IMILAB EC4 Spotlight Battery Camera Set
User Manual
Read this manual carefully before use, and retain it for future reference.
Getting started
For camera installation
- IMILAB EC4: A circular camera unit with a lens and a spotlight on the front.
- Micro-USB Charging Cable: A standard USB-A to Micro-USB cable.
- Mounting Bracket: A circular plate with screw holes and a central mounting mechanism.
- Mounting Screws and Anchors: Screws and plastic wall anchors for installation.
For hub installation
- IMILAB Smart Hub: A rectangular, vertical device with ventilation slots on top.
- Power Adapter: A wall plug adapter with a cable.
- Ethernet Cable: A standard network cable.
1. Camera quantity and accessories vary by bundle package.
2. Hub power adapter varies by region.
Product overview
Hub
Front view of the IMILAB Smart Hub: A simple rectangular device.
Back view of the IMILAB Smart Hub: Shows ports labeled "Power", "Ethernet", "USB", "Reset", and "Alarm". Also shows ventilation slots and a MicroSD card slot.
| Component | Description |
|---|---|
| 1. Status LED | Indicates the operational status of the hub. |
| 2. MicroSD Card Slot | Slot for inserting a MicroSD card for storage. |
| 3. Speaker | Outputs audio alerts or notifications. |
| 4. Reset Button | Used to reset the hub to factory settings. |
| 5. Power Port | Connects to the power adapter. |
| 6. Ethernet Port | Connects to the home router via an Ethernet cable. |
| 7. USB Charging Port | Used for charging or data transfer. |
| 8. Alarm | Indicates an alarm status or event. |
Camera
Front/Side view of the IMILAB EC4 camera: Shows the lens, spotlight, light sensor, motion sensor, microphone, status LED, and mounting hole.
Back view of the IMILAB EC4 camera: Shows the speaker and mounting hole.
Detail view: Shows the USB charging port.
| Component | Description |
|---|---|
| 1. Spotlight | Provides illumination in low-light conditions. |
| 2. Lens | Captures video footage. |
| 3. Light sensor | Detects ambient light levels. |
| 4. Motion sensor | Detects movement. |
| 5. Microphone | Captures audio. |
| 6. Status LED | Indicates the operational status of the camera. |
| 7. Mounting hole | For attaching the camera to the mounting bracket. |
| 8. Speaker | Outputs audio alerts or notifications. |
| 9. SYNC Button | Used for pairing or synchronization. |
| 10. USB Charging Port | For charging the camera's battery. |
Connecting the hub
- Use the provided Ethernet cable to connect the hub to your home router.
- Power on the hub.
Diagram: Shows the hub connected via Ethernet cable to a router and powered on. An arrow points to the status LED.
The status LED indicator turns flashing orange, indicating the hub is ready for setup.
Status LED diagram: Shows the hub with a single LED indicator.
Setting up the system
Download the app and set up the system
- Download the Imilab Home APP from the app store (iOS devices) or Google Play (Android devices). A QR code is provided for easy access.
- Sign up for an Imilab home account, then follow the onscreen instructions to complete the setup.
Diagram: Illustrates a smartphone displaying the Imilab Home app logo, with wireless signal waves connecting to the camera and hub, indicating the pairing process.
Mounting the camera
Select height and location
1. Hang the camera 7-10 ft (2-3m) above the ground. This height maximizes the detection range of the motion sensor of the camera.
Diagram: Illustrates the camera mounted on a wall at the recommended height (7-10 ft / 2-3m), showing the camera's field of view and the motion detection zone extending up to 26 ft (8m).
Mount the camera
The camera can be mounted both indoors and outdoors.
1. Drill two holes on the wall using the base of the IMILAB EC4 as a template. It is recommended to mark the locations of the holes with a pencil before drilling. The diameter of each hole is approximately 6 mm, and the depth is approximately 30mm.
Diagram: Shows a drill bit creating holes in a wall.
2. Insert the anchors into the holes.
Diagram: Shows wall anchors being inserted into the drilled holes.
3. Firmly screw the base of the mounting bracket onto the wall.
Diagram: Shows the mounting bracket base being screwed onto the wall.
4. Match the bottom groove of the camera mounting base with the raised area on the bracket base. Press down until the two surfaces are flush, then turn it in either direction to lock it in place.
Diagram: Shows the camera's mounting base aligning with the bracket's raised area, pressing down, and then rotating to lock. Arrows indicate the rotation direction.
