Lithonia Lighting LL Series LED Suspended Linear Fixture

Lithonia Lighting's LL Series offers a versatile suspended linear LED fixture designed for a wide range of applications including open ceilings, retail, office, hospitality, education, healthcare, and transportation.

Features & Specifications

Intended Use: Designed for open, mixed, grid, or hard surface applications, providing a blend of configurability and simplicity.

Construction: Features an extruded aluminum chassis for strength, weight, and thermal performance. Power modules and end caps are injection molded plastic, and the lens is polycarbonate.

Optics: Utilizes a frosted polycarbonate diffuser with 13% uplight to prevent a dark ceiling effect without reducing overall fixture efficiency.

Controls: Offers integrated sensor options including nLight® Wired Networking and nLight AIR Wireless Platform (RES7 sensor). Also features single-room control with Sensor Switch™ VPIR15 or VAPIR15.

Installation: Designed for easy installation with adjustable mounting points and aircraft cable. Power cords are factory installed, and suspension hardware is included.

Listings: UL certified to US and Canadian safety standards. Damp location listed. IP5X Option available. DesignLights Consortium® (DLC) qualified product (check DLC QPL for specific versions).

Warranty: 5-year limited warranty.

Ordering Information

Lead times vary based on options selected. Consult your sales representative.

Series	Lumens	CRI	CCT	Power Drop (See images below on page 6)	Minimum Dimming Level	Dimming
LL4 4' LED Suspended	3000 Lumens	80CRI	30K 3000K	CPD Center Power Drop +	MIN1	ZT Generic 0-10V integrated driver +
	4000 Lumens		35K 3500K	EPD End Power Drop +	MIN10	Dims to 10%
LL8 8' LED Suspended	5000 Lumens		40K 4000K			ZTR Generic 0-10V driver +
	6000 Lumens		50K 5000K			SLD Step level dimming +
	8000 Lumens					EZTR eldoLED 0-10V remote box +
	10000 Lumens					EZCR eldoled controls remote box +
LL16 16' LED Suspended +	12000 Lumens					EZTB eldoLED 0-10V backpack +
	16000 Lumens					EZCB eldoled controls backpack +
	20000 Lumens					Driver backpack

Voltage	Emergency Option	Mounting Type/Overall Suspension + (See images below on page 3)	Finish +
MVOLT (120-277V)	(Blank) no emergency option	F1/120A T-bar ceiling (universal mounting bracket) 120" (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.	WH Matte White, fixture finish and cord set
347 347V +	IE10WCP 10W Emergency backup +	F1/240A T-bar ceiling (universal mounting bracket) 240" (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.	DNA Natural Aluminum, fixture finish and white cord set
	IE10WCPHE 10W Emergency backup w/standby mode (T20) +	F2/120A Hard Ceiling (horizontal J-box) 120" (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.	MB Matte Black, fixture finish and cord set
	IE7WCPHE 7W Emergency back w/standby mode (T20) +	F2/240A Hard ceiling (horizontal J-box) 240" (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy included.
	GTD Generator Transfer Device +	F3/120A Open Ceiling (closed loop) 120" (10ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy not included.
		F3/240A Open Ceiling (closed loop) 240" (20ft) Adjustable Aircraft Cables, 18/5 SJT, Cord Included. Canopy not included.

Note: + Indicates option chosen has ordering restrictions or note. Please reference ordering notes chart. Options are sorted alphanumerically.

Control/ Sensor Configurations

This section details the various control input and sensor options available for the LL Series fixtures.

