTER.

Notes: If selected language is not on the disc, menu language will not change. AUDIO, SUBTITLE, and DISC MENU languages depend on disc content.

Setting TV Screen type

Adjusts the TV's aspect ratio to match your screen.

Options:

• 4:3PS (Pan&Scan): For conventional TVs, displays the central portion of a 16:9 picture.
• 4:3LB (Letterbox): For conventional TVs, displays 16:9 picture with black bars at the top and bottom.
• WIDE/HDTV: For widescreen TVs, displays 16:9 picture in full screen.

Procedure: In Stop mode, press MENU, navigate to <Setup>, select <TV DISPLAY>, choose desired option, press ENTER.

Note: 4:3 DVDs can only be seen in 4:3 ratio. HDMI operation automatically converts to Wide mode.

Setting Parental Controls (Rating Level)

Restricts playback of adult or violent DVDs. Works only if the DVD disc contains rating information.

Procedure: In Stop mode, press MENU, navigate to <Setup>, select <PARENTAL>, choose desired rating level, enter password (default "7890"), press ENTER.

Higher levels restrict more mature content.

Setting the Password

Set or change the password for Parental Controls.

Procedure: In Stop mode, press MENU, navigate to <Setup>, select <PASSWORD>, enter old password, new password, confirm new password, press ENTER.

Password Reset: If forgotten, while "NO DISC" is displayed, hold STOP [stop-symbol] button for over 5 seconds. "INITIALIZE" appears, and all settings return to default.

Setting the Wallpaper (DVD, JPEG)

Set a favorite image as background wallpaper.

To Set: During playback, press PLAY/PAUSE [play-pause-symbol] when a desired image appears. Press LOGO button. Power cycles, and the selected wallpaper is displayed. Up to 3 wallpapers can be set.

To Select Wallpaper: In Stop mode, press MENU, navigate to <Setup>, select <LOGO>. Choose <ORIGINAL> (Samsung Logo) or <USER> (your saved wallpaper) and press ENTER.

Note: This function does not work with HDMI output at 720p or 1080i.

DVD Playback Mode

Switch between DVD VIDEO and DVD AUDIO playback for discs containing both formats.

Procedure: Press EJECT, then MENU. Navigate to <Setup>, select <DVD TYPE>. Choose <DVD VIDEO> or <DVD AUDIO> and press ENTER. Default is DVD AUDIO. Powering off switches to DVD AUDIO.

DivX (R) Registration

Use the Registration code to register this player with the DivX video on demand format. Visit www.divx.com/vod for details.

Setting the Speaker Mode

Adjusts signal output and frequency response based on speaker configuration.

Procedure: In Stop mode, press MENU, navigate to <Audio>, select <SPEAKER SETUP>. Use Cursor buttons to move to desired speaker (C, SL, SR, L, R) and press ENTER. Modes: SMALL (for connected speakers) or NONE (for no speaker).

Note: Mode may vary with PRO LOGIC and STEREO settings.

Setting the Delay Time

Adjusts audio signal delay for center and rear speakers if they are not equidistant from the listening position.

Procedure: In Stop mode, press MENU, navigate to <Audio>, select <DELAY TIME>. Use Cursor buttons to move to desired speaker (C, SL, SR) and press ENTER. Use Cursor buttons to set delay time (C: 00-05mSEC, SL/SR: 00-15mSEC).

Speaker Delay Time Setup: Tables provided show delay times based on distance differences (Df, Dc, Ds) for Center and Surround speakers to achieve optimal 5.1CH surround sound.

Notes: Delay time may differ for Pro Logic II modes. AC-3 and DTS delay adjustable 00-15mSEC. Center channel adjustable only on 5.1 channel discs.

Setting the Test Tone

Checks speaker connections. The test tone plays through L, C, R, SR, SL, SW in order. Press ENTER again to stop.

Alternative Method: Press the TEST TONE button on the remote. Works in Stop mode for DVD/CD. Not available if HDMI AUDIO is ON.

Setting the Audio (SOUND EDIT)

Adjusts balance and level for each speaker.

Procedure: In Stop mode, press MENU, navigate to <Audio>, select <SOUND EDIT>. Use Cursor buttons to select item and adjust settings.

Manual Adjustment: Press SOUND EDIT button, then use Cursor buttons to adjust Front/Rear balance (0, -6, OFF) and Center/Rear/Subwoofer speaker levels (+6dB to -6dB).

