Electric Scooter Test Report - EN 17128 Compliance

Summary of Testing:

The products were evaluated under EN 17128, 2006/42/EC Annex 1. All tests were conducted and test results were pass.

Test Item Description:

Test Item: ELECTRIC SCOOTER

Model Numbers: IX7 PRO, IX7, IX7 Plus, IX7 Pro, IX7 Max, IX7L, IX7M, IX7Y, IX7X, IX7S, IX7S Plus, IX7S Pro, IX7S Max, IX5, IX6, IX8, GT3, GT4, GT5

Rating(s): Input: AC100-240V, 50/60Hz, 2.5A; Output: DC54.6V, 2A

Test Clauses and Results:

Clause	Requirement/Test	Result - Remark	Verdict
6.1	General mechanical strength	P	P
6.2	Electrical power on/ off control	P	P
6.3	Electrical cables and connections
6.3.1	General	P	P
6.3.2	Cable and plugs	P	P
6.3.2.1	Requirements	N/A	N/A
6.3.2.2	Test method	P	P
6.3.3	Wiring
	a)	P	P
	b)	P	P
	c)	P	P
	d)	P	P
	e)	Separate parts of the vehicles that can move in normal use or during user maintenance relative to each other, shall not cause undue stress to electrical connections and internal conductors, including those providing earthing continuity.	P	P
	f)	If an open coil spring is used to protect wire, it shall be correctly installed and insulated. Flexible metallic tubes shall not cause damage to the insulation of the conductors contained within them. Compliance with e) f) shall be checked by inspection and by the following test method:	P	P
6.3.4	Wiring harness	Tested, no abnormalities	P
6.3.5	Power cables and conduits	P	P
6.3.6	External and internal electrical connections	P	P
6.4	Moisture resistance	IPX4	P
6.5	Resistance to vibration for electric functions	P	P
6.5.1	Requirements	P	P
6.5.2	Test method	P	P
7.1	Driving power management
7.1.1	Driving power activation	Accordance with standard 7.1.1	P
7.1.2	Test method
7.1.2.1	Test conditions	P	P
7.1.2.2	Test procedure	P	P
7.2	Power failure of control system	P	P
7.3	Unintended or unauthorized use of vehicle	P	P
8.1	Speed limitation
8.1.1	Pedestrian mode	P	P
8.1.2	Test method
8.1.2.1	Test conditions	P	P
8.1.2.2	Characteristic of the test track	P	P
8.1.2.3	Characteristic of the test bench	P	P
8.1.2.4	Characteristic of the roller	P	P
8.1.2.5	Test procedure	P	P
8.2	Maximum speed with power assistance
8.2.1	Requirements	Max; 25 km/h	P
8.2.2	Test method
8.2.2.1	Test conditions	P	P
8.2.2.2	Test procedure
8.2.2.2.1	Test for vehicle with 100% electric propulsion	P	P
8.2.2.2.2	Test for vehicle partially electrically powered	P	P
8.3	Reverse mode
8.3.1	Requirement	P	P
8.3.2	Test method	P	P
9	Electromagnetic compatibility
9.1	Emission	P	P
9.2	Immunity	P	P
9.3	Specific performance criterion for PLEV	P	P
10	Battery charger
10.1	General	P	P
10.2	Charging of batteries
	General	P	P
	Test method	P	P
10.3	Safeguarding and complementary protective measures	P	P
11	Energy storage within the vehicle
11.1	Requirements	P	P
11.2	Test method	P	P
12	Structural integrity
12.1	General
12.1.1	Numbers and conditioning of samples	P	P
12.1.2	Test condition tolerances	P	P
12.1.3	Crack detection	P	P
12.2	Deck/frame
12.2.1	Requirement
12.2.1.1	Requirement	P	P
12.2.1.2	Test methods	P	P
12.2.1.3	Test method - 3 - wheeled vehicle	P	P
12.2.1.4	Test method - self - balancing vehicle	P	P
12.2.2	Handlebar and steering column
12.2.2.1	Bending test
	Requirements	P	P
	Test methods	P	P
12.2.2.2	Vertical loading test
	Requirements	P	P
12.2.2.3	Torque test
	Requirement	P	P
	Test method	P	P
12.2.2.4	Handlebar grips and plugs
	Requirements	P	P
	Test method	P	P
12.2.2.5	Telescopic handlebar (if fitted)	P	P
12.3	Frontal impact resistance
12.3.1	Requirements for class 2	P	P
12.3.2	Test method for vehicle of class2	P	P
12.3.3	Requirements for class 4	P	P
12.3.4	Test method for vehicle of class 4	P	P
12.4	Fatigue test (dynamic)
12.4.1	General	P	P
12.4.2	Requirements	P	P
12.4.3	Test method for a 2-wheeled single track vehicle	P	P
12.4.4	Test method for a 3-wheeled vehicle	P	P
12.4.5	Test method for a self-balancing vehicle
12.4.5.1	General	P	P
12.4.5.2	Apparatus	P	P
	Procedure	P	P
13	Edges and protrusions
13.1	General	P	P
13.2	Sharp edges	P	P
13.3	Protrusions	P	P
14	Moving parts
14.1	Clearance between moving parts	P	P
14.2	Guarding of moving parts	P	P
14.3	Folding mechanism
14.3.1	General requirement
14.3.1.1	General	P	P
14.3.1.2	Incomplete deployment	P	P
14.3.1.3	Unintentional release of locking mechanism(s)	P	P
14.3.2	Test methods
14.3.2.1	Preconditioning	P	P
14.3.2.2	Unintentional release of the locking mechanism by one single action	P	P
15	Adequate stability
15.1	Footrest/deck	P	P
15.2	Handlebar adjustment	P	P
15.3	Surface
15.3.1	Slippery surface
15.3.1.1	Requirements for wheel adhesion	P	P
15.3.1.2	Wheel adhesion test	P	P
15.3.2	Irregular surface	P	P
15.4	Braking devices
15.4.1	General	P	P
15.4.2	Braking performance
15.4.2.1	General requirements	P	P
15.4.2.2	Hand operated braking system - Strength test	P	P
15.4.2.3	Dry stop	P	P
15.4.2.4	Vehicle behaviour during braking	P	P
15.4.2.5	Electric failure braking compensation	P	P
15.4.2.6	Parking device	P	P
15.4.3	Test methods
15.4.3.1	Braking test force applications	P	P
15.4.3.2	Hand operated brake strength test	P	P
15.4.3.3	Brake performance test conditions (classes 2 and 4)	P	P
15.4.3.4	Stop performance calculation (classes 2 and 4)	P	P
15.4.3.5	Electric braking failure compensation test
	Requirement	P	P
	Test method for an electrical braking system	P	P
16	Presence awareness
16.1	Lighting
16.1.1	Retro-reflectors	P	P
16.1.2	Front and rear lightning	P	P
16.2	Audible warning to alert persons	P	P
17	System failure and malfunction warning devices
17.1	General	P	P
17.2	Audible/vibrating signalling	P	P
17.3	Loss of connection to the warning system	P	P
18	Hot surfaces
18.1	Requirements	P	P
18.2	Test method	P	P
19	Product information and marking
19.1	General	P	P
19.2	Marking
19.2.1	General	P	P
19.2.2	Durability of marking of the frame or chassis	P	P
19.2.3	Rubbing test	P	P
19.2.4	Battery	P	P
19.2.5	Tyres	P	P
19.3	Purchase information
19.3.1	General	P	P
19.3.2	Information at point of sale	See label	P
19.3.3	Information on the packaging	See packaging	P
19.4	Instructions for use
19.4.1	General	P	P
19.4.2	Noise emission
19.4.2.1	General	P	P
19.4.2.2	Requirements	P	P
19.4.3	Battery charging	P	P