Control Input	Sensor	Sensor	Notes	Previous Nomenclature
(blank) No Control Input	(blank) No sensor, Control Input function only, if selected.
SSE +	APIR	MSD 7 ADCX	Individual fixture control only. PIR integral occupancy sensor with automatic dimming control photocell.	MSD7ADCX
SSE +	APDT	MSD PDT 7 ADCX	Individual fixture control only. PDT integral occupancy sensor with automatic dimming control photocell.	MSDPDT7ADCX
SSE +	VPIR15	VERTEX 15F EZ OCC VLP	Vertex low-profile on/off occupancy PIR occupancy sensor with VLP programming at 15ft mounting height.	VTX15F0CC
SSE +	VAPIR15	VERTEX 15F EZ ADC VLP	Vertex low-profile on/off occupancy sensor with auto dimming photocell with VLP programming at 15ft mounting height.	VTX15FADC
JOT +	(blank)		Wireless room control with "Just One Touch" pairing.	JOT
JOT + VAPIR15		BTRM JOT BTA + VERTEX 15F EZ ADC VLP GSKT	Wireless room control with "Just One Touch" pairing.	JOTVTX15
NLIGHT + (blank)		nIO EZ PH	nLight enabled only. No onboard sensor.	NLIGHT
NLIGHT + PIR		nIO EZ PH + nES 7	nLight enabled with PIR integral occupancy sensor.	NLIGHT NES7
NLIGHT + PDT		nIO EZ PH + nES PDT 7	nLight enabled with dual technology occupancy control sensor.	NLIGHT NESPDT7
NLIGHT + APIR		nIO EZ PH + nES 7 ADCX	nLight enabled with PIR integral occupancy sensor with automatic dimming photocell.	NLIGHT NES7ADCX
NLIGHT + APDT		nIO EZ PH + nES PDT 7 ADCX	nLight enabled with dual technology occupancy controls sensor with automatic dimming photocell.	NLIGHT NESPDT7ADCX
NLIGHT + VPIR15		nIO EZ PH N80+ VERTEX 8F EZ OCC VLP	nLight enabled with Vertex low-profile on/off occupancy PIR occupancy sensor with VLP programming at 16ft mounting height.	NLIGHT NVTX16FOCC
NLIGHTER + (blank)		nIO EZ PH ER	Emergency nLight enabled only. No onboard sensor.	NLIGHT EMG
NLIGHTER + PIR		nIO EZ PH ER + nES 7	Emergency nLight enabled with PIR integral occupancy sensor.	NLIGHT EMG NES7
NLIGHTER + PDT		nIO EZ PH ER + nES PDT 7	Emergency nLight enabled with dual technology occupancy control sensor.	NLIGHT EMG NESPDT7
NLIGHTER + APIR		nIO EZ PH ER + nES 7 ADCX	Emergency nLight enabled with PIR integral occupancy sensor with automatic dimming photocell.	NLIGHT EMG NES7ADCX
NLIGHTER + APDT		nIO EZ PH ER + nES PDT 7 ADCX	Emergency nLight enabled with dual technology occupancy controls sensor with automatic dimming photocell.	NLIGHT EMG NESPDT7ADCX
NLIGHTER + VPIR15		nIO EZ PH N80+ VERTEX 8F EZ OCC VLP	Emergency nLight enabled with Vertex low-profile on/off occupancy PIR occupancy sensor with VLP programming at 15ft mounting height.	NLIGHT EMG CL80 NVTX15FOCC
NLIGHTLM + (blank)		nIO EZ PH N80	nLight enabled only with 80% constant lumen management. No onboard sensor.	NLIGHT CL80
NLIGHTLM + PIR		nIO EZ PH N80 + nES 7	nLight enabled with 80% constant lumen management with PIR integral occupancy sensor.	NLIGHT CL80 NES7
NLIGHTLM + PDT		nIO EZ PH N80 + nES PDT 7	nLight enabled with 80% constant lumen management with dual technology occupancy control sensor.	NLIGHT CL80 NESPDT7
NLIGHTLM + APIR		nIO EZ PH N80 + nES 7 ADCX	nLight enabled with 80% constant lumen management with PIR integral occupancy sensor with automatic dimming photocell.	NLIGHT CL80 NES7ADCX
NLIGHTLM + APDT		nIO EZ PH N80 + nES PDT 7 ADCX	nLight enabled with 80% constant lumen management with dual technology occupancy controls sensor with automatic dimming photocell.	NLIGHT CL80 NESPDT7ADCX
NLIGHTLM + VPIR15		nIO EZ PH N80+ VERTEX 8F EZ OCC VLP	nLight enabled with 80% constant lumen management with Vertex low-profile on/off occupancy PIR occupancy sensor with VLP programming at 16ft mounting height.	NLIGHT CL80 NVTX16FOCC
NLIGHTLMER + (blank)		nIO EZ PH ER N80	Emergency nLight enabled only with 80% constant lumen management. No onboard sensor.	NLIGHT EMG CL80
NLIGHTLMER + PIR		nIO EZ PH ER N80 + nES 7	Emergency nLight enabled with 80% constant lumen management with PIR integral occupancy sensor.	NLIGHT EMG CL80 NES7
NLIGHTLMER + PDT		nIO EZ PH ER N80 + nES PDT 7	Emergency nLight enabled with 80% constant lumen management with dual technology occupancy control sensor.	NLIGHT EMG CL80 NESPDT7
NLIGHTLMER + APIR		nIO EZ PH ER N80 + nES 7 ADCX	Emergency nLight enabled with 80% constant lumen management with PIR integral occupancy sensor with automatic dimming photocell.	NLIGHT EMG CL80 NES7ADCX
NLIGHTLMER + APDT		nIO EZ PH ER N80 + nES PDT 7 ADCX	Emergency nLight enabled with 80% constant lumen management with dual technology occupancy controls sensor with automatic dimming photocell.	NLIGHT EMG CL80 NESPDT7ADCX
NLIGHTLMER + VPIR15		nIO EZ PH ER N80+ VERTEX 8F EZ OCC VLP	Emergency nLight enabled with 80% constant lumen management with Vertex low-profile on/off occupancy PIR occupancy sensor with VLP programming at 15ft mounting height.	NLIGHT EMG CL80 NVTX15FOCC
NLTAIR2 + (blank)		NLTAIR2 RIO	nLight AIR Generation 2 enabled.	NLTAIR2
NLTAIR2 + APIR		NLTAIR2 RIOEM	nLight AIR Generation 2 enabled	NLTAIR2
NLTAIR2 + APDT		RES7 G2	nLight AIR Generation 2 enabled.	NLTAIR2 RES7
NLTAIR2 + APIREM		RES7 PDT 180D G2	nLight AIR Generation 2 enabled.	NLTAIR2 RES7PDT
NLTAIR2 + APDTEM		RES7 EM 180D G2	nLight AIR Generation 2 enabled.	NLTAIR2 RES7EM
		RES7 PDT EM 180D G2	nLight AIR Generation 2 enabled.	NLTAIR2 RES7PDTEM