Setting the DRC (Dynamic Range Compression)

Balances loud and quiet sounds, useful for watching movies at low volume at night.

Procedure: In Stop mode, press MENU, navigate to <Audio>, select <DRC>. Use Cursor buttons to adjust DRC effect (greater effect with [arrow-right-symbol], smaller with [arrow-left-symbol]).

Setting the AV SYNC

Adjusts audio delay time to match video on digital TVs if video appears slower than audio.

Procedure: In Stop mode, press MENU, navigate to <Audio>, select <AV-SYNC>. Use Cursor buttons to select delay time (0 ms to 300 ms) and press ENTER.

Setting the HDMI Audio

Toggles HDMI audio signal transmission ON/OFF.

Procedure: In Stop mode, press MENU, navigate to <Audio>, select <HDMI AUDIO>. Choose <ON> or <OFF> and press ENTER.

Notes: ON: Audio transmitted via HDMI, output through TV speakers (down-mixed to 2ch). OFF: Audio transmitted via HDMI, output through home theater speakers only. Default is OFF.

Sound Field (DSP)/EQ Function

DSP modes simulate acoustic environments. EQ selects ROCK, POP, or CLASSIC to optimize sound.

Procedure: Press DSP/EQ button. Cycles through POP, JAZZ, ROCK, STUDIO, CLUB, HALL, MOVIE, CHURCH, PASS. DSP/EQ is available only in STEREO mode. Press PL II mode button to show STEREO on display.

Notes: Works with CDs, MP3-CDs, 2-channel DVD-Audio, DivX, and Dolby Digital discs. Does not work in multi-channel mode.

Dolby Pro Logic II Mode

Select desired Dolby Pro Logic II audio mode.

Procedure: Press PL II MODE button. Cycles through MUSIC, CINEMA, PRO LOGIC, MATRIX, STEREO.

Notes: Connect external device to AUDIO INPUT jacks (L and R) for surround sound. If only one input is used, surround sound is not possible. Pro Logic II does not work in multi-channel mode.

Dolby Pro Logic II Effect

Works only in Dolby Pro Logic MUSIC mode.

Procedure: Press PL II MODE to select <MUSIC>. Press PL II EFFECT to select <P> (PANORAMA) and use Cursor buttons (0 or 1) for wraparound effect. Press PL II EFFECT to select <C> (CENTER WIDTH) and use Cursor buttons (0-7) to set center image width. Press PL II EFFECT to select <D> (DIMENSION) and use Cursor buttons (0-6) to adjust sound field from front or rear.

Miscellaneous

Listening to Radio

Tuning: Press TUNER button to select FM band. Use [tuning-up-symbol]/[tuning-down-symbol] for manual tuning or to search for stations. Use Tuning Preset/CD Skip buttons to select preset stations.

Main Unit Tuning: Press FUNCTION to select FM. Use STOP [stop-symbol] to select PRESET or MANUAL. Use [tuning-symbol] buttons for tuning.

Mono/Stereo: Press MO/ST button to switch between STEREO and MONO. Select MONO in poor reception areas.

Note: Unit does not receive AM broadcasts.

Presetting Stations

Procedure: Select FM band. Tune to desired station. Press TUNER MEMORY. Preset number flashes. Use [tuning-symbol] button to select preset number (1-15). Press TUNER MEMORY again before the number disappears.

To tune to a preset station: Use the [tuning-symbol] button on the remote.

Convenient Functions

• Sleep Timer: Press SLEEP button to cycle through OFF, 10, 20, 30, 60, 90, 120, 150 minutes. Press again to confirm or change. Press until OFF to cancel.
• Display Brightness: Press DIMMER button to adjust front display brightness.
• Mute Function: Press MUTE button to mute audio. Press again to restore sound.

Operating a TV with the Remote Control

Procedure: Press TV button. Press POWER button. While holding POWER, enter the 2 or 3-digit code for your TV brand (see list below). If TV turns off, setting is complete. You can use TV POWER, VOLUME, CHANNEL, and Number buttons.

Note: Remote may not work on all TV brands or support all functions.

TV Brand Code List

A table listing TV brands and their corresponding remote control codes is provided.

Troubleshooting

Symptom: Cannot eject disc.

Check/Remedy: Ensure power cord is plugged in. Turn power off/on. Check DVD region number. Do not use CD-ROM/DVD-ROM. Check rating level. Check disc for deformation or scratches. Wipe disc clean.

