Tuya 2.4GHz Gateway
Model No.: GW01W
1. Features
- Compatible with 2.4GHz RF products; controlled by Smart Life or Tuya Smart APP via Wi-Fi or 4G/5G network.
- 16 million color options.
- Adjustable color temperature (2700K-6500K).
- Brightness and saturation control.
- Bluetooth wireless control.
- 2.4G RF wireless transmission technology.
- Supports Tap-to-Run and automation features.
- Dedicated Link/Unlink/Reset button.
- Wi-Fi wireless control.
- Smartphone App control.
- Supports third-party voice control.
- Group control functionality.
- Device sharing capability.
- Supports music rhythm synchronization.
- Timing and countdown functions for LED lights.
2. Parameters
| Parameter | Value |
|---|---|
| Model No. | GW01W |
| Input | DC5V/500mA (Type-C) |
| Working Temperature | -25~40°C |
| Communication Mode | WiFi-IEEE 802.11b/g/n |
| RF | 2.4GHz |
| Product Weight | 65g |
| Size | 73*71*27mm |
A diagram shows the gateway with dimensions: 73mm length, 71mm width, and 27mm height.
3. Pilot Lamp Indication
For optimal performance, install the device within 30 meters of lights and close to the Wi-Fi router.
| Pilot Lamp Status | SYS Red Pilot lamp | Linking Blue Pilot lamp | Linked green Pilot lamp |
|---|---|---|---|
| ON | Power ON Gateway | Smart Link Mode | Gateway linked to WiFi |
| OFF | Power OFF Gateway | Not on Smart Link Mode | Gateway Disconnect to WiFi |
4. How to link/reset gateway to Smartphone
1. Download and install [Smart Life] or [Tuya Smart] APP
Two QR codes are displayed. One is for the 'Smart Life' app, and the other is for the 'Tuya Smart' app. Users are instructed to scan these codes to download and install the respective applications from their app stores. Instructions are provided for creating a new account or logging in.
2. Link to smartphone or Reset the device
Ensure the smartphone is connected to a WLAN network. Power on the device; the SYS red pilot lamp should be continuously lit, indicating normal operation. To enter smart link/reset mode, long-press the 'SET' button for over 3 seconds until the Blue linking pilot lamp illuminates. Open the signed-in app; it should automatically discover devices. If not, manually add the device by tapping the '+' icon and following the on-screen steps. A Green linked pilot lamp indicates successful linking.
A screenshot shows the 'All Devices' screen within the app, listing '2.4G Gateway' and other device types like 'Living Room' and 'Master Bedroom'. A button labeled 'Add' is visible.
Note: The linking process must be completed within 10 minutes. If the time limit is exceeded, repeat steps 3 and 4.
Device Discovery and Control
Added devices will be displayed on the homepage after linking successfully. Tap the device to access its control interface for further operations.
2. Unlink Gateway
Two methods are provided for unlinking the gateway:
- Method 1: Turn off the linked lamps, then turn them back on. Press the 'SET' button on the 2.4G gateway once within 5 seconds. A rapid blinking of the lights 10 times signifies successful unlinking.
- Method 2: Open the linked app, select the white control panel, turn off the linked lamps, then turn them back on. Quickly click the first part (0-5%) and the end part (95-100%) of the color temperature slider four times each (total of 8 clicks) within 5 seconds. A rapid blinking of the lights 10 times signifies successful unlinking.
A screenshot shows the '2.4G Gateway' control interface within the app, displaying a color wheel with a brightness indicator at '0%' and a color temperature slider.
5. How to link & unlink controllers & lights to 2.4G gateway
Users must first link the gateway to their smartphone before proceeding with linking and unlinking controllers and lights to the gateway.
1. Link Controllers & Lights
- Method 1: Turn off the lamps to be linked, then turn them back on. Press the 'SET' button on the 2.4G gateway once within 5 seconds. A slow blinking of the lights 3 times signifies successful linking.
- Method 2: Open the linked app, select the white control panel, turn off the lamps to be linked, then turn them back on. Click the first part (0-5%) and the end part (95-100%) of the color temperature slider twice each (total of 4 clicks) within 5 seconds. A slow blinking of the lights 3 times signifies successful linking.
Note: Users can choose either method for linking and unlinking.
A screenshot shows the '2.4G Gateway' control interface within the app, with color and color temperature controls.
6. Group Control
A single 2.4GHz Gateway can control numerous devices simultaneously, acting as one group. To create multiple groups, additional 2.4GHz gateways are required. For instance, four groups necessitate four 2.4GHz gateways.
7. Attention
- Verify that the output voltage matches the device's rated voltage before installation.
- The input voltage is DC5V/500mA. Do not use power supplies exceeding DC5V, as this can damage the device.
- Do not attempt to dismantle the device without professional knowledge, as this may cause damage.
- The operating temperature range is -25°C to 45°C. Avoid installing the device in direct sunlight, humid environments, or areas with high temperatures.
- Avoid installing the device near metallic objects or areas with strong magnetic fields, as this can negatively impact the control distance.
CE and RoHS compliance marks are displayed, along with 'Made in China'.