Photo Documents:

Photo 1: Front view of the electric scooter.

Photo 2: Manufacturer's label on the electric scooter.

Photo 3: Front view of the electric scooter.

Photo 4: Side view of the electric scooter.

Photo 5: Close-up of the handlebar area of the electric scooter.

Photo 6: Rear wheel and suspension of the electric scooter.

Photo 7: Display unit of the electric scooter.

Photo 8: Rear suspension and wheel assembly of the electric scooter.

Photo 9: Handlebar controls of the electric scooter.

Photo 10: Top view of the electric scooter deck.

Photo 11: Close-up of handlebar controls.

Photo 12: Accessory bag for the electric scooter.

Photo 13: Accessory bag for the electric scooter.

Photo 14: Battery charger and its cable.

Photo 15: Battery charger.

	Attestation of Compliance for iScooter Electric Scooters Official Attestation of Compliance for iScooter electric scooter models, confirming adherence to RED Directive 2014/53/EU essential requirements for health, safety, and electromagnetic compatibility.
	iScooter Electric Scooter Compliance Certificate - Jinhua Fenghang Technology Official Certificate of Compliance for iScooter electric scooters manufactured by Jinhua Fenghang Technology, confirming adherence to LVD directive 2014/35/EU and EN 60335 standards.
	iScooter iX7 Pro Electric Scooter User Manual Comprehensive user manual for the iScooter iX7 Pro electric scooter, covering safety, product overview, display, buttons, settings, package contents, specifications, error codes, unfolding/folding instructions, charging, cleaning, storage, FAQs, and contact information.
	iScooter iX7 Pro: User Guide and Safety Manual Explore the iScooter iX7 Pro electric scooter with this comprehensive user manual. Learn about safety guidelines, product features, operation, maintenance, and troubleshooting for your iX7 Pro.
	iScooter iX7 Pro Electric Scooter User Manual and Specifications Comprehensive user manual for the iScooter iX7 Pro electric scooter, covering safety guidelines, product overview, display functions, buttons, settings, specifications, error codes, charging, maintenance, and FAQs.
	iScooter iX7 Pro Electric Scooter User Manual Comprehensive user manual for the iScooter iX7 Pro electric scooter, covering safety, product overview, display, buttons, settings, specifications, error codes, unfolding/folding, charging, cleaning, storage, FAQs, and contact information.
	iScooter i10Plus User Manual: Setup, Operation, and Specifications Comprehensive user manual for the iScooter i10Plus electric scooter. Learn about assembly, operation, charging, specifications, safety guidelines, and app integration.
	iScooter iX4 Electric Scooter User Manual Comprehensive user manual for the iScooter iX4 electric scooter, covering setup, operation, controls, display, settings, specifications, safety, and disposal. Learn how to unfold, fold, adjust, and charge your iX4 for optimal riding experience.

TEST REPORT

EN 17128

Summary of Testing:

Test Item Description:

Test Clauses and Results:

Photo Documents:

Related Documents