USER MANUAL
English
Introduction
Unleash the power of effortless tracking with our cutting-edge Bluetooth wireless device, seamlessly integrated with the 'iSearching' application. Simply pair it with your frequently misplaced belongings and experience a new level of convenience. Within an impressive wireless LAN connection range of approximately 25 meters (75 feet with no barriers), locate your belongings effortlessly. Activate the beep feature through the app, make your phone ring with a double-click, or even snap photos using the button located on the device. Say goodbye to the hassle of searching for keys, bags, remote controls, wallets, and phones – our product ensures you find what matters most with unparalleled ease.
When the product is out of your phone's wireless LAN range, dual alerts are received on both the device and your phone, ensuring you never miss a beat. Plus, the 'iSearching' app will mark the last known location on the map. To unlock this unparalleled feature, simply activate the 'Phone Alarm While Lost' function in the settings. Safeguard your belongings and phone within a certain range, receiving timely reminders if you forget to take them along. Bid farewell to worries – our product ensures you stay connected and protected, every step of the way.
To use the app seamlessly, make sure your device meets these following requirements:
- Wireless LAN 5.2
- iOS (8.0 or later) or Android (4.4 or later)
APP DOWNLOAD AND INSTALLATION
You can download the 'iSearching' app from:
- App Store [App Store logo]
- Google Play [Google Play logo]
POWER ON/OFF
Power On: Press and hold the tracker's button for at least 3 seconds to turn power on. You will hear two beeps [??] to indicate the device is turned on.
Power Off: Press and hold the tracker's button for at least 3 seconds to turn power off. You will hear a long single beep [?] to indicate the device is turned off.
GETTING STARTED
Launch the app on your smartphone. Take a moment to check the tutorial page, and don't forget to tap 'Allow' [✔️] to turn app's notifications on.
Tap here or use the drop-down menu [⬇️] to add devices.
Tap 'Connect' [➡️] to connect a device.
Tap 'Find Device' [?] to make the tracker beep [?].
Tap 'Cancel' [❌] to stop the beeps.
When your tracker is connected and within range, you may use it to find your misplaced phone. Press the button twice [▶️▶️] in succession to trigger an alert on your phone. Tap 'Confirm' [✔️] to stop the alert.
You can change the device name (e.g., Wallet, Key, Dog, etc.). Capture and save a picture [?] for future reference.
Go to settings [⚙️]
Slide to the left [⬅️] to delete a device.
To use the Anti-Lost Alarm feature, you must turn on this button [?️].
TAKING SELFIES
Tap 'Camera' [?] to open the camera, then press the connected tracker's button to capture a photo, functioning as a remote shutter.
Easily switch between the front and rear cameras [?].
Enable 'Do Not Disturb' [?] to deactivate the alarm function on all devices.
Alarm and Voice Recording Settings [?️]. This is where your voice recordings will be stored.
LOCATION
Location History: When you park your car, simply press the tracker's button to mark your current location on the map. To locate your vehicle, just tap 'Location History' [?].
Lost History: In case you misplace your tracker, find it effortlessly in the 'Lost History.' A pin [?] will be dropped automatically on the map, providing you with the tracker's location. Just tap 'Lost History' to access the record.
BATTERY REPLACEMENT
Battery type: CR2032
The CR2032 is a common type of standard size battery, making it easier to purchase and replace.
To replace the battery, simply open the tracker's button serving as the battery cover [?].
[Diagram showing CR2032 battery and tracker with button as cover]
