Momcozy Wearable Breast Pump M5

Product Overview

This guide provides instructions for the Momcozy Wearable Breast Pump M5. For any questions, please contact support@momcozy.com.

Brand: Momcozy

Model: M5

Website: www.momcozy.com

Getting Started

Step 1: Component Identification

The following components are included:

• A: Double Seal Flange (24mm)
• B: Membrane
• C: Valve
• D: Milk Collector (160ml)
• E: Breast Pump Motor
• F: Dust Cover

Usage Instructions

Step 2: Measuring Nipple Size

Accurate measurement is crucial for effective pumping and nipple comfort. Use the provided chart to determine the correct flange size.

Nipple Measurement Guide:

Measure your nipple diameter in millimeters (mm). Select the corresponding flange size.

Flange Size Chart:

Step 3: Assembling the Breast Pump

Follow the diagrams for correct assembly. Ensure all parts are securely attached.

Assembly Steps:

• Diagram shows assembly of flange, membrane, and valve.
• Diagram shows attachment of milk collector to flange.
• Diagram shows connection of pump motor to the assembled unit.

Step 4: Wearing the Breast Pump

Ensure the breast pump fits snugly against the breast without gaps for optimal milk production.

Wearing Instructions:

• Place the flange into your bra.
• Ensure the nipple is centered within the flange tunnel.
• Adjust bra for a comfortable and secure fit.

Operation

Step 5: Pump Operation

Controls:

• 1. On/Off/Pause: Press and hold to turn the device on/off. Short press to pause/resume pumping.
• 2. LED Display: Shows battery status and mode.
• 3. Decrease: Decreases intensity level.
• 4. Increase: Increases intensity level.
• 5. Mode Selection: Cycles through different pumping modes.
• 6. Charging Port: For charging the device.

Pumping Modes:

• Stimulation: Short, rapid suction pattern to initiate milk flow.
• Expression: Slower suction pattern for efficient milk extraction.
• Mixed: Combines stimulation and expression patterns.

Step 6: Battery Status

• Flashing low battery: Battery is low.
• Solid light: Charging.
• All lights on: Fully charged.

Maintenance and Care

Step 7: Cleaning and Replacing Parts

Replace washable components every 1-3 months for optimal hygiene and performance.

Cleaning Instructions:

• Washable components: Flange, Membrane, Valve, Milk Collector.
• Non-washable components: Pump Motor.
• Wash components with warm, soapy water. Rinse thoroughly.
• Air dry completely before reassembly.
• Avoid submerging the pump motor in water.

Important Note: Keep components away from the edges of the heated container when sterilizing.

Troubleshooting

If you encounter any issues, refer to the troubleshooting section in the full manual or contact customer support.

Additional Information

User Manual: Scan the QR code for the full user manual.

Nipple Measurement Guide: Scan the QR code for detailed measurement instructions.