WAHL Quick Start Guide

Thank You!

Thank you for purchasing this Wahl haircutting kit. We appreciate your support and hope you enjoy your new clipper!

This is a 22-piece kit designed for smooth cutting and personal grooming.

Keep it Running Like New!

To maintain your clipper, oil the blades regularly, typically every few haircuts. For optimal results, apply three drops of Wahl Clipper Oil (included) to the front of the blades and one drop to each side. Do not use alternative oils, grease, kerosene, or solvents.

[Diagram: Oil application points on clipper blades: three drops on the front, one on each side.]

Your New Clipper

[Image: Wahl clipper, highlighting the Taper Lever, On/Off Switch, and Cord.]

Goof- Proof! Adding Attachment Guards

To attach a guard, align it onto the blade and press down firmly on the guard where the number is located until it audibly snaps into place.

[Diagram: Attaching an attachment guard to the clipper blade until it clicks.]

Removing Attachment Guards

To remove a guard, lift the tab located underneath the guard upwards to release it from the blade.

[Diagram: Lifting the tab from underneath to detach an attachment guard from the clipper blade.]

You can do it! Haircutting Techniques

Visualize the head as being divided into four distinct sections for haircutting. Proper technique when moving between these sections ensures a smooth blend for professional results.

[Diagram: Head divided into four sections for haircutting: Section 1 (neckline), Section 2 (under the rim of the head), Section 3 (the rim or side), Section 4 (top of the head).]

Blend it! Using the Taper Lever

The taper lever enhances blending between different hair lengths. Adjusting the lever allows you to gradually change the closeness of the cut. The up position provides the closest cut, while the down position results in the longest cut.

[Diagram: Clipper's taper lever indicating 'closest cut' (up position) and 'longest cut' (down position).]

It's Easy!

Step-by-step instructions are included with your kit. For additional haircutting tips, techniques, and product registration, please visit grooming.wahl.com.

[Image: Wahl Self-Cut Pro haircutting kit box, showing the 22-piece set.]

Helpful Hints

• Clean excess hair from the clipper and between blades using the included brush. Avoid cleaning under running water.
• SAFETY FIRST! Always read the instruction book before using the clipper.

For any product defects, please contact Wahl customer service at 1-800-767-9245.