Symptom: Playback does not start / Playback does not start immediately.

Check/Remedy: Check power cord. Turn power off/on. Check DVD region number. Do not use CD-ROM/DVD-ROM. Check rating level. Check disc for deformation or scratches. Wipe disc clean.

Symptom: Sound is not produced.

Check/Remedy: No sound during fast/slow/step playback. Check speaker connections and setup. Check if disc is damaged.

Symptom: Sound only from a few speakers.

Check/Remedy: For CD/Radio, sound is front speakers only; select "PRO LOGIC II" to use all six speakers. Ensure DVD disc is 5.1-CH compatible. If C, SL, SR are set to NONE in speaker mode, no sound from those speakers; set to SMALL.

Symptom: Dolby Digital 5.1 CH Surround Sound is not produced.

Check/Remedy: Check for "Dolby Digital 5.1 CH" mark on disc. Ensure audio language is set to DOLBY DIGITAL 5.1-CH in information display.

Symptom: Remote control does not work.

Check/Remedy: Check operation range. Check batteries. Ensure correct mode (TV/DVD) is selected.

Symptom: Disc rotates but no picture.

Check/Remedy: Ensure TV is on. Check video cable connections. Check disc for dirt or damage. Poorly manufactured discs may not play.

Symptom: Picture quality is poor, picture is shaking.

Check/Remedy: Check disc for dirt or damage. Poorly manufactured discs may not play.

Symptom: Audio language and subtitles do not work.

Check/Remedy: These functions only work if the disc contains them.

Symptom: Menu screen does not appear.

Check/Remedy: Ensure the disc contains menus.

Symptom: Aspect ratio cannot be changed.

Check/Remedy: 16:9 DVDs can be played in WIDE, LETTER BOX, or PAN SCAN modes. 4:3 DVDs can only be seen in 4:3 ratio. Refer to DVD disc jacket.

Symptom: Main unit not working (power out, strange noise).

Check/Remedy: Turn off power and hold STOP [stop-symbol] button on main unit for over 5 seconds. "INITIALIZE" appears, resetting all settings.

Symptom: Password for rating level forgotten.

Check/Remedy: While "NO DISC" is displayed, hold STOP [stop-symbol] button for over 5 seconds. "INITIALIZE" appears, resetting all settings.

Symptom: Can't receive radio broadcast.

Check/Remedy: Ensure antenna is connected properly. Install external FM antenna in an area with good reception if signal is weak.

Symptom: While listening to TV audio through main unit, no sound is heard.

Check/Remedy: If EJECT button is pressed while listening via D.IN or AUX, DVD functions turn on and stop TV audio.

Cautions on Handling and Storing Discs

Small scratches can reduce quality or cause skipping. Handle discs carefully.

Handling discs: Do not touch the playback side. Hold by the edges. Do not stick paper or tape on the disc.

Disc Storage: Keep in a cool, ventilated area, away from direct sunlight. Store vertically in a clean protection jacket. Do not load cracked or scratched discs.

Cleaning: If discs get fingerprints or dirt, clean with mild detergent diluted in water and wipe with a soft cloth from inside to outside. If condensation forms, remove the disc and let the player stand for 1-2 hours with power on.

Language Code List

Enter appropriate code numbers for Disc Audio, Disc Subtitle, and Disc Menu settings (see page 42).

A table listing language codes is provided.

USB Host Feature Supported Products

Lists compatible Digital Cameras, USB Flash Discs, MP3 Players, and USB External HDDs by company and product name.

Specifications

General: Power Requirements (AC 120V ~ 60Hz), Power Consumption (60W), Weight (11.5 lbs), Dimensions (18 x 12.4 x 7.5 in), Operating Temp/Humidity.

FM Tuner: Usable Sensitivity, S/N Ratio, Distortion.

Video Output: Composite Video, Component Video, HDMI.

Amplifier: Speaker output power (100W x 2 for Front, 100W for Center, 100W x 2 for Rear, 100W for Subwoofer), Frequency range, S/N Ratio, Channel separation, Input sensitivity.

Speaker: System (5.1ch), Impedance, Frequency range, Output sound pressure level, Rated input, Maximum input, Dimensions, Weights.

Warranty & Contact

Contact SAMSUNG customer care center for any questions or comments regarding Samsung products. Regional contact information and website are provided.