USER MANUAL
English
iSearching [iSearching logo]
[Google Play button] [App Store button] [App Store button]
Apple, APP Store, iPhone, iPad and iPod touch are trademarks of Apple Inc. Google play is a trademark of Google Inc. All other trademarks used herein are the property of their respective owners.
This manual is designed to help you fully understand how to use the product for your benefit.
Unleash the power of effortless tracking with our cutting-edge Bluetooth wireless device, seamlessly integrated with the 'isearching' application. Simply pair it with your frequently misplaced belongings and experience a new level of convenience. Within an impressive Bluetooth connection range of approximately 25 meters (75 feet with no barriers), locate your belongings effortlessly. Activate the beep feature through the app, make your phone ring with a double-click, or even snap photos using the button located on the device. Say goodbye to the hassle of searching for keys, bags, remote controls, wallets, and phones – our product ensures you find what matters most with unparalleled ease.
When the product is out of your phone's Bluetooth range, dual alerts are received on both the device and your phone, ensuring you never miss a beat. Plus, the 'isearching' app will mark the last known location on the map. To unlock this unparalleled feature, simply activate the 'Phone Alarm While Lost' function in the settings. Safeguard your belongings and phone within a certain range, receiving timely reminders if you forget to take them along. Bid farewell to worries; our product ensures you stay connected and protected, every step of the way.
System Requirements
- Bluetooth 5.2
- iOS (8.0 or later) or Android (4.4 or later)
App Download and Installation
You can download the 'isearching' app from:
- App Store [App Store icon]
- Google Play [Google Play icon]
Power On/Off
Power On
[press and hold] the tracker's button for at least 3 seconds to turn power on. You will hear two beeps to indicate the device is turned on.
Power Off
[press and hold] the tracker's button for at least 3 seconds to turn power off. You will hear a long single beep to indicate the device is turned off.
Getting Started
[Launch] the app on your smartphone. Take a moment to check the tutorial page, and don't forget to [tap] '[allow]' to turn app's notifications on.
[Tap] '[Connect]' to connect a device.
[Click alarm] to make the tracker beep.
[Tap] '[Cancel]' to stop the beeps.
Go to [settings].
[Slide left] to delete a device.
Taking Selfies
[Tap] '[Camera]' to open the camera, then [press] the connected tracker's button to capture a photo, functioning as a remote shutter.
Easily switch between the front and rear cameras.
Settings
Do Not Disturb Settings
Do not disturb time: 23:00-07:00
[Enable] '[Do Not Disturb]' to deactivate the alarm function on all devices.
Recording Settings
[Double click] to record.
About Software
Version: 1.1.3
Alarm and Voice Recording Settings. This is where your voice recordings will be stored.
Found the phone?
When your tracker is connected and within range, you may use it to find your misplaced phone. [Press] the button [twice] in succession to trigger an alert on your phone. [Tap] '[Confirm]' to stop the alert.
Location
Location History
When you park your car, simply [press] the tracker's button to mark your current location on the map. To locate your vehicle, just [tap] '[Location History]'.
Lost History
In case you misplace your tracker, find it effortlessly in the '[Lost History]'. A pin will be dropped automatically on the map, providing you with the tracker's location. Just [tap] '[Lost History]' to access the record.
Battery Replacement
Battery type: CR2032
The CR2032 is a common type of standard size battery, making it easier to purchase and replace. To replace the battery, simply open the tracker's button serving as the battery cover.
Anti-Lost Alarm Feature
TO USE THE ANTI-LOST ALARM FEATURE, YOU MUST TURN ON THIS BUTTON.
FCC Compliance Information
FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
