Philips Azur 7000 Series Steam Iron User Manual

Introduction

This user manual provides essential information for the Philips Azur 7000 Series Steam Iron. It covers setup, operation, maintenance, and safety features to ensure optimal performance and user safety.

The iron is equipped with an automatic shut-off feature for enhanced safety.

Getting Started and Operation

Preparing for First Use

A small amount of smoke may be visible during the initial use of the iron. This is a normal occurrence and will dissipate quickly.

Filling the Water Tank

1. Ensure the iron is unplugged and has cooled down.
2. Open the water tank cap.
3. Fill the water tank to the MAX indicator line using a clean cup or jug.
4. Close the water tank cap securely.

Selecting Fabric and Temperature Settings

Choose the appropriate fabric setting and temperature using the rotary dial. Refer to the fabric care labels on your garments.

• LINEN (麻): High heat setting.
• COTTON (棉): Medium to high heat setting.
• SILK (絲): Low to medium heat setting.
• SYNTHETICS (合成纖維): Low heat setting.

Wait for the temperature indicator light to turn off, signifying that the iron has reached the selected temperature.

Steam Functions

The Philips Azur 7000 Series iron offers various steam functions to tackle different fabrics and creases:

• Continuous Steam: Provides a steady flow of steam for general ironing.
• Steam Boost: Delivers a powerful burst of steam to remove stubborn creases.
• Vertical Steam: Allows steaming of hanging garments or curtains.
• Anti-drip: Prevents water spotting on fabrics at low temperatures.

Using the Quick Calc Release Feature

Regular descaling is crucial for maintaining the iron's performance and longevity. Follow these steps:

1. Fill the water tank with water.
2. Heat the iron to its maximum temperature setting.
3. Once the iron is hot, unplug it from the power outlet.
4. Press and hold the "Quick Calc Release" button, allowing hot water and scale particles to drain into a sink.
5. Ensure the water tank is completely emptied.

Maintenance and Care

After each ironing session, it is recommended to empty the water tank and allow the iron to cool completely before storing it safely.

For detailed cleaning instructions for the soleplate and recommended descaling frequency, please consult the full product manual.

Safety Features

Always disconnect the iron from the power supply when it is not in use, before filling or emptying the water tank, and prior to any cleaning or maintenance.

Never immerse the iron in water or any other liquid.

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, unless supervised.

The auto shut-off feature is designed to conserve energy and prevent accidents. It activates automatically if the iron is left stationary for specific periods (e.g., approximately 30 seconds when placed on its soleplate or side, and approximately 8 minutes when left on its heel rest).

Compliance Information

Restricted Substances Declaration

The following table details the presence of restricted substances in the product's components, in accordance with relevant environmental regulations.

Notes:

• "O" signifies that the percentage content of the restricted substance does not exceed the specified reference percentage value.
• "-" indicates that the restricted substance is covered by an exemption.
• "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" denote that the percentage content of the restricted substance surpasses the reference percentage value for its presence condition.

Equipment Name: Philips Steam Iron

Type Designation: DST7041