TFA.me ID-01 WLAN Gateway

Introduction

Thank you for choosing this TFA product. This manual provides detailed instructions for the setup, operation, and maintenance of your TFA.me WLAN Gateway.

Delivery Contents

• WLAN Gateway
• Power adapter for Gateway
• Quick start guide

Before You Use This Product

Please read the instruction manuals carefully. Following and respecting the instructions will prevent damage to your instrument and loss of statutory rights. TFA shall not be liable for any damage occurring as a result of non-following of these instructions or for incorrect readings.

Pay particular attention to the safety and disposal instructions in the Quick set-up guide supplied with the device. Keep all instruction manuals safe for future reference.

Instruction Manuals

The following manuals are available:

• Instruction manual for 35.8103.02 (D-GB): This instruction manual provides a functional description of the WLAN Gateway.
• Quick set-up guide for 35.8103.02 (D-GB-F-I-NL-E): Covers getting started, specifications, safety notices, waste disposal, and declaration of conformity. Available via the delivery content and homepage.
• Manual TFA.me general (D-GB): Available via the go.tfa.me Web Portal, covering getting started and functional description of the TFA.me portal.
• FAQ Frequently asked questions (D-GB): Available via the go.tfa.me Web Portal, covering general questions and answers, and questions about the TFA.me portal and initial setup.

For Your Safety

This product is exclusively intended for the range of application described. It should only be used as described within these instruction manuals. Unauthorised repairs, alterations, or changes to the devices are prohibited.

Range of Application and Benefits

• Receives and forwards data from up to 50 TFA-ID transmitters.
• Enables online access to measured values on the TFA.me platform.
• Display shows indoor temperature and humidity, and values from up to 5 transmitters (not included).
• Displays time with date or weekday (available in 6 languages).
• Suitable for free-standing placement.
• Dimensions and weight: 70 x 69 x 70 mm, 103 g.
• Power adapter included; 3 x AAA batteries (backup) not included.

TFA.me Online Portal

After registering at go.TFA.me, you can monitor and analyze the measured values of indoor sensors and up to 50 TFA-ID transmitters within the transmission range online. The TFA.me portal offers an alarm function via email, a clear diagram function, export options, and data storage for at least 12 months. Language settings are German or English.

Gateway Components

1. Display

• 1.1 Time: Displays the current time.
• 1.2 WIFI reception symbol: Indicates the strength of the Wi-Fi connection.
• 1.3 Indicator for ID: Shows the transmitter ID.
• 1.4 Date/weekday/info box: Displays the date, weekday, or other information.
• 1.5 Channel 1/2/3/4/5: Indicates the selected channel for transmitter data.
• 1.6 Transmitter reception symbol: Shows the reception status from a transmitter.
• 1.7 Humidity: Displays the humidity level.
• 1.8 Temperature: Displays the temperature.
• 1.9 Circle symbol for alternating channel: Indicates automatic channel switching.
• 1.10 Indoor or outdoor values: Differentiates between indoor and outdoor measurements.
• 1.11 Battery symbol for the gateway/transmitter: Indicates battery status.

2. Button & Housing

• 2.1 CHANNEL button: Cycles through channels or initiates manual transmitter search.
• 2.2 SET button: Enters setting mode or confirms settings.
• 2.3 + button: Adjusts values or selects options.
• 2.4 GATEWAY button: Used for specific gateway functions.
• 2.5 Power adapter jack: Connection for the power adapter.
• 2.6 Battery compartment: Holds backup batteries.
• 2.7 Device ID (on the bottom): The unique identifier for the gateway.

Operation

Selection of Calendar Display and Language

1. Press and hold the SET button for three seconds to enter the setting mode.
2. The DATE/DATE (default) will flash. Use the + button to choose between DATE, WEEKDAY, or ALTERNATE (changing every 5 seconds) for the permanent display.
3. Press the SET button again. GERMAN (default) will flash.
4. Use the + button to select the language for the weekday and menu: GERMAN, ENGLISH, DUTCH, SPANOL, ITALIANO, FRANCAIS. Selecting ENGLISH will display weekdays and menu in English.
5. Press the SET button again to return to normal mode. The device will automatically save settings if no button is pressed for 20 seconds.

Display

The gateway display shows the time (hours, minutes, seconds), indoor temperature, and relative humidity at the installation location.

