myenergi Zappi Mounting Post
Product Overview
This document outlines the components and hardware required for the assembly of the myenergi Zappi mounting post, designed to securely house and position a Zappi electric vehicle charger.
Assembly Components
The mounting post assembly consists of the following key parts:
- A backplate or housing unit, designed to interface with the EV charger.
- Two primary vertical support posts that form the main structure of the mounting post.
- A base plate, to which the vertical posts are attached, providing stability and a mounting surface.
- The myenergi Zappi EV charger unit (shown mounted in the final configuration).
Hardware
The following fasteners are provided for assembly:
- M6 x 20mm Bolts with M6 Washers: Quantity of 3. These are typically used for securing specific components, such as the charger housing or associated brackets.
- M8 x 16mm Bolts with M8 Washers: Quantity of 8. These are used for the primary structural connections, likely for assembling the vertical posts to the base plate and potentially for other main structural joints.
Assembly diagrams indicate the use of these fasteners at various connection points throughout the structure, with arrows showing the direction of attachment.
Manufacturer Information
Designed and manufactured in the UK by:
myenergi Ltd
Church View Business Park, Binbrook, Lincolnshire, LN8 6BY, UK
Telephone: +44 (0)33-300 1303
Email: vibe@myenergi.uk
Website: myenergi.com
