Victrola Eastwood Signature VTA-73 Instruction Manual

Contents

• Safety Instructions
• Product Overview
• Setup/Basic Operation
• Vinyl Record Operation
• Bluetooth Operation
• Bluetooth-Out Operation
• Maintenance/Proper Handling
• Specifications
• Troubleshooting Guide
• WEEE & CE Statements

Safety Instructions

WARNING

• Always follow basic safety precautions, especially when children are present.
• Supervise children to ensure they do not play with the appliance.
• Do not damage the power cord; do not place heavy objects on it, stretch, or bend it. Do not use extension cables, as damage may cause fire or electric shock.
• If the supply cord is damaged, it must be replaced by the manufacturer, a service agent, or similarly qualified persons to avoid a hazard.
• Ensure the unit is plugged into an AC 100-240V 50/60Hz power outlet. Higher voltage may cause malfunction or fire.
• If the power plug does not fit your outlet, do not force it.
• Turn off the unit before unplugging it from the power source.
• Do not disconnect or connect the power cord with wet hands; this may cause electric shock.
• Ensure the mains plug is always easily accessible.
• This product contains no user-serviceable parts. For faults, contact the manufacturer or authorized service department. Exposing internal parts may be dangerous. The manufacturer's guarantee does not cover faults from unauthorized repairs.
• Do not use the product immediately after unpacking. Wait until it warms up to room temperature.
• Use this product only in moderate climates (not tropical/subtropical).
• Place the product on a flat, stable surface not subject to vibrations.
• Ensure the product and its parts do not overhang the edge of the supporting furniture.
• To reduce the risk of fire, electric shock, or damage, do not expose the product to direct sunlight, dust, rain, or moisture. Never expose it to dripping or splashing, and do not place objects filled with liquids on or near the product.
• Do not place objects filled with liquids, such as vases, on the apparatus.
• Do not install near heat sources like radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not place the product where humidity is high and ventilation is poor.
• Do not mount this product on a wall or ceiling.
• Do not place the unit near TVs, speakers, or other objects generating strong magnetic fields.
• Do not leave the unit unattended when in use.
• Allow at least 30 cm clearance from the rear and top, and 5 cm from each side. Ensure ventilation openings are not covered by items like newspapers, tablecloths, or curtains.
• NEVER let anyone, especially children, push anything into holes, slots, or other openings in the unit's casing, as this could result in a fatal electric shock.
• Storms are dangerous for electric appliances. If lightning strikes the main or aerial wiring, the appliance might get damaged even if turned off. Disconnect all cables and connectors before a storm.
• Excessive sound pressure from headphones can cause hearing loss.
• Do not cover ventilation openings; this unit is not intended for use on soft support.

MAINTENANCE

• Unplug the power cable before cleaning.
• Use a soft, clean rag to clean the exterior. Never use chemicals or detergent.

Safety Instructions (Power Adapter)

POWER ADAPTER

• To disconnect the unit from the main supply, unplug the lead from the main socket.
• Only use the supplied main adapter; failure to do so may result in a safety risk and/or damage to the unit.
• The main plug of the power adapter serves as the disconnect device. The socket-outlet should be installed near the equipment and be easily accessible.

TO PREVENT FIRE OR SHOCK HAZARD: DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. ⚡ [High Voltage]

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PROFESSIONAL. ❗ [Risk of Electric Shock - Do Not Open]

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. ❗ [Important Operating and Maintenance Information]

Please read these safety instructions and respect the following warnings before the appliance is operated:

• ~ [AC Voltage]
• ⎓ [DC Voltage]
• [Class II Equipment]
• [Indoor Use Only]
• [Energy Efficiency Level VI]
• [DC Power Connector Polarity]

• Refers to alternating current (AC). This symbol indicates that the rated voltage marked with the symbol is AC voltage.

• Refers to class II equipment. This symbol indicates that this product has a double insulation system and does not require a safety connection to electrical earth (ground).

• The symbols shown above appear on electrical and electronic equipment to remind users of this (or on the packaging).

• Users are requested to use existing return facilities for used equipment and batteries.

ACCESSORIES INCLUDED

• INSTRUCTION MANUAL
• POWER ADAPTOR
• SILICONE SLIPMAT

Product Overview

Front View

The front panel features the following controls and indicators:

• 1. POWER: Press to turn the unit ON or OFF.
• 2. BT OUT: Press to activate the Bluetooth output function.
• 3. PLAY/PAUSE: Press to start playback, press again to pause. Long press for 3 seconds to disconnect Bluetooth pairing (this button only works in Bluetooth mode). (▶️/⏸️)
• 4. PREVIOUS: Skip to the previous track or station. (⏪)
• 5. NEXT: Skip to the next track or station. (⏩)
• 6. Display Screen: Shows status information.
• 7. 3.5mm EARPHONE JACK: Accepts headphone/earphone plugs for private listening.
• 8. BT/PHONO KNOB: Turn to select BT (Bluetooth) or PHONO mode.
• 9. VOLUME KNOB: Turn to adjust the volume level.