What's in the Box & Mounting/Hardware Bag

Details the included components for different mounting configurations.

Configuration	Components
F1 - T-GRID ceiling mount	LL4 EPD: 1ZAC + 1ZACFP + 2 T GRID CLIPS LL8 CPD: 2ZAC + 1ZACFP + 3 T GRID CLIPS LL8 EPD: 1ZAC + 1ZACFP + 2 T GRID CLIPS LL16 CPD: 2ZAC + 1ZACFP + 3 T GRID CLIPS LL16 EPD: 2ZAC + 2ZACFP + 4 T GRID CLIPS
F2 - Hard ceiling mount	LL4 EPD: 1ZAC + 1ZACFP LL8 CPD: 2ZAC + 1ZACFP LL8 EPD: 1ZAC + 1ZACFP LL16 CPD: 2ZAC + 1ZACFP LL16 EPD: 2ZAC + 2ZACFP
F3 - Open ceiling mount	LL4 EPD: 2LLAC + 1PC LL8 CPD: 3LLAC + 1PC LL8 EPD: 2LLAC + 1PC LL16 CPD: 3LLAC + 1PC LL16 EPD: 4LLAC + 2PC

Hardware Images:

Joiner Bracket LLCR
DEM-Decorative End Module
DEC- Decorative End Cap
U0776 (Tgrid Clip)
Sliding Mounting Hardware
Screws for power Module Connection
Remote Box Bracket
Remote Box Hanger Bracket
POWER CORD (PC)
LLAC
ZAC
ZACFP
Remote Driver Box/Emergency Battery Box

Optional Replacement Parts

CI Code	Model	Description
*265WLF	LLAC120	120" cable gripper w/nut - NO Canopy
*265WLG	LLAC240	240" cable gripper w/nut - NO Canopy
*267MEP	LLCNPY WHT	White, 5" Canopy with 15/32" and 1/2" diameter holes
*267MF2	LLCNPY BLK	Black, 5" Canopy with 15/32" and 1/2" diameter holes
*211C82	ZAC120	120" cable gripper w/nut - INCL 5" MATTE WHITE CANOPY & BRACKET
*250E2S	ZAC120 MB	120" cable gripper w/nut - INCL 5" MATTE BLACK CANOPY & BRACKET
*217YRX	ZAC240	240" cable gripper w/nut - INCL 5" MATTE WHITE CANOPY & BRACKET
*2512MC	ZAC240 MB	240" cable gripper w/nut - INCL 5" MATTE BLACK CANOPY & BRACKET
*233RV9	ZACFPD120	5-conductor power feed & 120" cable gripper w/nut - INCL 5" MATTE WHITE CANOPY & BRACKET
*250E7S	ZACFPD120 MB	5-conductor power feed & 120" cable gripper w/nut - INCL 5" MATTE BLACK CANOPY & BRACKET
*233RVA	ZACFPD240	5-conductor power feed & 240" cable gripper w/nut - INCL 5" MATTE WHITE CANOPY & BRACKET
*2512MJ	ZACFPD240 MB	5-conductor power feed & 240" cable gripper w/nut - INCL 5" MATTE BLACK CANOPY & BRACKET
*266EU4	DEM-DECORATIVE END MODULE	Decorative end module, Matte White
*266EUK	LLCR MPM MB	Decorative end module, Matte Black
*266EUG	LLCR MPM DNA	Decorative end module, Natural Aluminum
*27253J	RK3LLCR	Joiner, Galvanized Steel (comes std w/fixture)
*212NF3	U0776	Clip used to convert aircraft mounting from JBOX to T-Grid
	LLCR MPM

Dimensions

Diagrams illustrating the dimensions of various LL Series fixture configurations.

