IKEA PAX Wardrobe Assembly Instructions (AA-2568171-3)
Parts List
The following parts are required for assembly. Quantities are indicated in parentheses.
- Part 10124988 (x2)
- Part 101558 (x4)
- Part 115344 (x4)
- Part 100751 (x2)
- Part 122972 (x1)
- Part 115345 (x1)
- Part 10093081 (x12)
- Part 10093082 (x16)
- Part 100229 (x1)
- Part 195701 (x12)
- Part 101375 (x2)
- Part 100751 (x8)
- Part 110618 (x2)
- Part 110617 (x2)
- Part 100229 (x2)
- Part 195701 (x2)
- Part 100229 (x6)
- Part 195701 (x16)
- Part 101558 (x4)
- Part 115344 (x4)
- Part 122972 (x2)
- Part 115345 (x2)
- Part 100644 (x4)
- Part 100402 (x4)
- Part 10123654 (x12)
- Part 10080579 (x12)
- Part 151706 (x4)
- Part 151705 (x4)
Note: Some parts may be shown multiple times across different steps or with different quantities depending on the specific configuration being assembled.
Assembly Steps
Step 1
Attach two side panels (Part 10124988) to a base panel. Secure using Part 101558 (x4) and Part 115344 (x4).
Step 2
Attach a back panel support (Part 100751, x2) to the structure. Secure using Part 122972 (x1).
Step 3
Attach another back panel support (Part 115345, x1). Secure using Part 10093081 (x12) and Part 10093082 (x16).
Step 4
Attach a top panel (Part 100229, x1). Secure using Part 195701 (x12).
Step 5
Attach another top panel (Part 100229, x1). Secure using Part 195701 (x12).
Step 6
Install a central divider panel (Part 101375, x2).
Step 7
Attach shelf supports (Part 100751, x8).
Step 8
Attach more shelf supports (Part 100751, x8).
Step 9
Slide in back panels. Secure using Part 110618 (x2) and Part 110617 (x2).
Step 10
Secure back panels using Part 101375 (x2).
Step 11
Secure back panels using Part 101375 (x2).
Step 12
Secure back panels using Part 100229 (x2) and Part 195701 (x2).
Step 13
Secure back panels using Part 100229 (x2) and Part 195701 (x2).
Step 14
Secure back panels using Part 100229 (x2) and Part 195701 (x2).
Step 15
Secure back panels using Part 100229 (x6) and Part 195701 (x16).
Step 16
Secure back panels using Part 10093081 (x16) and Part 10093082 (x12).
Step 17
Secure back panels using Part 101558 (x4) and Part 115344 (x4).
Step 18
Secure back panels using Part 101558 (x4) and Part 115344 (x4).
Step 19
Secure back panels using Part 122972 (x2) and Part 115345 (x2).
Step 20
Secure back panels using the provided fasteners. The diagram shows a part labeled "111121215252393947475252", which is likely a part number or identifier.
Note: The part number "111121215252393947475252" appears to be an anomaly or a very long identifier. It's transcribed as seen.
Step 21
Secure back panels using Part 100644 (x4) and Part 100402 (x4).
Step 22
Secure back panels using Part 10123654 (x12) and Part 10080579 (x12).
Step 23
Secure back panels using Part 151706 (x4) and Part 151705 (x4).
Step 24
Final check. Ensure all connections are secure. The assembled unit can reach a height of up to 244 cm (95 2/3 "). A width of 58 cm (22 7/8 ") is indicated for a specific component or measurement.