Rear View

The rear panel includes connection ports:

• 10. LINE OUT jacks: For connecting to an amplifier device with RCA auxiliary input sockets. Insert the white and red plugs of the RCA cable into the unit, ensuring the white plug connects to the white jack and the red plug to the red jack. Connect the other end to the amplifier device.
• 11. DC Input Jack: Connect the power adapter here to power on the unit.

Part of the Turntable

The turntable mechanism includes:

• 12. Turntable: The rotating platter where records are placed.
• 13. 45 RPM adapter: Used for playing 45 RPM records.
• 14. Tone Arm holder: Secures the tone arm when not in use.
• 15. Cue Lever: Before use, gently push the Tone Arm holder to the right to release the Tone Arm.
• 16. AUTO STOP ON/OFF SWITCH: When ON, the turntable stops automatically after playback. When OFF, it continues spinning.
• 17. Speed Selector: Choose between 33-1/3, 45, or 78 RPM.
• 18. Tone Arm: Holds the stylus and tracks the record groove.
• 19. STYLUS: The needle that reads the record groove.

Setup/Basic Operation

Setup

1. Remove the white protective needle cover by gently pulling towards the front of the unit.
2. Remove any packaging materials from the unit.
3. Connect the power adapter to the DC Input jack to power on the unit.

Note: It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label.

Basic Operation

1. Press the POWER button to turn the unit on.
2. Select the mode (BT or PHONO) by turning the BT/PHONO KNOB.
3. Rotate the VOLUME KNOB to adjust to the desired sound level.

Listening through RCA LINE OUT

For amplifier device listening, first reduce the volume level to minimum. Insert the white and red plugs on the RCA cable into the unit, then insert the opposite end into the amplifier device. Ensure the white plug connects to the white jack and the red plug to the red jack.

Listening through Earbuds/Headphones (not included)

For private listening, first reduce the volume level to minimum. Insert your headphones plug into the 3.5mm jack, then adjust the volume up by turning the VOLUME KNOB.

Note: The speakers will automatically be deactivated while headphones are plugged in.

CONDENSATION WARNING

When the unit is moved from a cold or warm place, or used after a sudden temperature change, water vapor may condense on the unit, preventing proper operation. In such cases, leave the unit for 1-2 hours after plugging it into an AC outlet to allow it to stabilize at the temperature of its surroundings.

Vinyl Record Operation

1. Turn the unit ON by pressing the POWER button.
2. Turn the BT/PHONO KNOB to enter the PHONO mode.
3. Gently open the dust cover.
4. Place the record on the turntable. Select the speed. When playing a 45 RPM record, use the included 45 adapter. (Options: [33 RPM], [45 RPM], [78 RPM])
5. Gently push the Tone Arm holder to the right to release the TONE ARM.
6. Raise the Cue Lever to lift the TONE ARM off the tone arm support.
7. Move the TONE ARM gently to the edge of the record (or the starting point of the track). The turntable will begin to turn.
8. Gently lower the TONE ARM by slowly releasing the CUE LEVER. You can lower the TONE ARM manually if the CUE LEVER has not been raised.
9. Turn the VOLUME KNOB to adjust the volume.
10. When playback has finished, slightly lift the tone arm using the CUE LEVER and return it to the TONE ARM holder.

Auto and Manual Stop Selection Switch: If this switch is turned ON, the record will start spinning when the tone arm moves over the record and will stop automatically when playback is finished. If this switch is OFF, the record will automatically begin to spin when the unit is in "VINYL" function mode and will continue to spin after playback is finished. ([AUTO STOP ON/OFF Switch])

Bluetooth Operation

An external device with Bluetooth Connectivity can be wirelessly connected to this turntable using the Bluetooth Function.

GETTING CONNECTED USING BLUETOOTH

1. Turn the BT/PHONO KNOB to select BT mode. The "bt" will flash on the Display Screen.
2. Turn your external device's Bluetooth Setting ON. Wait a moment, then look for the Bluetooth Pairing name "Eastwood Signature".
3. Note: The effective distance between your external device and this unit is 10 meters (33ft).
4. Select the "Eastwood Signature" Bluetooth pairing name to connect the unit. Once connected, the "bt" on the Display Screen will stop flashing.
5. Select music media files on your external device, then press the PLAY/PAUSE button (▶️/⏸️) to begin playback.
6. To temporarily pause playback, press the PLAY/PAUSE button (▶️/⏸️) again to resume.
7. To skip to the previous or next tracks, press the PREVIOUS/NEXT buttons (⏪/⏩) to listen.

Bluetooth-Out Operation

The product supports Bluetooth wireless connection (BT-OUT). It can be connected with external Bluetooth-compatible headphones (not included) and Bluetooth speakers (not included).

