Attestation of Compliance
Attestation Details
Attestation No.: LCSA06124214E
Approval Holder: Shenzhen Xincheng Times Technology Co.,Ltd
Address: 104-105, Block C, Donghai Wang Building No. 369 Bulong Road, Ma'antang Community Bantian Street, Longgang District, Shenzhen China
Product Information
Brand Name: N/A (Product Type: Electric Scooter)
Product: Electric Scooter
Type/Model Name:
- iX7Pro
- iX7
- iX7 Plus
- iX7 Max
- iX7L
- iX7M
- iX7Y
- iX7X
- iX7S
- iX7S Plus
- iX7S Pro
- iX7S Max
- iX5
- iX6
- iX8
- GT3
- GT4
- GT5
H/S Version: HW: M0-LO4-V2.081-20230412H, M0-2BLE8-V5.09-20240404 SW: 043908C4, 043908C5M, 04F3
Compliance Statement
Attestation of the technical design of the radio equipment according to the following essential requirements set out in article 3 of the RED 2014/53/EU:
- Article 3.1a): Health and Safety: Conform
- Article 3.1b): Electromagnetic Compatibility: Conform
- Article 3.2: Effective Use of the Radio Spectrum: Conform
CE-marking: [CE Mark] (Class 1)
Attestation Issuance
This attestation is issued in accordance with the Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment.
Date of issue: July 16, 2024
Manager: [Approved Stamp]
Testing Laboratory Information
Laboratory: Shenzhen LCS Compliance Testing Laboratory Ltd.
Address: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao'an District, Shenzhen, Guangdong, China
Tel: (86)0755-82591330
Fax: (86)0755-82591332
Website: http://www.lcs-cert.com
Email: webmaster@lcs-cert.com
Annex - Applied Standards and Test Reports
| Standard | Laboratory | Test Report Number |
|---|---|---|
| ETSI EN 301 489-1 V2.2.3 (2019-11) | Shenzhen LCS Compliance Testing Laboratory Ltd. | LCSA06124214EA |
| Draft ETSI EN 301 489-17 V3.2.6 (2023-06) | Shenzhen LCS Compliance Testing Laboratory Ltd. | LCSA06124214EB |
| EN 55032:2015/A1:2020 | Shenzhen LCS Compliance Testing Laboratory Ltd. | LCSA06124214EC |
| EN 55035:2017/A11:2020 | Shenzhen LCS Compliance Testing Laboratory Ltd. | LCSA06124213S |
| ETSI EN 300 328 V2.2.2 (2019-07) | Shenzhen LCS Compliance Testing Laboratory Ltd. | |
| EN 62479:2010 | Shenzhen LCS Compliance Testing Laboratory Ltd. | |
| EN 50663:2017 | Shenzhen LCS Compliance Testing Laboratory Ltd. | |
| EN IEC 62368-1:2020+A11:2020 | Shenzhen LCS Compliance Testing Laboratory Ltd. |
General Remarks
- This conformity assessment is limited to the essential requirements of the RED Directive. Only products fulfilling all essential requirements of all applicable new approach directives may be placed on the market and put into service.
- Products in compliance with all provisions of the applicable directives providing for the CE marking must bear this marking.
- The manufacturer shall take all measures necessary so that the manufacturing process and its monitoring ensure conformity of the manufactured radio equipment with the approved type described in the Attestation of Compliance and with the requirements of Directive 2014/53/EU that apply to it.
- This device also contains frequency bands that are not operational in EU member states. Only the frequency bands used in European Union have been assessed for this attestation.
- The manufacturer shall draw up a written EU declaration of conformity for each radio equipment type and keep it at the disposal of the national authorities for 10 years after the radio equipment has been placed on the market. The EU declaration of conformity shall identify the radio equipment type for which it has been drawn up. A copy of the EU declaration of conformity shall be made available to the relevant authorities upon request.
