DJI Matrice 4D Series Quick Start Guide

Introduction

This guide provides essential information for setting up and operating the DJI Matrice 4D Series aircraft. It uses the Matrice 4TD aircraft as an example; please refer to the actual product purchased. The aircraft includes a micro SD card. In some regions, an FTS module is included, which is required for the aircraft to meet C6 requirements.

Key components illustrated include various connectors like USB-A, USB-C, and mounting hardware such as M2.5 and M1.6 screws.

For detailed video tutorials and downloads, visit: https://enterprise.dji.com/dock-3/video and https://enterprise.dji.com/dock-3/downloads.

Getting Started

1. Charging

Charge the remote controller to activate its internal battery before first use.

2. Preparing the Aircraft

Mount the gimbal protector before transportation to prevent damage.

3. Powering On

To power on the aircraft, briefly press the power button once, then press and hold it for two seconds.

4. Activation

All new devices require activation. Ensure the remote controller is connected to the internet and follow the instructions within the DJI Pilot 2 app for activation.

5. Preparing the Remote Controller

To avoid signal interference, do not operate other wireless devices on the same frequency as the remote controller.

6. Flight Operations

Start/Stop Motors: Perform the Combination Stick Command (CSC) and hold for two seconds.
Takeoff: Initiate takeoff.
Land: Initiate landing.
Manual Flight: Control the aircraft manually.

Important Safety Notes:

Always set an appropriate Return to Home (RTH) mode and RTH altitude before takeoff.
Press the Flight Pause button for emergency braking during flight.

Component Identification

Aircraft Components

No.	Component	Description
1	Gimbal/Camera Aux Light	Auxiliary light for gimbal and camera.
2	Front LEDs	Front indicator lights.
3	Status Indicators	Indicates the aircraft's current status.
4	Beacon	Position beacon light.
5	Power Button	Button to turn the aircraft on/off.
6	Battery LEDs	Indicates the remaining battery level.
7	Assistant Port (E-Port Lite)	Auxiliary port for connection.
8	microSD Slot	Slot for inserting a microSD card.
9	E-Port (E-Port Lite)	External port for accessories or data transfer.

Remote Controller Components

No.	Component	Description
1	Back Button	Returns to the previous screen or function.
2	RTH Button	Initiates the Return to Home function.
3	Status LED	Indicates the status of the remote controller.
4	Battery LEDs	Indicates the remaining battery level of the remote controller.
5	Power Button	Button to turn the remote controller on/off.
6	Pause Button	Press for emergency braking during flight.
7	Gimbal Dial	Controls the gimbal's tilt.
8	Record Button	Starts or stops video recording.
9	Flight Mode Switch	Switches between different flight modes.
10	Focus/Shutter Button	Controls focus and takes photos.

Installing DJI Cellular Dongle 2 (Optional)

This section describes the optional installation of the DJI Cellular Dongle 2. Operate when the aircraft is powered off. To avoid damage, do not apply excessive force onto the dongle surface or pull the antennas forcefully. Ensure antenna cables are firmly connected and cable routing is tidy.

The aircraft supports installing DJI payloads. The installation method for the dongle may differ if the aircraft is used with an FTS module.

For detailed instructions, scan the QR code or visit the provided links to access the user manual or accessory guide.

	DJI Matrice 4D Series Quick Start Guide A quick start guide for the DJI Matrice 4D Series, covering charging, aircraft preparation, linking and activation, remote controller preparation, and basic flight operations.
	DJI Matrice 4D Series Quick Start Guide Quick start guide for the DJI Matrice 4D Series aircraft, covering charging, aircraft and remote controller preparation, linking and activation, basic flight operations, and optional accessory installation.
	DJI FlightHub 2 Private Version Firmware Compatibility This document outlines the required firmware versions for DJI aircraft, remote controllers, and the DJI Pilot 2 app to ensure compatibility with the FlightHub 2 Private Version.
	DJI Care Enterprise Compatibility Overview for Drones and Payloads A comprehensive overview of DJI Care Enterprise plan compatibility across DJI drone models, payloads, accessories, and remote control solutions, detailing coverage for various DJI products.
	Manual de Voo DJI Matrice 4D Série DJI Dock 3 Este manual fornece instruções detalhadas sobre o voo e operação da aeronave não tripulada DJI Matrice 4D, incluindo informações sobre a estação base DJI Dock 3, configuração, procedimentos de emergência e manutenção. O documento é destinado a utilizadores que operam os produtos DJI.
	DJI Dock 3 DJI Matrice 4D Series Unmanned Aircraft Flight Manual This flight manual provides comprehensive instructions for operating the DJI Dock 3 and DJI Matrice 4D Series unmanned aircraft. It covers general information, system descriptions, performance limitations, normal procedures, emergency protocols, and maintenance guidelines. Learn about aircraft components, powering on/off, status indicators, beacons, cameras, batteries, and the DJI ecosystem.
	DJI Matrice 4D Release Notes and Declaration of Conformity This document contains the release notes and the EU Declaration of Conformity for the DJI Matrice 4D drone. It details software versions, compliance with EU directives, and relevant technical standards.
	DJI Enterprise Drones and Solutions Product Catalog Comprehensive product catalog for DJI Enterprise drones, payloads, docks, and software, including the Matrice series, Zenmuse H20N, H30, L2, P1, DJI Terra, and DJI FlightHub 2. Features detailed specifications and applications for various industries.