1. When playing your vinyl record, press the BT OUT button.
2. The "?" icon flashes on the Display Screen.
3. Turn ON your external Bluetooth receiver device (such as Bluetooth headphones and Bluetooth Speakers) and set it to pairing mode.
4. Wait for 5-20 seconds; they will make connection to each other automatically.
5. The "?" icon stops flashing once successfully paired.
6. Control the playback from your BT speaker. (You can only adjust the volume from your external Bluetooth Device.)

• Place the Bluetooth device within 1m (3.3') of the product to perform pairing correctly.
• The product stays in pairing mode for about 30 seconds. If pairing is not properly completed, follow the above steps again from the beginning after turning all devices OFF.
• "BT OUT" is only compatible with vinyl record playback.

Maintenance/Proper Handling

Handling Vinyl Records

• Do not touch the record's grooves. Handle records only by the edges or the label with clean hands. Touching the record surface will degrade its quality.
• To clean a record, use a soft anti-static cloth to gently wipe the record surface.
• Keep records in their protective sleeves when not in use.
• Always store records upright on their edges.
• Avoid placing records in direct sunlight, near heat sources (radiators, stoves, etc.), or in locations subject to vibration, excessive dust, heat, cold, or moisture.

How to Replace the Turntable Stylus (Replacement Stylus # ATN3600L)

Removing the Stylus from the Cartridge

1. Place your fingers at the tip of the stylus and push down in direction "A". WARNING: Applying too much force may damage or break the cartridge.
2. Pull the stylus out toward direction "B".

Installing the Stylus

1. Hold the tip of the stylus and insert the other edge by pressing toward direction "C".
2. Push the stylus up toward direction "D" until it locks at the tip.

Caution:

• Do not remove or bend the stylus needle.
• Do not touch the needle to avoid injury to your hand.
• Turn off the unit's power before replacing the stylus.
• Keep out of reach of children.

Note: The stylus should last about 300 hours under normal use. It is recommended that the stylus be replaced as soon as you notice a change in sound quality. 78 RPM records may accelerate stylus wear and may require earlier replacement.

Specifications

GENERAL

• Power Adapter: 9V/1.5A
• Power Consumption: 13.5W
• Power Output: 2 x 5W
• Size: 12.7" (322mm) W x 12.3" (312mm) D x 5.2" (131mm) H
• Weight: 4.5 lbs (2kg)
• Operating Temperature: 5°C - +40°C

RECORD PLAYER

• Speeds: 33-1/3 RPM, 45 RPM, and 78 RPM

BLUETOOTH

• Bluetooth Version: V5.1
• Bluetooth Profiles: A2DP, AVRCP
• Bluetooth Frequency Range: 2.402GHz-2.480GHz
• Operating Distance: 10 meters (33ft)
• RF Power: 1.55dBm

ADAPTOR

• Manufacturer: Shenzhen Simsukian Electronics Techology Co., Ltd.
• Model: SK01T8-0900150Z (S/N:23022101000001)
• Power: INPUT: 100-240V~50/60Hz, 0.4A Max; OUTPUT: 9V 1.5A, 13.5W

Auto Stand-by mode

After 15 minutes without any audio input, the device will automatically switch into standby mode. Please follow the instruction manual to resume operations.

INTENDED USE

This audio device is intended only for playing circuit boards. Any further use is considered improper. It is suitable only for use in dry interiors. The device is not intended for commercial use but exclusively for use in private households. Any other use or modification of the device is not intended and is strictly prohibited. No liability can be assumed for damage caused by improper use or incorrect operation.

This device can be used by children aged 8 and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they are supervised or have been instructed in the safe use of the device and understand the resulting dangers. Children are not allowed to play with the device. Cleaning and user maintenance must not be carried out by children unless they are older than 8 years and supervised. Keep the packaging film away from children; there is a risk of suffocation. Children younger than 8 years must be kept away from the device and the connection cable.

Troubleshooting Guide

WEEE & CE Statements

Declaration of Conformity

This device complies with the essential requirements and other relevant provisions of:

1. RED directive: 2014/53/EU
2. Low voltage directive: 2014/35/EU
3. ROHS directive: 2011/65/EU

You can download the complete EU conformity declaration from www.victrola.com/eudoc.

WEEE Directive

The New Recast WEEE Directive (DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE)).

1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
2. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
3. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service.

Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice.

Made in China.

Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

This product has been manufactured and sold under the responsibility of Innovative Technology Electronics LLC. Victrola is a trademark used under license by Innovative Technology Electronics LLC. – further information at victrola-brand.com. All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners.

Manufacturer Information:

Innovative Technology Electronics, LLC
3513 Brighton Blvd, Suite 570
Denver, CO 80216, USA

Imported by:

EU authorized representative
Possible-Music S.A.S.
40 Rue Du Louvre
75001 Paris, France

CMS Distribution Ltd,
EC2A 2DT
Registered in England No. 2214562

NITAL S.p.A
Via vittime di piazza fontana 54
10024 Moncalieri (Torino) Italy

For importer information, visit www.victrola.com/importer.