DJI Matrice 4D Series Quick Start Guide

Product Overview

This guide uses the Matrice 4TD aircraft as an example. Please refer to the actual product purchased. The aircraft comes with a micro SD card. In some regions, an FTS module is included. The aircraft needs to be installed with an FTS module to meet C6 requirements.

Key Components:

• Gimbal and Camera Auxiliary Light
• Front LEDs
• Aircraft Status Indicators
• Beacon
• Power Button
• Battery Level LEDs
• Assistant Port
• microSD Card Slot
• E-Port (E-Port Lite)

For detailed information, scan the QR code or visit the links provided:

Video Tutorials

Downloads and Manuals

For support, visit: DJI Support

Getting Started

1. Charging

   Charge the remote controller to activate the internal battery before first use.

2. Preparing the Aircraft

   Ensure the aircraft is powered off before proceeding.

3. Power On, Linking and Activation

   Power on the aircraft by pressing and then holding the power button. Devices require activation before first use. Ensure the remote controller is connected to the internet and follow the instructions in the app for activation. When using with the dock, refer to the dock package manuals for installation, preparation, linking, and activation.

4. Preparing the Remote Controller

   Avoid operating other wireless devices at the same frequency as the remote controller to prevent signal interference.

5. Flight Operations

   • Start (Stop) Motors: Perform the Combination Stick Command (CSC) and hold for two seconds.
   • Take off
   • Land
   • Manual Flight

   Always set an appropriate Return to Home (RTH) mode and altitude before takeoff. Press the Flight Pause button for emergency braking during flight.

Installing DJI Cellular Dongle 2 (Optional)

Operate when the aircraft is powered off. To avoid damage, do not apply force onto the dongle surface or pull the antennas by force. Make sure the antenna cables are firmly connected and the cable routing is tidy.

The aircraft supports installing DJI payloads. The installation method for the dongle may differ if the aircraft is used with the FTS module. Scan the code or visit the link to access the user manual or accessory guide for product usage and safety instructions.