5. Tighten the camera to the mounting bracket and adjust the viewing angle by checking the live stream feed in the app.
Diagram: Shows a hand attaching the camera to the mounted bracket and adjusting its angle. Arrows indicate the adjustment motion.
Warning: To avoid any damages or injuries, the device must be securely fastened to the ceiling/wall as specified in the installation instructions.
Warning: When mounting the security camera on a wall: Please note that the wall must be able to support at least triple the product's total weight.
Charging the camera
Method 1
Diagram: Shows the IMILAB Smart Hub with a USB cable connecting from its USB port to the IMILAB EC4 camera's USB charging port.
Method 2
Diagram: Shows a 5V USB Charger plugged into a wall outlet, with a USB cable connecting from the charger to the IMILAB EC4 camera's USB charging port.
Explanations for LEDs
Hub LED Status
| Hub LED Status | Status |
|---|---|
| Blinking blue | Network connection is in progress / not connected |
| Solid blue | Network connection is successful / connected |
| Blinking orange | Waiting for connection / device and app binding in progress |
| Solid orange | The hub is booting up / Reset successfully / A firmware update is in progress |
| Blue and orange flashes 3 times alternately | Firmware update failed |
| Indicator light changes to solid orange after pressing and holding the reset button for 5 seconds, then release the button. | During the reset process, the hub will restart. Reset is successful and you can start binding. |
| Blinking orange (after reset) | Reset is successful and you can start binding. |
Camera LED Status
| Category | Camera LED Status | Status |
|---|---|---|
| Power on/off | Press and hold the sync button for 2 seconds until the blue light becomes solid. | You will hear the power-on music. |
| Press and hold the sync button for 15 seconds until the LED blinks red. | You will hear the power-off music. | |
| Camera charging | Use USB to charge the camera, Red blinks three times. | Starts charging. |
| Solid green. | Fully charged. | |
| Camera reset | Press and hold the sync button for 8 seconds until the LED blinks blue, then release the button. | Start resetting (The camera will reboot during the reset process). |
| Blinking blue. | Reset successfully. | |
| Solid blue (turn off after 5 seconds). | Pairing Successful. | |
| PIR detection sensitivity adjustment | Blue and orange blinks 3 times alternately. | Pairing Failed. |
| Orange blinks once. | PIR detects motion. | |
| Orange blinks continuously. | PIR continues to detect motion. |
Safety statement
Specifications
IMILAB EC4
Name: IMILAB EC4
Model: CMSXJ31A
Resolution: 2560x1440
Aperture: F1.6
Power Input: 5 V ⎓ 2 A
Item Dimensions: 82 x 86.8 x 50 mm
Operating Temperature: -20 °C ~ 50 °C
FCC ID: 2APA9-CMSXJ31A
IMILAB Smart Hub
Name: IMILAB Smart Hub
Model: CMWG31B
Power Input: 12 V ⎓ 1.5 A
Item Dimensions: 89.2 x 38 x 101.3 mm
Operating Temperature: -10 °C ~ 45 °C
Expandable Memory: MicroSD card (up to 64 GB)
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Wired Connection: A 10/100M Self-adaptive ethernet interface
FCC ID: 2APA9-CMWG31B
Precautions
- The suitable operating temperature range for this product is between -20°C to 50°C. Do not use the product in an environment with temperatures above or below the specified range.
- When charging, the operating temperature range for this product is between 0°C to 45°C. Do not charge the product in an environment with temperatures above or below the specified range.
- Using the product in a low temperature environment or during charging status will affect its standby time. The actual standby time is related to the user's environment and habits.
- To improve the product's performance, please do not place the camera lens facing or next to a reflective surface, such as glass windows/doors and white walls, which will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or cause the camera to produce white images.
- Please install the product in areas with Wi-Fi reception, and try to place the device where the Wi-Fi signal is strong. In addition, please keep the security camera away from metal structures, microwave ovens, or other locations where signal strength may be impacted.
- Do not replace the battery in the camera yourself; if not properly replaced, there is a danger of explosion.
- Battery (battery pack or batteries) must not be exposed to sunlight, fire, or similar overheating conditions.
- This product is a low power consumption camera with a built-in battery. Do not use the Real-Time Monitoring feature for a long time when charging, in order to avoid battery life loss.
- Do not use the device in environments with excessively high or low temperatures; never expose the device under strong sunshine or in a too wet environment.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC 20cm Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
WEEE Information
WEEE Symbol: [Crossed-out wheeled bin icon]
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
EU Declaration of Conformity
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMILAB EC4 is in compliance with Directive 2014/53/EU.
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMILAB Smart Hub is in compliance with Directive 2014/53/EU.