Display of Outdoor Transmitters (Optional)

• Up to 5 compatible temperature-humidity transmitters can be displayed. First, set up and register the transmitter(s) as per the quick set-up guide and manual transmitter search.
• Press the CHANNEL button to switch between indoor (IN) and outdoor (OUT) values for channels 1 to 5. The gateway and transmitter ID numbers will briefly appear, followed by the outdoor values.
• An automatic channel display can be activated by pressing the CHANNEL button. A circle symbol appears after the last registered channel. Press the CHANNEL button again to deactivate this function.
• Transmitter ID: Each transmitter has a unique nine-digit alphanumeric ID. This ID is attached to the transmitter. Pressing and holding the TX button in the transmitter's battery compartment for 5 seconds displays the ID on the transmitter's screen.

Loss of Transmitter Signal

• If the signal is lost after successful reception, the last transmitted values are displayed for 30 minutes, after which “- -” appears. The reception symbol disappears.
• After 60 minutes without an update, the gateway automatically searches for the registered transmitter for 5 minutes. If reception fails, the search repeats every 60 minutes. The reception symbol flashes during the search.
• Note: Only previously registered transmitters (with individual IDs) are searched for. New transmitter IDs are only received during the initial device startup or manual transmitter search.

Manual Transmitter Search

• Select the desired channel using the CHANNEL button.
• Press and hold the CHANNEL button for three seconds. A beep will sound, cancelling any registered transmitter ID on that channel and initiating the search.
• The reception symbol will flash. Briefly press the TX button in the transmitter's battery compartment to transmit data. Outdoor values will appear on the gateway display upon successful reception.

Energy Supply

• The gateway requires the supplied mains adapter for normal operation.
• 3 x 1.5V AAA batteries (not included) maintain function and settings during a power failure.
• In battery-only operation, the gateway enters energy-saving mode, disabling Wi-Fi and online connection.

Battery Replacement

• Replace transmitter batteries when the battery symbol appears alongside transmitter measurements.
• Replace gateway backup batteries if the battery symbol appears alongside indoor values, or if no backup batteries are inserted.
• If the voltage drops to the minimum limit in battery operation, the battery symbol will flash, indicating a high risk of system crash. Change the gateway batteries immediately.

Repeated Start-up

• If the device has been previously operated, it will attempt to connect to the internet and server automatically upon plugging in the mains adapter, indicated by a flashing Wi-Fi symbol.
• A stable Wi-Fi symbol indicates a successful connection to the local Wi-Fi and internet. A stable frame around the Wi-Fi symbol indicates a server connection.
• If the server has a location setting for the device ID, the correct local time and date will be received within 10-20 seconds.
• The transmitter reception symbol flashes during startup. Briefly press the TX button in the transmitter's battery compartment to add a new transmitter.

Checking Device IDs

Gateway

To display the gateway's 9-digit device ID, select the indoor values display using the CHANNEL button.

WIFI-Version, Firmware-Version and Current IP Address

Press and hold the + button for 3 seconds in normal mode. The display will show:

• WIFI version (e.g., 'WIFI XXXX') for 4 seconds.
• Firmware version (e.g., 'FW XXXX') for 4 seconds.
• First 3 digits of IP address (e.g., 'IP XXX.') for 4 seconds.
• Remaining 9 digits of IP address (e.g., 'XXX.XXX.XXX') for 4 seconds.

If not connected to a network, dashes (“----“) will be shown for the IP address. In AccessPoint-Mode, the pre-programmed IP is shown. After connecting to the local network, the local IP address is displayed.

Factory-Reset

In case of malfunction or to reset all settings to factory defaults, press and hold the + and CHANNEL buttons simultaneously for 5 seconds. A beep will sound, and 'RESET' will appear on the display with a changing symbol. After approximately 30 seconds, another signal tone will sound. The device must then be put into operation again (refer to the quick set-up guide).

Installation

Positioning of the Gateway and Optional Transmitters

• Place the gateway on a flat, even surface.
• Avoid placing the gateway near sources of interference like computer screens, TV sets, or solid metal objects.
• Do not place the gateway near heaters, other heat sources, or in direct sunlight.
• Install transmitters as described in their respective manuals.
• Check transmission range (up to 100 m in open areas). Range may be reduced by solid walls, especially those with metal parts. Relocate transmitters or the gateway if necessary.
• Ensure the gateway has sufficient Wi-Fi signal reception at the installation location.

Care and Maintenance

• Clean devices with a soft, damp cloth. Do not use solvents or scouring agents.
• Remove batteries and unplug the power adapter if the device will not be used for an extended period. Store devices in a dry place.

Troubleshooting

For more troubleshooting information, see the FAQs on the TFA website.

If your device still does not function correctly, please contact the retailer where you purchased the product.

Contact Information

TFA Dostmann GmbH & Co. KG
Zum Ottersberg 12
97877 Wertheim | Germany
Email: info@tfa-dostmann.de
Website: www.tfa-dostmann.de