Inateck BCST-72 Barcode Scanner User Guide

Introduction

This user guide provides instructions for the Inateck BCST-72 Barcode Scanner. Configuration should be done using the "Inateck Scanner" app, available on the App Store and Google Play. You can also download the app by scanning the provided QR code. For any questions, please contact Inateck customer support.

Languages supported for configuration: English, German, Japanese, French, Italian, Spanish.

Product Illustration

The scanner features the following components:

• ① Laser Window
• ② Trigger
• ③ USB Port
• ④ Power Switch
• ⑤ Buzzer
• ⑥ LED1
• ⑦ LED2
• ⑧ Shockproof Cover

Getting Started

1. How to Power On/Off

ON: Toggle the power switch from OFF to ON. Short press the trigger to emit the red laser beam and scan barcodes.

OFF: Toggle the power switch from ON to OFF.

Product Specifications

Package List

• BCST-72*1
• A-B Cable*1
• Instruction Manual*1
• 2.4GHz Wireless Adapter*1

Battery Safety Warning

This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions:

• Do not dismantle, hit, crush, or expose the battery to fire.
• If the battery experiences severe swelling, discontinue use immediately.
• Avoid placing the battery in high-temperature environments.
• Do not use the battery if it has been immersed in water.
• During transportation, do not mix the battery with metallic objects.

Regulatory Information

FCC Note

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.

EU Declaration of Conformity

Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU. A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/inateck-euro-compliance.

CE ⧓⚄⚀

Service Center

Europe

F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM - 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland

North America

Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM - 5PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA

Japan

Inateck 株式会社
電話番号: +81 06 7500 3304
〒547-0014 大阪府大阪市平野区長吉川辺3丁目10番11号

Manufacturer

Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China
Email: product@licheng-tech.com
Postal code: 518129

EC REP
F&M Technology GmbH
Fraunhoferstraße 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Email: service@inateck.com
Postal code: 04178

UK REP
Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL
Tel: +44 20 3239 9869