Kit Contents:
- Front bumper with bumper mount, D-Rings, and fairlead
Tools Required:
- 2mm hex wrench
Installation Steps:
Step 1a: 1979 Ford Bronco - Remove Existing Bumper
This step illustrates the removal of the original front bumper from the 1979 Ford Bronco chassis. The diagram shows the bumper assembly, mounting points, and arrows indicating the fasteners or clips to be released.
Remove the existing front bumper from the chassis.
Step 1b: 1979 Chevrolet Blazer - Remove Existing Bumper
This step illustrates the removal of the original front bumper from the 1979 Chevrolet Blazer chassis. Similar to step 1a, it shows the bumper assembly and points of detachment with directional arrows.
Remove the existing front bumper from the chassis.
Step 2: Install New Front Bumper
Install the new front bumper on the chassis.
Your new front bumper is designed to work with the 8088 LED light bar (sold separately). Install it on the bumper as shown below. The 8028 LED lighting module (also sold separately) is required to provide power to the light bar.
The diagram shows the installation of the new front bumper onto the TRX-4 chassis. It depicts the new bumper assembly, mounting brackets, and fasteners. Optional accessories are highlighted: a winch kit (part #8855, sold separately) and an LED lighting module (8028, sold separately) for the 8088 LED light bar. Specific fasteners like "3x10mm BCS" and "3x8mm BCS" are shown connecting the components. The diagram also includes circular insets labeled "1979 Ford Bronco" and "1979 Chevrolet Blazer", indicating compatibility or specific mounting details for each vehicle model.