LL4 Dimensions:

End Power Drop DEC: 43.0" [1092mm]
End Power Drop DEM: 55.3" [1404mm]

LL8 Dimensions:

Center Power Drop: 64.6" [1641mm]
End Power Drop DEC: 52.6" [1335mm]
End Power Drop DEM: 98.5" [2502mm]

LL16 Dimensions:

Center Power Drop: 103.3" [2624mm]
End Power Drop DEC: 91.0" [2311mm]
End Power Drop DEM: 112.6" [2860mm]

Performance Data

Nomenclature	Lumens	Wattage	LPW
LL4 3000LM 80CRI 40K MVOLT	3000	26	117
LL4 4000LM 80CRI 40K MVOLT	4045	33	123
LL4 5000LM 80CRI 40K MVOLT	4955	41	120
LL8 6000LM 80CRI 40K MVOLT	6111	50	121
LL8 8000LM 80CRI 40K MVOLT	8327	66	127
LL8 10000LM 80CRI 40K MVOLT	9786	79	124
LL16 12000LM 80CRI 40K MVOLT	12223	101	121
LL16 16000LM 80CRI 40K MVOLT	16655	131	127
LL16 20000LM 80CRI 40K MVOLT	19572	158	124

Notes on Lumen/Wattage:

For 30K - Factor in 5% lumen reduction
For 35K - Factor in 3% lumen reduction
For 50K - Factor in 2% lumen increase
For 347V - Factor in 12% wattage increase

Projected LED Life:

	L90	L80	L70
Hours	44K	92K	150K

Values are projections based on TM-21 and at 25C Ambient.

Pallet Dimensions & Fixture Weights

Length/ configuration	Fixtures per pallet	Pallet Dims (L X W)
4ft	84	50X51
8ft CPD	42	51X51
8ft EPD	56	50X102
16ft CPD, EPD	56	50X102

Fixture Weights:

Length	Weight
4ft	6lbs
8ft	8lbs
16ft	12lbs

Configurations

Visual representation of different configuration options for LL Series fixtures.

ZT/SLD/EZTR/EZCR Configurations:

LL4 EPD DEM
LL4 EPD DEC
LL8 CPD
LL8 EPD DEM
LL8 EPD DEC
LL16 CPD
LL16 EPD DEM

EZTB/EZCB Configurations:

LL4 EPD DEM
LL4 EPD DEC
LL8 CPD
LL8 EPD DEM
LL8 EPD DEC
LL16 CPD
LL16 EPD DEM

	Lithonia Lighting LL Series LED Suspended Linear Fixture - Features, Specifications, and Ordering Comprehensive guide to the Lithonia Lighting LL Series LED Suspended linear fixture, detailing features, specifications, control options (nLight, SensorSwitch), mounting hardware, performance data, and ordering information.
	Lithonia Linear LED Suspended Fixture - Specifications and Ordering Guide Detailed specifications, features, and ordering information for the Lithonia Linear LED Suspended fixture, including control options, mounting hardware, and performance data.
	Lithonia Lighting WL2 LED Wall Bracket & Surface Mount Luminaire Specifications Comprehensive details on the Lithonia Lighting WL2 LED wall bracket and surface mount luminaire, covering features, specifications, ordering, nLight controls, sensors, performance data, and dimensions.
	Lithonia Lighting WL4 Wall Bracket & Surface Mount LED Spec Sheet Detailed specifications and ordering information for the Lithonia Lighting WL4 series wall bracket and surface mount LED luminaire, featuring nLight controls, various lumen packages, and sensor options.
	Lithonia Lighting 2BLT2: 2'x2' Volumetric Recessed LED Luminaire Detailed specifications and features for the Lithonia Lighting 2BLT2, a 2'x2' volumetric recessed LED luminaire. Learn about its construction, optics, electrical specifications, nLight controls integration, and ordering options.
	Lithonia Lighting BLT Series 1'x4' LED Luminaire: Features, Specifications, and nLight Controls Detailed product specification sheet for the Lithonia Lighting BLT Series 1'x4' LED luminaire. Covers features, construction, optics, electrical specifications, nLight platform integration (Air and Wired), sensor options, ordering information, emergency battery packs, and performance data for commercial applications.
	Lithonia Lighting MLX LED Linear Low Bay Fixture Specifications and Ordering Guide Comprehensive guide to the Lithonia Lighting MLX LED Linear Low Bay fixture, covering features, specifications, ordering information, dimensions, performance data, and light distributions. Includes details on various configurations, optics, electrical specifications, installation, and warranty.
	Lithonia Lighting EPANL LED Flat Panel - High-Performance Edge-Lit Lighting Discover the Lithonia Lighting EPANL Series LED Edge-Lit Flat Panel, offering glare-free illumination, advanced nLight controls, and versatile configurations for commercial spaces. Learn about features, specifications, and ordering options.