Baseus Bowie MF1 Quick Start Guide

2. Powering On/Off

To Power On: Open the charging case and remove the earbuds. They will automatically turn on and enter pairing mode (the earbud indicator light will pulse). For first-time use, remove the insulation stickers from the earbuds, place them back into the charging case, then take them out to begin pairing.

To Power Off: Place the earbuds back in the charging case and close the lid.

Diagram Description: Illustrations show the charging case with earbuds inside, and earbuds removed from the case, labeled 'ON' and 'OFF'.

3. Pairing

Activate Bluetooth on your phone. Select "Baseus Bowie MF1" from the device list to pair.

Diagram Description: An illustration of a smartphone screen showing Bluetooth settings with "Baseus Bowie MF1" selected for pairing.

4. Multipoint Pairing

1. Connect the earbuds to device A. Then, turn off Bluetooth.
2. Connect to device B.
3. Turn Bluetooth on for device A; it will reconnect automatically. Your multipoint connection is now ready.

The earbuds remember the last connected device. To reset pairing mode, place the earbuds in the charging case, open the lid, and hold the case button for 3 seconds until the indicator light flashes white.

Diagram Description: Illustrations show connection steps for multipoint pairing, indicating Device A and Device B.

5. Touch Controls

Play/Pause: Double-tap either earbud (L or R).

Previous Song: Hold the left earbud (L) for 1.5 seconds.

Next Song: Hold the right earbud (R) for 1.5 seconds.

Voice Assistant: Triple-tap either earbud (L or R) to activate.

Answer/End Call: Double-tap either earbud (L or R).

Reject Call: Hold the left or right earbud (L or R) for 1.5 seconds.

Diagram Description: Illustrations of the earbuds show touch-sensitive areas. Icons represent actions: double tap (play/pause, answer/end call), triple tap (voice assistant), hold for 1.5s (previous/next song, reject call).

6. App Control

Download the App and bind the earbuds.

Diagram Description: A smartphone is shown with a QR code, indicating where to download the app.

7. Customized Settings

Method 1: Turn on/off the spatial acoustics, bass enhancement, or low latency mode on the App.

Method 2: Set corresponding gestures in the App for quick access.

8. Charging & Recharging

Charging Earbuds: Place earbuds into the charging case.

Recharging the Charging Case: Use a USB-C cable to connect with a power source.

Diagram Description: An illustration shows the charging case open with earbuds inside, and a USB-C port is visible.

9. Battery Indicator

When opening/closing the lid or pressing the charging case button:

• >20%: White light solid for 10 seconds.
• ≤20%: Red light solid for 10 seconds.

When charging the earbuds: White light flashes for 10 seconds and turns off.

When recharging the case:

• 100%: White light solid.
• >20%: White light flashes.
• ≤20%: Red light flashes.

Diagram Description: Illustrations depict the charging case and earbuds with LED indicators showing battery status (e.g., solid white, flashing white, solid red, flashing red) and durations.

10. Factory Reset

In pairing mode with Bluetooth off, hold both earbuds (L & R) for 8 seconds. The indicator will flash quickly three times, indicating a reset. This will restore custom settings in the App.

Diagram Description: An illustration of the earbuds with an 8-second timer icon.

11. Support

For FAQs, detailed manuals, and more information, please visit: https://www.baseus.com/pages/support-center

Icons: A download icon (⬇️) and an FAQ icon (❓) are displayed.

12. Specifications

• Name: Baseus Open-Ear TWS Earbuds
• Model: Baseus PM131
• Material: ABS + PC
• Bluetooth Version: v. 5.4
• Communication Range: 10 meters
• Music Playback Time: Approximately 12 hours (with volume at 50%)
• Music Playback Time with Charging Case: 60 hours (with volume at 50%)
• Battery Capacity: 65 mAh / 0.241 Wh (Earbuds), 720 mAh / 2.664 Wh (Charging Case)
• Charging Case Rated Input: 5V=500 mA
• Earbud Rated Consumption Current: Approximately 5.6 mA
• Charging Case Rated Consumption Current: 290 mA
• Charging Time: Approximately 1.5 hours
• Frequency Range: 20 Hz – 40 kHz
• Charging Port: USB-C
• Maximum Output Power: +10 dBm
• Operating Temperature: 5 to 40 °C
• Compatibility: Bluetooth-enabled playback devices

*The above data is sourced from Baseus Lab tests, which may differ from environmental change in actual use.

Safety Information

Replacement of a battery with an incorrect type can defeat its safeguard (e.g., for certain lithium battery types).

Disposing of a battery in a fire or a hot oven or physically crushing or cutting it can lead to explosions.

Leaving a battery in an environment with extremely high temperatures can cause explosions or the leakage of flammable liquid or gas.

Using a battery in an environment with extremely low air pressure may result in explosions or flammable liquid or gas leakage.

There is a risk of fire or explosion if the battery is replaced with an incorrect type. Avoid using the battery in extremely high or low temperatures and low air pressure at high altitudes during use, storage, or transportation.

High or low extreme temperatures that a battery can be subjected to during use, storage or transportation:

• During use: maximum 40°C(104°F)
• Storage: -20°C-45°C(-4°F-113°F)
• Transportation: 5°C-35°C(41°F-95°F)

FCC ID: 2A482-PM131

Recycling Information: This device and cords are recyclable. Prioritize repair or donation of your device. Collection points are available at www.quefairedemesdechets.fr. Dispose of at in-store collection points or waste disposal centers.

Diagram Description: A recycling symbol is shown. Social media icons for Facebook, Instagram, X (Twitter), YouTube, and TikTok are displayed. A warning triangle (⚠️) is present. A diagram shows a power adapter with '2.5-5 W' indicating charging power range.