AUKEY MagFusion Slim 5000
User Manual
Model: PB-MS03
Charging Capabilities
Charging Your Phone or Tablet Using Charging Cables
Connect your phone or tablet to the power bank using a charging cable to replenish its battery.
Charging Your Phone Wirelessly
Place your Qi-compatible phone on the designated wireless charging surface of the power bank to initiate wireless charging.
Charging Devices Wirelessly and Using Cables Simultaneously
The power bank allows for simultaneous wireless charging of a device and wired charging of another device via its USB port.
Small Current Mode
This mode is suitable for devices with small battery capacity, low charging power, and low current, such as Bluetooth earbuds and smartwatches. To enter Small Current Mode, double-press the power button.
To exit Small Current Mode, single-press the power button.
Recharging Your Power Bank
To recharge the power bank, connect it to a power source using a USB-C cable.
Charging status indicators:
- 0%-25%
- 25%-50%
- 50%-75%
- 75%-100%
Button Operation
Double Press: Enter Small Current Mode.
Long Press for 2s: Turn off the power bank.
Single Press: Exit Small Current Mode.
Product Care and Precautions
- Keep away from liquids and extreme heat.
- Do not impact or drop the product.
- Do not leave the product in the car for a long time.
- Do not disassemble or modify the product.
- If the product emits smoke, leaks liquid, or has an abnormal smell (e.g., burnt smell), stop using it immediately and contact the support center.
- Recharge the power bank at least once every 3 months to maintain battery health.
- Dispose of batteries according to local environmental laws.
Specifications
Feature | Details |
---|---|
Model | PB-MS03 |
Battery Capacity | 5000mAh / 19.25Wh |
Battery Type | Lithium polymer |
Input | USB-C in: 5V 2A |
Output (USB-C) | 5V 3A / 9V 2.22A / 12V 1.67A (20W Max) |
Output (Wireless) | 15W (Max) / 10W / 7.5W / 5W |
Total Output | 20W |
Dimensions | 103.3 x 66.7 x 12.7mm / 4.07" x 2.63" x 0.50" |
Weight | 128g / 4.52oz |
Operating Temperature | 0~35℃ / 32~95℉ |
Storage Temperature | -10~40℃ / 14~104℉ |
Compliance
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Declaration of Conformity
This product is intended for use within Europe. This equipment complies with the essential requirements for the Radio Equipment Directive 2014/53/EU. AUKEY Technology Co., Ltd. hereby declares that this product PB-MS03 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU, 2014/30/EU. The Declaration of Conformity for the PB-MS03 is available from www.aukey.com.
This product complies with the radio interference requirements of the European Community.
Recycling Information: This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Customer Support
Follow Us to Unlock More about AUKEY:
@AUKEYofficial | @AUKEYofficial | AUKEYofficial | @aukeyofficial
For questions, support, or warranty claims, please contact your seller directly.
Website: www.aukey.com
Email: support@aukey.com